INFO buildroot.py:667: Mock Version: 6.2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/results DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/results INFO buildroot.py:318: calling preinit hooks DEBUG buildroot.py:723: create skeleton dirs DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/rpm DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/yum DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/dbus DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/dbus DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/log DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/log DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/cache/dnf DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/cache/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/cache/yum DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/cache/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/rpm DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/tmp DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/tmp/ccache DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/tmp/ccache DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/tmp DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf/vars DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf/vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum.repos.d DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum.repos.d DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/pts DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/pts DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/shm DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/shm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/mapper DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/mapper DEBUG buildroot.py:867: kernel version == 6.6.96-200.eswin.fc42.riscv64 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/fstab DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum/yum.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf/dnf.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/log/yum.log DEBUG buildroot.py:332: rootdir = /var/lib/mock/f42-spacemit-83-30-bootstrap/root DEBUG buildroot.py:333: resultdir = /var/lib/mock/f42-spacemit-83-30-bootstrap/results DEBUG package_manager.py:63: searching for 'dnf5' package manager or alternatives INFO buildroot.py:181: Package manager dnf5 detected and used (fallback) DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/mock DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/mock DEBUG package_manager.py:404: copying CA trust dir into chroot: /etc/pki/ca-trust => /etc/pki/ca-trust DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust with files from /etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/./extracted DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/./extracted DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/./source DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/./source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/edk2 DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/edk2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/java DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/java DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/openssl DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/openssl DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/pem DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/pem DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/pem/directory-hash DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/pem/directory-hash DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/source/anchors DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/source/anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/source/blocklist DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/source/blocklist DEBUG package_manager.py:404: copying CA trust dir into chroot: /usr/share/pki/ca-trust-source => /usr/share/pki/ca-trust-source DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source with files from /usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source/./anchors DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source/./anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source/./blocklist DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source/./blocklist DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share DEBUG package_manager.py:388: Copying /usr/share/distribution-gpg-keys to the bootstrap chroot DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['cp', '-a', '/usr/share/distribution-gpg-keys', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf DEBUG package_manager.py:691: configure DNF vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'rprivate,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/proc', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,nodev,noexec,nosuid,readonly,rprivate,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'rprivate,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/sys', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,nodev,noexec,nosuid,readonly,rprivate,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/shm DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/shm'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/pts DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'devpts', '-o', 'gid=5,mode=0620,ptmxmode=0666,newinstance', 'devpts', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/pts'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'bind', '/tmp/mock-selinux-plugin.w22e1hfw', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc/filesystems'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys/fs/selinux DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys/fs/selinux'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/installation-homedir DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/installation-homedir DEBUG package_manager.py:295: ['/usr/bin/dnf5', '--installroot', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/', 'install', 'dnf5', 'dnf5-plugins', '--setopt=deltarpm=False', '--setopt=allow_vendor_change=yes', '--allowerasing'] DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/usr/bin/dnf5', '--installroot', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/', 'install', 'dnf5', 'dnf5-plugins', '--setopt=deltarpm=False', '--setopt=allow_vendor_change=yes', '--allowerasing', '--setopt=tsflags=nocontexts'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/installation-homedir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'LC_MESSAGES': 'C.UTF-8'} and shell False DEBUG util.py:459: Updating and loading repositories: DEBUG util.py:459: build 100% | 11.4 MiB/s | 14.1 MiB | 00m01s DEBUG util.py:459: Repositories loaded. DEBUG util.py:461: Package Arch Version Repository Size DEBUG util.py:461: Installing: DEBUG util.py:461: dnf5 riscv64 5.2.13.1-1.fc42 build 2.4 MiB DEBUG util.py:461: dnf5-plugins riscv64 5.2.13.1-1.fc42 build 1.2 MiB DEBUG util.py:461: Installing dependencies: DEBUG util.py:461: alternatives riscv64 1.33-1.fc42 build 58.0 KiB DEBUG util.py:461: audit-libs riscv64 4.0.3-2.fc42 build 327.1 KiB DEBUG util.py:461: basesystem noarch 11-22.fc42 build 0.0 B DEBUG util.py:461: bash riscv64 5.2.37-1.fc42 build 8.0 MiB DEBUG util.py:461: bzip2-libs riscv64 1.0.8-20.fc42 build 68.3 KiB DEBUG util.py:461: ca-certificates noarch 2024.2.69_v8.0.401-6.fc42 build 2.6 MiB DEBUG util.py:461: coreutils-single riscv64 9.6-4.fc42 build 1.4 MiB DEBUG util.py:461: crypto-policies noarch 20250214-1.gitff7551b.fc42 build 137.2 KiB DEBUG util.py:461: curl riscv64 8.11.1-4.fc42 build 471.2 KiB DEBUG util.py:461: cyrus-sasl-lib riscv64 2.1.28-30.fc42 build 2.1 MiB DEBUG util.py:461: elfutils-default-yama-scope noarch 0.193-2.fc42 build 1.8 KiB DEBUG util.py:461: elfutils-libelf riscv64 0.193-2.fc42 build 1.2 MiB DEBUG util.py:461: elfutils-libs riscv64 0.193-2.fc42 build 748.1 KiB DEBUG util.py:461: fedora-gpg-keys noarch 42-1.1.riscv64_spacemit_0 build 128.2 KiB DEBUG util.py:461: fedora-release noarch 42-26 build 0.0 B DEBUG util.py:461: fedora-release-common noarch 42-26 build 20.2 KiB DEBUG util.py:461: fedora-release-identity-basic noarch 42-26 build 674.0 B DEBUG util.py:461: fedora-repos noarch 42-1.1.riscv64_spacemit_0 build 6.8 KiB DEBUG util.py:461: file-libs riscv64 5.46-3.fc42 build 11.9 MiB DEBUG util.py:461: filesystem riscv64 3.18-37.0.riscv64.fc42 build 113.0 B DEBUG util.py:461: findutils riscv64 1:4.10.0-5.fc42 build 1.9 MiB DEBUG util.py:461: fmt riscv64 11.1.4-1.fc42 build 243.0 KiB DEBUG util.py:461: gdbm-libs riscv64 1:1.23-9.fc42 build 117.3 KiB DEBUG util.py:461: glib2 riscv64 2.84.2-1.fc42 build 14.8 MiB DEBUG util.py:461: glibc riscv64 2.41-5.0.riscv64.fc42 build 4.6 MiB DEBUG util.py:461: glibc-common riscv64 2.41-5.0.riscv64.fc42 build 999.0 KiB DEBUG util.py:461: glibc-minimal-langpack riscv64 2.41-5.0.riscv64.fc42 build 0.0 B DEBUG util.py:461: gmp riscv64 1:6.3.0-4.fc42 build 573.5 KiB DEBUG util.py:461: gnutls riscv64 3.8.8-3.fc42 build 3.1 MiB DEBUG util.py:461: grep riscv64 3.11-10.fc42 build 1.0 MiB DEBUG util.py:461: json-c riscv64 0.18-2.fc42 build 78.3 KiB DEBUG util.py:461: keyutils-libs riscv64 1.6.3-5.fc42 build 50.0 KiB DEBUG util.py:461: krb5-libs riscv64 1.21.3-6.fc42 build 2.3 MiB DEBUG util.py:461: libacl riscv64 2.3.2-3.fc42 build 35.7 KiB DEBUG util.py:461: libarchive riscv64 3.7.7-4.fc42 build 826.2 KiB DEBUG util.py:461: libattr riscv64 2.5.2-5.fc42 build 20.1 KiB DEBUG util.py:461: libblkid riscv64 2.40.4-7.fc42 build 418.8 KiB DEBUG util.py:461: libbrotli riscv64 1.1.0-6.fc42 build 856.9 KiB DEBUG util.py:461: libcap riscv64 2.73-2.fc42 build 196.9 KiB DEBUG util.py:461: libcap-ng riscv64 0.8.5-4.fc42 build 56.3 KiB DEBUG util.py:461: libcom_err riscv64 1.47.2-3.fc42 build 58.8 KiB DEBUG util.py:461: libcurl riscv64 8.11.1-4.fc42 build 793.3 KiB DEBUG util.py:461: libdnf5 riscv64 5.2.13.1-1.fc42 build 4.1 MiB DEBUG util.py:461: libdnf5-cli riscv64 5.2.13.1-1.fc42 build 835.1 KiB DEBUG util.py:461: libeconf riscv64 0.7.6-1.fc42 build 60.8 KiB DEBUG util.py:461: libevent riscv64 2.1.12-15.fc42 build 829.5 KiB DEBUG util.py:461: libffi riscv64 3.4.6-5.0.riscv64.fc42 build 57.9 KiB DEBUG util.py:461: libgcc riscv64 15.1.1-2.fc42 build 210.2 KiB DEBUG util.py:461: libgomp riscv64 15.1.1-2.fc42 build 454.3 KiB DEBUG util.py:461: libidn2 riscv64 2.3.8-1.fc42 build 585.2 KiB DEBUG util.py:461: libmodulemd riscv64 2.15.1-1.fc42 build 607.5 KiB DEBUG util.py:461: libmount riscv64 2.40.4-7.fc42 build 480.1 KiB DEBUG util.py:461: libnghttp2 riscv64 1.64.0-3.fc42 build 187.9 KiB DEBUG util.py:461: libpsl riscv64 0.21.5-5.fc42 build 72.2 KiB DEBUG util.py:461: librepo riscv64 1.19.0-3.fc42 build 211.8 KiB DEBUG util.py:461: libselinux riscv64 3.8-2.fc42 build 188.8 KiB DEBUG util.py:461: libsemanage riscv64 3.8.1-2.fc42 build 301.0 KiB DEBUG util.py:461: libsepol riscv64 3.8-1.fc42 build 766.5 KiB DEBUG util.py:461: libsmartcols riscv64 2.40.4-7.fc42 build 325.4 KiB DEBUG util.py:461: libsolv riscv64 0.7.32-4.fc42 build 850.2 KiB DEBUG util.py:461: libssh riscv64 0.11.1-4.fc42 build 539.8 KiB DEBUG util.py:461: libssh-config noarch 0.11.1-4.fc42 build 277.0 B DEBUG util.py:461: libstdc++ riscv64 15.1.1-2.fc42 build 2.4 MiB DEBUG util.py:461: libtasn1 riscv64 4.20.0-1.fc42 build 172.4 KiB DEBUG util.py:461: libtool-ltdl riscv64 2.5.4-4.0.riscv64.fc42 build 61.6 KiB DEBUG util.py:461: libunistring riscv64 1.1-9.fc42 build 1.7 MiB DEBUG util.py:461: libuuid riscv64 2.40.4-7.fc42 build 37.2 KiB DEBUG util.py:461: libverto riscv64 0.3.2-10.fc42 build 29.1 KiB DEBUG util.py:461: libxcrypt riscv64 4.4.38-7.fc42 build 312.3 KiB DEBUG util.py:461: libxml2 riscv64 2.12.10-1.fc42 build 1.6 MiB DEBUG util.py:461: libyaml riscv64 0.2.5-16.fc42 build 114.2 KiB DEBUG util.py:461: libzstd riscv64 1.5.7-1.fc42 build 889.8 KiB DEBUG util.py:461: lua-libs riscv64 5.4.8-1.fc42 build 261.2 KiB DEBUG util.py:461: lz4-libs riscv64 1.10.0-2.fc42 build 193.5 KiB DEBUG util.py:461: ncurses-base noarch 6.5-5.20250125.fc42 build 326.8 KiB DEBUG util.py:461: ncurses-libs riscv64 6.5-5.20250125.fc42 build 915.4 KiB DEBUG util.py:461: nettle riscv64 3.10.1-1.fc42 build 744.2 KiB DEBUG util.py:461: openldap riscv64 2.6.9-3.fc42 build 588.3 KiB DEBUG util.py:461: openssl-libs riscv64 1:3.2.4-3.fc42 build 5.9 MiB DEBUG util.py:461: p11-kit riscv64 0.25.5-5.fc42 build 2.3 MiB DEBUG util.py:461: p11-kit-trust riscv64 0.25.5-5.fc42 build 485.5 KiB DEBUG util.py:461: pam-libs riscv64 1.7.0-6.fc42 build 114.1 KiB DEBUG util.py:461: pcre2 riscv64 10.45-1.fc42 build 604.8 KiB DEBUG util.py:461: pcre2-syntax noarch 10.45-1.fc42 build 273.9 KiB DEBUG util.py:461: popt riscv64 1.19-8.fc42 build 124.5 KiB DEBUG util.py:461: publicsuffix-list-dafsa noarch 20250116-1.fc42 build 68.5 KiB DEBUG util.py:461: rpm riscv64 4.20.1-1.fc42 build 3.1 MiB DEBUG util.py:461: rpm-build-libs riscv64 4.20.1-1.fc42 build 182.9 KiB DEBUG util.py:461: rpm-libs riscv64 4.20.1-1.fc42 build 727.5 KiB DEBUG util.py:461: rpm-sequoia riscv64 1.7.0-5.fc42 build 2.2 MiB DEBUG util.py:461: sdbus-cpp riscv64 1.5.0-4.fc42 build 291.1 KiB DEBUG util.py:461: sed riscv64 4.9-4.fc42 build 858.0 KiB DEBUG util.py:461: setup noarch 2.15.0-13.fc42 build 720.9 KiB DEBUG util.py:461: shadow-utils riscv64 2:4.17.4-1.fc42 build 4.4 MiB DEBUG util.py:461: sqlite-libs riscv64 3.47.2-2.fc42 build 1.3 MiB DEBUG util.py:461: systemd-libs riscv64 257.6-1.fc42 build 2.5 MiB DEBUG util.py:461: systemd-standalone-sysusers riscv64 257.6-1.fc42 build 344.0 KiB DEBUG util.py:461: xz-libs riscv64 1:5.8.1-2.fc42 build 185.5 KiB DEBUG util.py:461: zchunk-libs riscv64 1.5.1-2.fc42 build 93.1 KiB DEBUG util.py:461: zlib-ng-compat riscv64 2.2.4-3.fc42 build 105.1 KiB DEBUG util.py:461: Transaction Summary: DEBUG util.py:461: Installing: 102 packages DEBUG util.py:459: Total size of inbound packages is 37 MiB. Need to download 37 MiB. DEBUG util.py:459: After this operation, 114 MiB extra will be used (install 114 MiB, remove 0 B). DEBUG util.py:459: [ 1/102] dnf5-plugins-0:5.2.13.1-1.fc4 100% | 1.2 MiB/s | 454.8 KiB | 00m00s DEBUG util.py:459: [ 2/102] dnf5-0:5.2.13.1-1.fc42.riscv6 100% | 2.3 MiB/s | 926.5 KiB | 00m00s DEBUG util.py:459: [ 3/102] fmt-0:11.1.4-1.fc42.riscv64 100% | 1.1 MiB/s | 100.9 KiB | 00m00s DEBUG util.py:459: [ 4/102] bash-0:5.2.37-1.fc42.riscv64 100% | 3.4 MiB/s | 1.7 MiB | 00m01s DEBUG util.py:459: [ 5/102] glibc-0:2.41-5.0.riscv64.fc42 100% | 8.1 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [ 6/102] libdnf5-0:5.2.13.1-1.fc42.ris 100% | 6.1 MiB/s | 1.5 MiB | 00m00s DEBUG util.py:459: [ 7/102] libdnf5-cli-0:5.2.13.1-1.fc42 100% | 1.7 MiB/s | 367.3 KiB | 00m00s DEBUG util.py:459: [ 8/102] libgcc-0:15.1.1-2.fc42.riscv6 100% | 793.7 KiB/s | 116.7 KiB | 00m00s DEBUG util.py:459: [ 9/102] libstdc++-0:15.1.1-2.fc42.ris 100% | 6.8 MiB/s | 889.2 KiB | 00m00s DEBUG util.py:459: [ 10/102] rpm-libs-0:4.20.1-1.fc42.risc 100% | 2.6 MiB/s | 329.2 KiB | 00m00s DEBUG util.py:459: [ 11/102] sdbus-cpp-0:1.5.0-4.fc42.risc 100% | 1.0 MiB/s | 109.5 KiB | 00m00s DEBUG util.py:459: [ 12/102] json-c-0:0.18-2.fc42.riscv64 100% | 894.4 KiB/s | 45.6 KiB | 00m00s DEBUG util.py:459: [ 13/102] systemd-libs-0:257.6-1.fc42.r 100% | 6.4 MiB/s | 867.3 KiB | 00m00s DEBUG util.py:459: [ 14/102] rpm-build-libs-0:4.20.1-1.fc4 100% | 914.3 KiB/s | 100.6 KiB | 00m00s DEBUG util.py:459: [ 15/102] zlib-ng-compat-0:2.2.4-3.fc42 100% | 643.0 KiB/s | 69.4 KiB | 00m00s DEBUG util.py:459: [ 16/102] filesystem-0:3.18-37.0.riscv6 100% | 8.4 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [ 17/102] ncurses-libs-0:6.5-5.20250125 100% | 2.1 MiB/s | 353.4 KiB | 00m00s DEBUG util.py:459: [ 18/102] basesystem-0:11-22.fc42.noarc 100% | 53.6 KiB/s | 7.3 KiB | 00m00s DEBUG util.py:459: [ 19/102] glibc-common-0:2.41-5.0.riscv 100% | 3.0 MiB/s | 294.5 KiB | 00m00s DEBUG util.py:459: [ 20/102] glib2-0:2.84.2-1.fc42.riscv64 100% | 11.2 MiB/s | 3.2 MiB | 00m00s DEBUG util.py:459: [ 21/102] libmodulemd-0:2.15.1-1.fc42.r 100% | 748.6 KiB/s | 227.6 KiB | 00m00s DEBUG util.py:459: [ 22/102] librepo-0:1.19.0-3.fc42.riscv 100% | 364.0 KiB/s | 98.6 KiB | 00m00s DEBUG util.py:459: [ 23/102] libsolv-0:0.7.32-4.fc42.riscv 100% | 4.1 MiB/s | 461.0 KiB | 00m00s DEBUG util.py:459: [ 24/102] libxml2-0:2.12.10-1.fc42.risc 100% | 5.2 MiB/s | 727.5 KiB | 00m00s DEBUG util.py:459: [ 25/102] sqlite-libs-0:3.47.2-2.fc42.r 100% | 4.6 MiB/s | 780.8 KiB | 00m00s DEBUG util.py:459: [ 26/102] libsmartcols-0:2.40.4-7.fc42. 100% | 1.3 MiB/s | 166.2 KiB | 00m00s DEBUG util.py:459: [ 27/102] bzip2-libs-0:1.0.8-20.fc42.ri 100% | 513.5 KiB/s | 44.7 KiB | 00m00s DEBUG util.py:459: [ 28/102] libacl-0:2.3.2-3.fc42.riscv64 100% | 493.2 KiB/s | 26.1 KiB | 00m00s DEBUG util.py:459: [ 29/102] libcap-0:2.73-2.fc42.riscv64 100% | 946.1 KiB/s | 87.0 KiB | 00m00s DEBUG util.py:459: [ 30/102] libzstd-0:1.5.7-1.fc42.riscv6 100% | 3.5 MiB/s | 403.4 KiB | 00m00s DEBUG util.py:459: [ 31/102] lua-libs-0:5.4.8-1.fc42.riscv 100% | 1.3 MiB/s | 136.1 KiB | 00m00s DEBUG util.py:459: [ 32/102] popt-0:1.19-8.fc42.riscv64 100% | 918.1 KiB/s | 59.7 KiB | 00m00s DEBUG util.py:459: [ 33/102] rpm-0:4.20.1-1.fc42.riscv64 100% | 4.3 MiB/s | 521.3 KiB | 00m00s DEBUG util.py:459: [ 34/102] rpm-sequoia-0:1.7.0-5.fc42.ri 100% | 5.9 MiB/s | 906.1 KiB | 00m00s DEBUG util.py:459: [ 35/102] xz-libs-1:5.8.1-2.fc42.riscv6 100% | 763.3 KiB/s | 114.5 KiB | 00m00s DEBUG util.py:459: [ 36/102] libblkid-0:2.40.4-7.fc42.risc 100% | 1.9 MiB/s | 208.4 KiB | 00m00s DEBUG util.py:459: [ 37/102] libmount-0:2.40.4-7.fc42.risc 100% | 2.2 MiB/s | 234.5 KiB | 00m00s DEBUG util.py:459: [ 38/102] libselinux-0:3.8-2.fc42.riscv 100% | 1.0 MiB/s | 103.3 KiB | 00m00s DEBUG util.py:459: [ 39/102] libxcrypt-0:4.4.38-7.fc42.ris 100% | 1.3 MiB/s | 150.6 KiB | 00m00s DEBUG util.py:459: [ 40/102] openssl-libs-1:3.2.4-3.fc42.r 100% | 10.5 MiB/s | 2.1 MiB | 00m00s DEBUG util.py:459: [ 41/102] elfutils-libelf-0:0.193-2.fc4 100% | 1.0 MiB/s | 215.0 KiB | 00m00s DEBUG util.py:459: [ 42/102] elfutils-libs-0:0.193-2.fc42. 100% | 1.4 MiB/s | 307.2 KiB | 00m00s DEBUG util.py:459: [ 43/102] file-libs-0:5.46-3.fc42.riscv 100% | 5.5 MiB/s | 862.5 KiB | 00m00s DEBUG util.py:459: [ 44/102] libgomp-0:15.1.1-2.fc42.riscv 100% | 2.2 MiB/s | 355.4 KiB | 00m00s DEBUG util.py:459: [ 45/102] ncurses-base-0:6.5-5.20250125 100% | 1.4 MiB/s | 63.4 KiB | 00m00s DEBUG util.py:459: [ 46/102] setup-0:2.15.0-13.fc42.noarch 100% | 1.0 MiB/s | 149.5 KiB | 00m00s DEBUG util.py:459: [ 47/102] libffi-0:3.4.6-5.0.riscv64.fc 100% | 754.8 KiB/s | 36.2 KiB | 00m00s DEBUG util.py:459: [ 48/102] gnutls-0:3.8.8-3.fc42.riscv64 100% | 6.9 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [ 49/102] pcre2-0:10.45-1.fc42.riscv64 100% | 1.8 MiB/s | 273.1 KiB | 00m00s DEBUG util.py:459: [ 50/102] libyaml-0:0.2.5-16.fc42.riscv 100% | 456.6 KiB/s | 64.8 KiB | 00m00s DEBUG util.py:459: [ 51/102] zchunk-libs-0:1.5.1-2.fc42.ri 100% | 895.5 KiB/s | 53.7 KiB | 00m00s DEBUG util.py:459: [ 52/102] libattr-0:2.5.2-5.fc42.riscv6 100% | 235.4 KiB/s | 18.1 KiB | 00m00s DEBUG util.py:459: [ 53/102] pam-libs-0:1.7.0-6.fc42.riscv 100% | 953.7 KiB/s | 59.1 KiB | 00m00s DEBUG util.py:459: [ 54/102] curl-0:8.11.1-4.fc42.riscv64 100% | 2.3 MiB/s | 228.2 KiB | 00m00s DEBUG util.py:459: [ 55/102] libuuid-0:2.40.4-7.fc42.riscv 100% | 497.8 KiB/s | 27.4 KiB | 00m00s DEBUG util.py:459: [ 56/102] libarchive-0:3.7.7-4.fc42.ris 100% | 3.6 MiB/s | 431.3 KiB | 00m00s DEBUG util.py:459: [ 57/102] libsepol-0:3.8-1.fc42.riscv64 100% | 2.7 MiB/s | 363.8 KiB | 00m00s DEBUG util.py:459: [ 58/102] ca-certificates-0:2024.2.69_v 100% | 5.4 MiB/s | 944.7 KiB | 00m00s DEBUG util.py:459: [ 59/102] elfutils-default-yama-scope-0 100% | 186.6 KiB/s | 12.5 KiB | 00m00s DEBUG util.py:459: [ 60/102] crypto-policies-0:20250214-1. 100% | 486.8 KiB/s | 74.0 KiB | 00m00s DEBUG util.py:459: [ 61/102] gmp-1:6.3.0-4.fc42.riscv64 100% | 2.9 MiB/s | 293.1 KiB | 00m00s DEBUG util.py:459: [ 62/102] libidn2-0:2.3.8-1.fc42.riscv6 100% | 1.8 MiB/s | 183.2 KiB | 00m00s DEBUG util.py:459: [ 63/102] libtasn1-0:4.20.0-1.fc42.risc 100% | 772.6 KiB/s | 76.5 KiB | 00m00s DEBUG util.py:459: [ 64/102] libunistring-0:1.1-9.fc42.ris 100% | 4.8 MiB/s | 556.8 KiB | 00m00s DEBUG util.py:459: [ 65/102] nettle-0:3.10.1-1.fc42.riscv6 100% | 3.4 MiB/s | 447.5 KiB | 00m00s DEBUG util.py:459: [ 66/102] p11-kit-0:0.25.5-5.fc42.riscv 100% | 3.2 MiB/s | 499.0 KiB | 00m00s DEBUG util.py:459: [ 67/102] p11-kit-trust-0:0.25.5-5.fc42 100% | 1.3 MiB/s | 142.9 KiB | 00m00s DEBUG util.py:459: [ 68/102] pcre2-syntax-0:10.45-1.fc42.n 100% | 1.6 MiB/s | 161.6 KiB | 00m00s DEBUG util.py:459: [ 69/102] audit-libs-0:4.0.3-2.fc42.ris 100% | 1.4 MiB/s | 132.3 KiB | 00m00s DEBUG util.py:459: [ 70/102] libeconf-0:0.7.6-1.fc42.riscv 100% | 643.9 KiB/s | 37.3 KiB | 00m00s DEBUG util.py:459: [ 71/102] lz4-libs-0:1.10.0-2.fc42.risc 100% | 1.2 MiB/s | 112.2 KiB | 00m00s DEBUG util.py:459: [ 72/102] findutils-1:4.10.0-5.fc42.ris 100% | 4.3 MiB/s | 561.5 KiB | 00m00s DEBUG util.py:459: [ 73/102] grep-0:3.11-10.fc42.riscv64 100% | 2.1 MiB/s | 297.5 KiB | 00m00s DEBUG util.py:459: [ 74/102] alternatives-0:1.33-1.fc42.ri 100% | 739.5 KiB/s | 40.7 KiB | 00m00s DEBUG util.py:459: [ 75/102] sed-0:4.9-4.fc42.riscv64 100% | 2.1 MiB/s | 315.2 KiB | 00m00s DEBUG util.py:459: [ 76/102] libcap-ng-0:0.8.5-4.fc42.risc 100% | 487.5 KiB/s | 32.2 KiB | 00m00s DEBUG util.py:459: [ 77/102] fedora-release-0:42-26.noarch 100% | 310.9 KiB/s | 14.6 KiB | 00m00s DEBUG util.py:459: [ 78/102] fedora-release-common-0:42-26 100% | 500.8 KiB/s | 25.5 KiB | 00m00s DEBUG util.py:459: [ 79/102] fedora-repos-0:42-1.1.riscv64 100% | 208.9 KiB/s | 10.7 KiB | 00m00s DEBUG util.py:459: [ 80/102] fedora-gpg-keys-0:42-1.1.risc 100% | 1.3 MiB/s | 125.7 KiB | 00m00s DEBUG util.py:459: [ 81/102] systemd-standalone-sysusers-0 100% | 1.7 MiB/s | 200.4 KiB | 00m00s DEBUG util.py:459: [ 82/102] coreutils-single-0:9.6-4.fc42 100% | 4.8 MiB/s | 703.1 KiB | 00m00s DEBUG util.py:459: [ 83/102] libcurl-0:8.11.1-4.fc42.riscv 100% | 3.2 MiB/s | 405.4 KiB | 00m00s DEBUG util.py:459: [ 84/102] krb5-libs-0:1.21.3-6.fc42.ris 100% | 5.9 MiB/s | 824.1 KiB | 00m00s DEBUG util.py:459: [ 85/102] libbrotli-0:1.1.0-6.fc42.risc 100% | 2.9 MiB/s | 388.5 KiB | 00m00s DEBUG util.py:459: [ 86/102] libnghttp2-0:1.64.0-3.fc42.ri 100% | 775.2 KiB/s | 89.9 KiB | 00m00s DEBUG util.py:459: [ 87/102] libpsl-0:0.21.5-5.fc42.riscv6 100% | 607.8 KiB/s | 65.0 KiB | 00m00s DEBUG util.py:459: [ 88/102] libssh-0:0.11.1-4.fc42.riscv6 100% | 2.3 MiB/s | 249.7 KiB | 00m00s DEBUG util.py:459: [ 89/102] openldap-0:2.6.9-3.fc42.riscv 100% | 2.5 MiB/s | 268.6 KiB | 00m00s DEBUG util.py:459: [ 90/102] keyutils-libs-0:1.6.3-5.fc42. 100% | 489.2 KiB/s | 31.3 KiB | 00m00s DEBUG util.py:459: [ 91/102] libcom_err-0:1.47.2-3.fc42.ri 100% | 445.2 KiB/s | 26.7 KiB | 00m00s DEBUG util.py:459: [ 92/102] libverto-0:0.3.2-10.fc42.risc 100% | 432.3 KiB/s | 21.2 KiB | 00m00s DEBUG util.py:459: [ 93/102] publicsuffix-list-dafsa-0:202 100% | 997.2 KiB/s | 58.8 KiB | 00m00s DEBUG util.py:459: [ 94/102] libssh-config-0:0.11.1-4.fc42 100% | 193.7 KiB/s | 8.9 KiB | 00m00s DEBUG util.py:459: [ 95/102] libtool-ltdl-0:2.5.4-4.0.risc 100% | 689.8 KiB/s | 35.9 KiB | 00m00s DEBUG util.py:459: [ 96/102] cyrus-sasl-lib-0:2.1.28-30.fc 100% | 6.4 MiB/s | 852.2 KiB | 00m00s DEBUG util.py:459: [ 97/102] libevent-0:2.1.12-15.fc42.ris 100% | 1.8 MiB/s | 264.2 KiB | 00m00s DEBUG util.py:459: [ 98/102] shadow-utils-2:4.17.4-1.fc42. 100% | 7.7 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [ 99/102] gdbm-libs-1:1.23-9.fc42.riscv 100% | 429.4 KiB/s | 58.0 KiB | 00m00s DEBUG util.py:459: [100/102] libsemanage-0:3.8.1-2.fc42.ri 100% | 901.8 KiB/s | 130.8 KiB | 00m00s DEBUG util.py:459: [101/102] glibc-minimal-langpack-0:2.41 100% | 135.4 KiB/s | 7.0 KiB | 00m00s DEBUG util.py:459: [102/102] fedora-release-identity-basic 100% | 308.3 KiB/s | 15.4 KiB | 00m00s DEBUG util.py:459: -------------------------------------------------------------------------------- DEBUG util.py:459: [102/102] Total 100% | 8.4 MiB/s | 37.3 MiB | 00m04s DEBUG util.py:459: Running transaction DEBUG util.py:459: [ 1/104] Verify package files 100% | 79.0 B/s | 102.0 B | 00m01s DEBUG util.py:459: [ 2/104] Prepare transaction 100% | 637.0 B/s | 102.0 B | 00m00s DEBUG util.py:459: [ 3/104] Installing libgcc-0:15.1.1-2. 100% | 6.7 MiB/s | 211.9 KiB | 00m00s DEBUG util.py:459: [ 4/104] Installing fedora-release-ide 100% | 70.0 KiB/s | 932.0 B | 00m00s DEBUG util.py:459: [ 5/104] Installing fedora-gpg-keys-0: 100% | 2.1 MiB/s | 174.8 KiB | 00m00s DEBUG util.py:459: [ 6/104] Installing fedora-repos-0:42- 100% | 630.7 KiB/s | 8.2 KiB | 00m00s DEBUG util.py:459: [ 7/104] Installing fedora-release-com 100% | 1.3 MiB/s | 24.5 KiB | 00m00s DEBUG util.py:459: [ 8/104] Installing fedora-release-0:4 100% | 471.0 B/s | 124.0 B | 00m00s DEBUG util.py:459: >>> Running sysusers scriptlet: setup-0:2.15.0-13.fc42.noarch DEBUG util.py:459: >>> Finished sysusers scriptlet: setup-0:2.15.0-13.fc42.noarch DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating group 'adm' with GID 4. DEBUG util.py:459: >>> Creating group 'audio' with GID 63. DEBUG util.py:459: >>> Creating group 'bin' with GID 1. DEBUG util.py:459: >>> Creating group 'cdrom' with GID 11. DEBUG util.py:459: >>> Creating group 'clock' with GID 103. DEBUG util.py:459: >>> Creating group 'daemon' with GID 2. DEBUG util.py:459: >>> Creating group 'dialout' with GID 18. DEBUG util.py:459: >>> Creating group 'disk' with GID 6. DEBUG util.py:459: >>> Creating group 'floppy' with GID 19. DEBUG util.py:459: >>> Creating group 'ftp' with GID 50. DEBUG util.py:459: >>> Creating group 'games' with GID 20. DEBUG util.py:459: >>> Creating group 'input' with GID 104. DEBUG util.py:459: >>> Creating group 'kmem' with GID 9. DEBUG util.py:459: >>> Creating group 'kvm' with GID 36. DEBUG util.py:459: >>> Creating group 'lock' with GID 54. DEBUG util.py:459: >>> Creating group 'lp' with GID 7. DEBUG util.py:459: >>> Creating group 'mail' with GID 12. DEBUG util.py:459: >>> Creating group 'man' with GID 15. DEBUG util.py:459: >>> Creating group 'mem' with GID 8. DEBUG util.py:459: >>> Creating group 'nobody' with GID 65534. DEBUG util.py:459: >>> Creating group 'render' with GID 105. DEBUG util.py:459: >>> Creating group 'root' with GID 0. DEBUG util.py:459: >>> Creating group 'sgx' with GID 106. DEBUG util.py:459: >>> Creating group 'sys' with GID 3. DEBUG util.py:459: >>> Creating group 'tape' with GID 33. DEBUG util.py:459: >>> Creating group 'tty' with GID 5. DEBUG util.py:459: >>> Creating group 'users' with GID 100. DEBUG util.py:459: >>> Creating group 'utmp' with GID 22. DEBUG util.py:459: >>> Creating group 'video' with GID 39. DEBUG util.py:459: >>> Creating group 'wheel' with GID 10. DEBUG util.py:459: >>> DEBUG util.py:459: >>> Running sysusers scriptlet: setup-0:2.15.0-13.fc42.noarch DEBUG util.py:459: >>> Finished sysusers scriptlet: setup-0:2.15.0-13.fc42.noarch DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating user 'adm' (adm) with UID 3 and GID 4. DEBUG util.py:459: >>> Creating user 'bin' (bin) with UID 1 and GID 1. DEBUG util.py:459: >>> Creating user 'daemon' (daemon) with UID 2 and GID 2. DEBUG util.py:459: >>> Creating user 'ftp' (FTP User) with UID 14 and GID 50. DEBUG util.py:459: >>> Creating user 'games' (games) with UID 12 and GID 20. DEBUG util.py:459: >>> Creating user 'halt' (halt) with UID 7 and GID 0. DEBUG util.py:459: >>> Creating user 'lp' (lp) with UID 4 and GID 7. DEBUG util.py:459: >>> Creating user 'mail' (mail) with UID 8 and GID 12. DEBUG util.py:459: >>> Creating user 'nobody' (Kernel Overflow User) with UID 65534 and GID 65534. DEBUG util.py:459: >>> Creating user 'operator' (operator) with UID 11 and GID 0. DEBUG util.py:459: >>> Creating user 'root' (Super User) with UID 0 and GID 0. DEBUG util.py:459: >>> Creating user 'shutdown' (shutdown) with UID 6 and GID 0. DEBUG util.py:459: >>> Creating user 'sync' (sync) with UID 5 and GID 0. DEBUG util.py:459: >>> DEBUG util.py:459: [ 9/104] Installing setup-0:2.15.0-13. 100% | 7.1 MiB/s | 726.7 KiB | 00m00s DEBUG util.py:459: [ 10/104] Installing filesystem-0:3.18- 100% | 389.7 KiB/s | 211.6 KiB | 00m01s DEBUG util.py:459: [ 11/104] Installing basesystem-0:11-22 100% | 11.0 KiB/s | 124.0 B | 00m00s DEBUG util.py:459: [ 12/104] Installing libssh-config-0:0. 100% | 61.3 KiB/s | 816.0 B | 00m00s DEBUG util.py:459: [ 13/104] Installing publicsuffix-list- 100% | 4.2 MiB/s | 69.2 KiB | 00m00s DEBUG util.py:459: [ 14/104] Installing pcre2-syntax-0:10. 100% | 10.8 MiB/s | 276.4 KiB | 00m00s DEBUG util.py:459: [ 15/104] Installing ncurses-base-0:6.5 100% | 5.7 MiB/s | 352.2 KiB | 00m00s DEBUG util.py:459: [ 16/104] Installing ncurses-libs-0:6.5 100% | 17.0 MiB/s | 921.8 KiB | 00m00s DEBUG util.py:459: [ 17/104] Installing glibc-0:2.41-5.0.r 100% | 16.9 MiB/s | 4.6 MiB | 00m00s DEBUG util.py:459: [ 18/104] Installing bash-0:5.2.37-1.fc 100% | 24.1 MiB/s | 8.0 MiB | 00m00s DEBUG util.py:459: [ 19/104] Installing glibc-common-0:2.4 100% | 9.4 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [ 20/104] Installing glibc-minimal-lang 100% | 11.0 KiB/s | 124.0 B | 00m00s DEBUG util.py:459: [ 21/104] Installing zlib-ng-compat-0:2 100% | 5.7 MiB/s | 105.9 KiB | 00m00s DEBUG util.py:459: [ 22/104] Installing libstdc++-0:15.1.1 100% | 24.4 MiB/s | 2.4 MiB | 00m00s DEBUG util.py:459: [ 23/104] Installing libzstd-0:1.5.7-1. 100% | 19.3 MiB/s | 891.0 KiB | 00m00s DEBUG util.py:459: [ 24/104] Installing bzip2-libs-0:1.0.8 100% | 4.2 MiB/s | 69.4 KiB | 00m00s DEBUG util.py:459: [ 25/104] Installing xz-libs-1:5.8.1-2. 100% | 8.7 MiB/s | 186.6 KiB | 00m00s DEBUG util.py:459: [ 26/104] Installing libxml2-0:2.12.10- 100% | 12.7 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [ 27/104] Installing fmt-0:11.1.4-1.fc4 100% | 8.2 MiB/s | 244.6 KiB | 00m00s DEBUG util.py:459: [ 28/104] Installing libxcrypt-0:4.4.38 100% | 4.5 MiB/s | 315.0 KiB | 00m00s DEBUG util.py:459: [ 29/104] Installing crypto-policies-0: 100% | 603.5 KiB/s | 163.5 KiB | 00m00s DEBUG util.py:459: [ 30/104] Installing json-c-0:0.18-2.fc 100% | 3.5 MiB/s | 79.5 KiB | 00m00s DEBUG util.py:459: [ 31/104] Installing popt-0:1.19-8.fc42 100% | 3.6 MiB/s | 131.1 KiB | 00m00s DEBUG util.py:459: [ 32/104] Installing libffi-0:3.4.6-5.0 100% | 3.6 MiB/s | 59.3 KiB | 00m00s DEBUG util.py:459: [ 33/104] Installing pcre2-0:10.45-1.fc 100% | 15.2 MiB/s | 606.2 KiB | 00m00s DEBUG util.py:459: [ 34/104] Installing libattr-0:2.5.2-5. 100% | 1.5 MiB/s | 21.1 KiB | 00m00s DEBUG util.py:459: [ 35/104] Installing libacl-0:2.3.2-3.f 100% | 2.4 MiB/s | 36.6 KiB | 00m00s DEBUG util.py:459: [ 36/104] Installing libtasn1-0:4.20.0- 100% | 6.1 MiB/s | 174.2 KiB | 00m00s DEBUG util.py:459: [ 37/104] Installing p11-kit-0:0.25.5-5 100% | 13.8 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [ 38/104] Installing libunistring-0:1.1 100% | 23.0 MiB/s | 1.7 MiB | 00m00s DEBUG util.py:459: [ 39/104] Installing libidn2-0:2.3.8-1. 100% | 11.5 MiB/s | 591.3 KiB | 00m00s DEBUG util.py:459: [ 40/104] Installing elfutils-libelf-0: 100% | 21.3 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [ 41/104] Installing sqlite-libs-0:3.47 100% | 19.7 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [ 42/104] Installing lua-libs-0:5.4.8-1 100% | 9.2 MiB/s | 262.4 KiB | 00m00s DEBUG util.py:459: [ 43/104] Installing libuuid-0:2.40.4-7 100% | 1.9 MiB/s | 38.3 KiB | 00m00s DEBUG util.py:459: [ 44/104] Installing libblkid-0:2.40.4- 100% | 12.1 MiB/s | 419.9 KiB | 00m00s DEBUG util.py:459: [ 45/104] Installing libsepol-0:3.8-1.f 100% | 16.3 MiB/s | 767.5 KiB | 00m00s DEBUG util.py:459: [ 46/104] Installing libselinux-0:3.8-2 100% | 8.4 MiB/s | 190.1 KiB | 00m00s DEBUG util.py:459: [ 47/104] Installing libmount-0:2.40.4- 100% | 14.2 MiB/s | 481.1 KiB | 00m00s DEBUG util.py:459: [ 48/104] Installing gmp-1:6.3.0-4.fc42 100% | 15.6 MiB/s | 575.8 KiB | 00m00s DEBUG util.py:459: [ 49/104] Installing libeconf-0:0.7.6-1 100% | 3.6 MiB/s | 62.4 KiB | 00m00s DEBUG util.py:459: [ 50/104] Installing nettle-0:3.10.1-1. 100% | 17.4 MiB/s | 747.3 KiB | 00m00s DEBUG util.py:459: [ 51/104] Installing findutils-1:4.10.0 100% | 13.8 MiB/s | 1.9 MiB | 00m00s DEBUG util.py:459: [ 52/104] Installing sed-0:4.9-4.fc42.r 100% | 8.1 MiB/s | 866.2 KiB | 00m00s DEBUG util.py:459: [ 53/104] Installing libpsl-0:0.21.5-5. 100% | 4.0 MiB/s | 73.3 KiB | 00m00s DEBUG util.py:459: [ 54/104] Installing grep-0:3.11-10.fc4 100% | 8.8 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [ 55/104] Installing file-libs-0:5.46-3 100% | 40.9 MiB/s | 11.9 MiB | 00m00s DEBUG util.py:459: [ 56/104] Installing elfutils-default-y 100% | 65.9 KiB/s | 2.0 KiB | 00m00s DEBUG util.py:459: [ 57/104] Installing elfutils-libs-0:0. 100% | 17.4 MiB/s | 750.0 KiB | 00m00s DEBUG util.py:459: [ 58/104] Installing libsmartcols-0:2.4 100% | 12.3 MiB/s | 326.6 KiB | 00m00s DEBUG util.py:459: [ 59/104] Installing libgomp-0:15.1.1-2 100% | 15.9 MiB/s | 455.6 KiB | 00m00s DEBUG util.py:459: [ 60/104] Installing libyaml-0:0.2.5-16 100% | 6.3 MiB/s | 115.5 KiB | 00m00s DEBUG util.py:459: [ 61/104] Installing lz4-libs-0:1.10.0- 100% | 9.1 MiB/s | 194.6 KiB | 00m00s DEBUG util.py:459: [ 62/104] Installing alternatives-0:1.3 100% | 930.1 KiB/s | 59.5 KiB | 00m00s DEBUG util.py:459: [ 63/104] Installing p11-kit-trust-0:0. 100% | 4.7 MiB/s | 487.2 KiB | 00m00s DEBUG util.py:459: [ 64/104] Installing gnutls-0:3.8.8-3.f 100% | 23.2 MiB/s | 3.1 MiB | 00m00s DEBUG util.py:459: [ 65/104] Installing glib2-0:2.84.2-1.f 100% | 25.1 MiB/s | 14.8 MiB | 00m01s DEBUG util.py:459: [ 66/104] Installing libcap-ng-0:0.8.5- 100% | 3.3 MiB/s | 58.2 KiB | 00m00s DEBUG util.py:459: [ 67/104] Installing audit-libs-0:4.0.3 100% | 11.1 MiB/s | 329.2 KiB | 00m00s DEBUG util.py:459: [ 68/104] Installing pam-libs-0:1.7.0-6 100% | 5.4 MiB/s | 116.4 KiB | 00m00s DEBUG util.py:459: [ 69/104] Installing libcap-0:2.73-2.fc 100% | 2.7 MiB/s | 201.9 KiB | 00m00s DEBUG util.py:459: [ 70/104] Installing openssl-libs-1:3.2 100% | 26.2 MiB/s | 5.9 MiB | 00m00s DEBUG util.py:459: [ 71/104] Installing systemd-libs-0:257 100% | 24.1 MiB/s | 2.5 MiB | 00m00s DEBUG util.py:459: [ 72/104] Installing coreutils-single-0 100% | 8.7 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [ 73/104] Installing ca-certificates-0: 100% | 315.5 KiB/s | 2.4 MiB | 00m08s DEBUG util.py:459: [ 74/104] Installing sdbus-cpp-0:1.5.0- 100% | 10.6 MiB/s | 292.8 KiB | 00m00s DEBUG util.py:459: [ 75/104] Installing zchunk-libs-0:1.5. 100% | 5.1 MiB/s | 94.5 KiB | 00m00s DEBUG util.py:459: [ 76/104] Installing rpm-sequoia-0:1.7. 100% | 23.8 MiB/s | 2.2 MiB | 00m00s DEBUG util.py:459: [ 77/104] Installing libarchive-0:3.7.7 100% | 17.2 MiB/s | 828.2 KiB | 00m00s DEBUG util.py:459: [ 78/104] Installing systemd-standalone 100% | 4.5 MiB/s | 344.5 KiB | 00m00s DEBUG util.py:459: [ 79/104] Installing rpm-libs-0:4.20.1- 100% | 17.0 MiB/s | 729.1 KiB | 00m00s DEBUG util.py:459: [ 80/104] Installing rpm-build-libs-0:4 100% | 9.0 MiB/s | 183.8 KiB | 00m00s DEBUG util.py:459: [ 81/104] Installing libmodulemd-0:2.15 100% | 6.8 MiB/s | 609.9 KiB | 00m00s DEBUG util.py:459: [ 82/104] Installing libsolv-0:0.7.32-4 100% | 17.3 MiB/s | 852.0 KiB | 00m00s DEBUG util.py:459: [ 83/104] Installing libevent-0:2.1.12- 100% | 17.7 MiB/s | 833.2 KiB | 00m00s DEBUG util.py:459: [ 84/104] Installing libsemanage-0:3.8. 100% | 9.9 MiB/s | 302.8 KiB | 00m00s DEBUG util.py:459: [ 85/104] Installing shadow-utils-2:4.1 100% | 14.4 MiB/s | 4.4 MiB | 00m00s DEBUG util.py:459: [ 86/104] Installing libbrotli-0:1.1.0- 100% | 16.8 MiB/s | 859.2 KiB | 00m00s DEBUG util.py:459: [ 87/104] Installing libnghttp2-0:1.64. 100% | 8.8 MiB/s | 189.0 KiB | 00m00s DEBUG util.py:459: [ 88/104] Installing keyutils-libs-0:1. 100% | 3.0 MiB/s | 51.4 KiB | 00m00s DEBUG util.py:459: [ 89/104] Installing libcom_err-0:1.47. 100% | 3.7 MiB/s | 59.9 KiB | 00m00s DEBUG util.py:459: [ 90/104] Installing libverto-0:0.3.2-1 100% | 1.9 MiB/s | 31.0 KiB | 00m00s DEBUG util.py:459: [ 91/104] Installing krb5-libs-0:1.21.3 100% | 21.0 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [ 92/104] Installing libssh-0:0.11.1-4. 100% | 14.7 MiB/s | 541.9 KiB | 00m00s DEBUG util.py:459: [ 93/104] Installing libtool-ltdl-0:2.5 100% | 3.8 MiB/s | 62.8 KiB | 00m00s DEBUG util.py:459: [ 94/104] Installing gdbm-libs-1:1.23-9 100% | 6.1 MiB/s | 119.0 KiB | 00m00s DEBUG util.py:459: [ 95/104] Installing cyrus-sasl-lib-0:2 100% | 14.7 MiB/s | 2.1 MiB | 00m00s DEBUG util.py:459: [ 96/104] Installing openldap-0:2.6.9-3 100% | 13.4 MiB/s | 592.1 KiB | 00m00s DEBUG util.py:459: [ 97/104] Installing libcurl-0:8.11.1-4 100% | 17.6 MiB/s | 794.4 KiB | 00m00s DEBUG util.py:459: [ 98/104] Installing librepo-0:1.19.0-3 100% | 8.7 MiB/s | 213.1 KiB | 00m00s DEBUG util.py:459: [ 99/104] Installing libdnf5-0:5.2.13.1 100% | 23.9 MiB/s | 4.1 MiB | 00m00s DEBUG util.py:459: >>> [RPM] /etc/dnf/dnf.conf created as /etc/dnf/dnf.conf.rpmnew DEBUG util.py:459: [100/104] Installing libdnf5-cli-0:5.2. 100% | 15.2 MiB/s | 839.2 KiB | 00m00s DEBUG util.py:459: [101/104] Installing dnf5-0:5.2.13.1-1. 100% | 11.6 MiB/s | 2.4 MiB | 00m00s DEBUG util.py:459: [102/104] Installing curl-0:8.11.1-4.fc 100% | 4.1 MiB/s | 473.7 KiB | 00m00s DEBUG util.py:459: [103/104] Installing rpm-0:4.20.1-1.fc4 100% | 11.4 MiB/s | 2.5 MiB | 00m00s DEBUG util.py:459: [104/104] Installing dnf5-plugins-0:5.2 100% | 109.9 KiB/s | 1.2 MiB | 00m11s DEBUG util.py:459: Warning: skipped OpenPGP checks for 102 packages from repository: build DEBUG util.py:459: Complete! DEBUG util.py:608: Child return code was: 0 DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30-bootstrap/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys/fs/selinux'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc/filesystems'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/pts'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/shm'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/os-release DEBUG buildroot.py:38: method _setup_build_dirs skipped in bootstrap DEBUG buildroot.py:38: method _make_users skipped in bootstrap DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/.initialized DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/result INFO buildroot.py:318: calling preinit hooks DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/usr/bin/lscpu'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: Architecture: riscv64 DEBUG util.py:461: Byte Order: Little Endian DEBUG util.py:461: CPU(s): 4 DEBUG util.py:461: On-line CPU(s) list: 0-3 DEBUG util.py:461: Vendor ID: 0x489 DEBUG util.py:461: Model name: eswin,eic770x DEBUG util.py:461: CPU family: 0x8000000000000008 DEBUG util.py:461: Model: 0x6220425 DEBUG util.py:461: Thread(s) per core: 1 DEBUG util.py:461: Core(s) per socket: 4 DEBUG util.py:461: Socket(s): 1 DEBUG util.py:461: CPU(s) scaling MHz: 100% DEBUG util.py:461: CPU max MHz: 1800.0000 DEBUG util.py:461: CPU min MHz: 24.0000 DEBUG util.py:461: L1d cache: 128 KiB (4 instances) DEBUG util.py:461: L1i cache: 128 KiB (4 instances) DEBUG util.py:461: L2 cache: 1 MiB (4 instances) DEBUG util.py:461: L3 cache: 4 MiB (1 instance) DEBUG util.py:461: NUMA node(s): 1 DEBUG util.py:461: NUMA node0 CPU(s): 0-3 DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/free'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: total used free shared buff/cache available DEBUG util.py:461: Mem: 32871676 934588 19249808 2228 13064944 31937088 DEBUG util.py:461: Swap: 41943032 0 41943032 DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/df', '-H', '-T', '/var/lib/mock/f42-spacemit-83-30/root', '/var/cache/mock'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: Filesystem Type Size Used Avail Use% Mounted on DEBUG util.py:461: /dev/sda3 btrfs 989G 17G 961G 2% /var DEBUG util.py:461: /dev/sda3 btrfs 989G 17G 961G 2% /var DEBUG util.py:608: Child return code was: 0 DEBUG buildroot.py:723: create skeleton dirs DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/rpm DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/var/lib/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/yum DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/var/lib/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/dbus DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/var/lib/dbus DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/log DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/var/log DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/cache/dnf DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/var/cache/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/cache/yum DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/var/cache/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/rpm DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/tmp DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/tmp/ccache DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/tmp/ccache DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/tmp DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/var/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf/vars DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf/vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/yum.repos.d DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/yum.repos.d DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/yum DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/proc DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/proc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/sys DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/pts DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/dev/pts DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/shm DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/dev/shm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/mapper DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/dev/mapper DEBUG buildroot.py:867: kernel version == 6.6.96-200.eswin.fc42.riscv64 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/fstab DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/yum/yum.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf/dnf.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/var/log/yum.log DEBUG buildroot.py:332: rootdir = /var/lib/mock/f42-spacemit-83-30/root DEBUG buildroot.py:333: resultdir = /var/lib/mock/f42-spacemit-83-30/result INFO buildroot.py:181: Package manager dnf5 detected and used (direct choice) DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/mock DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/mock DEBUG package_manager.py:404: copying CA trust dir into chroot: /etc/pki/ca-trust => /etc/pki/ca-trust DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust with files from /etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/./extracted DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/./extracted DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/./source DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/./source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/edk2 DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/edk2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/java DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/java DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/openssl DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/openssl DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/pem DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/pem DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/pem/directory-hash DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/pem/directory-hash DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/source/anchors DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/source/anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/source/blocklist DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/source/blocklist DEBUG package_manager.py:404: copying CA trust dir into chroot: /usr/share/pki/ca-trust-source => /usr/share/pki/ca-trust-source DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source with files from /usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source/./anchors DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source/./anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source/./blocklist DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source/./blocklist DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf DEBUG package_manager.py:691: configure DNF vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/proc DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'rprivate,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/proc DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/proc', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,nodev,noexec,nosuid,readonly,rprivate,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'rprivate,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/sys', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,nodev,noexec,nosuid,readonly,rprivate,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/shm DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30/root/dev/shm'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/pts DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'devpts', '-o', 'gid=5,mode=0620,ptmxmode=0666,newinstance', 'devpts', '/var/lib/mock/f42-spacemit-83-30/root/dev/pts'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'bind', '/tmp/mock-selinux-plugin.acwm3e9x', '/var/lib/mock/f42-spacemit-83-30/root/proc/filesystems'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys/fs/selinux DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30/root/sys/fs/selinux'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'private,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/var/lib/mock/f42-spacemit-83-30/root', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,private,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/installation-homedir DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/installation-homedir DEBUG package_manager.py:295: ['/usr/bin/dnf5', '--installroot', '/var/lib/mock/f42-spacemit-83-30/root/', 'install', '@build', '--setopt=deltarpm=False', '--setopt=allow_vendor_change=yes', '--allowerasing'] DEBUG util.py:634: child environment: None DEBUG util.py:551: Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.tjirsrke:/etc/resolv.conf'] DEBUG util.py:556: Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '9f0ed9457c8744e3b35e273ff31290a8', '-D', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root', '-a', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.tjirsrke:/etc/resolv.conf', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/var/lib/mock/f42-spacemit-83-30/root/installation-homedir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--setenv=LC_MESSAGES=C.UTF-8', '--resolv-conf=off', '/usr/bin/dnf5', '--installroot', '/var/lib/mock/f42-spacemit-83-30/root/', 'install', '@build', '--setopt=deltarpm=False', '--setopt=allow_vendor_change=yes', '--allowerasing', '--setopt=tsflags=nocontexts'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/var/lib/mock/f42-spacemit-83-30/root/installation-homedir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'LC_MESSAGES': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False DEBUG util.py:459: Updating and loading repositories: DEBUG util.py:459: build 100% | 10.7 MiB/s | 14.1 MiB | 00m01s DEBUG util.py:459: Repositories loaded. DEBUG util.py:461: Package Arch Version Repository Size DEBUG util.py:461: Installing group/module packages: DEBUG util.py:461: bash riscv64 5.2.37-1.fc42 build 8.0 MiB DEBUG util.py:461: bzip2 riscv64 1.0.8-20.fc42 build 86.8 KiB DEBUG util.py:461: coreutils riscv64 9.6-4.fc42 build 6.0 MiB DEBUG util.py:461: cpio riscv64 2.15-4.fc42 build 1.1 MiB DEBUG util.py:461: diffutils riscv64 3.12-1.fc42 build 1.6 MiB DEBUG util.py:461: fedora-release noarch 42-26 build 0.0 B DEBUG util.py:461: findutils riscv64 1:4.10.0-5.fc42 build 1.9 MiB DEBUG util.py:461: gawk riscv64 5.3.1-1.fc42 build 1.6 MiB DEBUG util.py:461: glibc-minimal-langpack riscv64 2.41-5.0.riscv64.fc42 build 0.0 B DEBUG util.py:461: grep riscv64 3.11-10.fc42 build 1.0 MiB DEBUG util.py:461: gzip riscv64 1.13-3.fc42 build 384.9 KiB DEBUG util.py:461: info riscv64 7.2-3.fc42 build 358.6 KiB DEBUG util.py:461: patch riscv64 2.8-1.fc42 build 227.7 KiB DEBUG util.py:461: redhat-rpm-config noarch 342-4.fc42 build 185.5 KiB DEBUG util.py:461: rpm-build riscv64 4.20.1-1.fc42 build 175.0 KiB DEBUG util.py:461: sed riscv64 4.9-4.fc42 build 858.0 KiB DEBUG util.py:461: shadow-utils riscv64 2:4.17.4-1.fc42 build 4.4 MiB DEBUG util.py:461: tar riscv64 2:1.35-5.fc42 build 3.0 MiB DEBUG util.py:461: unzip riscv64 6.0-66.fc42 build 358.5 KiB DEBUG util.py:461: util-linux riscv64 2.40.4-7.fc42 build 5.6 MiB DEBUG util.py:461: which riscv64 2.23-2.fc42 build 83.4 KiB DEBUG util.py:461: xz riscv64 1:5.8.1-2.fc42 build 1.3 MiB DEBUG util.py:461: Installing dependencies: DEBUG util.py:461: add-determinism riscv64 0.6.0-1.fc42 build 2.2 MiB DEBUG util.py:461: alternatives riscv64 1.33-1.fc42 build 58.0 KiB DEBUG util.py:461: ansible-srpm-macros noarch 1-17.1.fc42 build 35.7 KiB DEBUG util.py:461: audit-libs riscv64 4.0.3-2.fc42 build 327.1 KiB DEBUG util.py:461: basesystem noarch 11-22.fc42 build 0.0 B DEBUG util.py:461: binutils riscv64 2.44-3.fc42 build 24.3 MiB DEBUG util.py:461: build-reproducibility-srpm-macros noarch 0.6.0-1.fc42 build 735.0 B DEBUG util.py:461: bzip2-libs riscv64 1.0.8-20.fc42 build 68.3 KiB DEBUG util.py:461: ca-certificates noarch 2024.2.69_v8.0.401-6.fc42 build 2.6 MiB DEBUG util.py:461: coreutils-common riscv64 9.6-4.fc42 build 11.1 MiB DEBUG util.py:461: crypto-policies noarch 20250214-1.gitff7551b.fc42 build 137.2 KiB DEBUG util.py:461: curl riscv64 8.11.1-4.fc42 build 471.2 KiB DEBUG util.py:461: cyrus-sasl-lib riscv64 2.1.28-30.fc42 build 2.1 MiB DEBUG util.py:461: debugedit riscv64 5.1-6.fc42 build 196.4 KiB DEBUG util.py:461: dwz riscv64 0.16-1.fc42 build 290.5 KiB DEBUG util.py:461: ed riscv64 1.21-2.fc42 build 138.9 KiB DEBUG util.py:461: efi-srpm-macros noarch 6-3.0.riscv64.fc42 build 40.1 KiB DEBUG util.py:461: elfutils riscv64 0.193-2.fc42 build 2.9 MiB DEBUG util.py:461: elfutils-debuginfod-client riscv64 0.193-2.fc42 build 71.4 KiB DEBUG util.py:461: elfutils-default-yama-scope noarch 0.193-2.fc42 build 1.8 KiB DEBUG util.py:461: elfutils-libelf riscv64 0.193-2.fc42 build 1.2 MiB DEBUG util.py:461: elfutils-libs riscv64 0.193-2.fc42 build 748.1 KiB DEBUG util.py:461: fedora-gpg-keys noarch 42-1.1.riscv64_spacemit_0 build 128.2 KiB DEBUG util.py:461: fedora-release-common noarch 42-26 build 20.2 KiB DEBUG util.py:461: fedora-release-identity-basic noarch 42-26 build 674.0 B DEBUG util.py:461: fedora-repos noarch 42-1.1.riscv64_spacemit_0 build 6.8 KiB DEBUG util.py:461: file riscv64 5.46-3.fc42 build 100.0 KiB DEBUG util.py:461: file-libs riscv64 5.46-3.fc42 build 11.9 MiB DEBUG util.py:461: filesystem riscv64 3.18-37.0.riscv64.fc42 build 113.0 B DEBUG util.py:461: filesystem-srpm-macros noarch 3.18-37.0.riscv64.fc42 build 38.2 KiB DEBUG util.py:461: fonts-srpm-macros noarch 1:2.0.5-22.fc42 build 55.8 KiB DEBUG util.py:461: forge-srpm-macros noarch 0.4.0-2.fc42 build 38.9 KiB DEBUG util.py:461: fpc-srpm-macros noarch 1.3-14.fc42 build 144.0 B DEBUG util.py:461: gdb-minimal riscv64 16.3-1.fc42 build 13.9 MiB DEBUG util.py:461: gdbm-libs riscv64 1:1.23-9.fc42 build 117.3 KiB DEBUG util.py:461: ghc-srpm-macros noarch 1.9.2-2.fc42 build 779.0 B DEBUG util.py:461: glibc riscv64 2.41-5.0.riscv64.fc42 build 4.6 MiB DEBUG util.py:461: glibc-common riscv64 2.41-5.0.riscv64.fc42 build 999.0 KiB DEBUG util.py:461: glibc-gconv-extra riscv64 2.41-5.0.riscv64.fc42 build 6.0 MiB DEBUG util.py:461: gmp riscv64 1:6.3.0-4.fc42 build 573.5 KiB DEBUG util.py:461: gnat-srpm-macros noarch 6-7.0.riscv64.fc42 build 1.0 KiB DEBUG util.py:461: go-srpm-macros noarch 3.6.0-6.fc42 build 60.8 KiB DEBUG util.py:461: jansson riscv64 2.14-2.fc42 build 81.0 KiB DEBUG util.py:461: json-c riscv64 0.18-2.fc42 build 78.3 KiB DEBUG util.py:461: kernel-srpm-macros noarch 1.0-25.fc42 build 1.9 KiB DEBUG util.py:461: keyutils-libs riscv64 1.6.3-5.fc42 build 50.0 KiB DEBUG util.py:461: krb5-libs riscv64 1.21.3-6.fc42 build 2.3 MiB DEBUG util.py:461: libacl riscv64 2.3.2-3.fc42 build 35.7 KiB DEBUG util.py:461: libarchive riscv64 3.7.7-4.fc42 build 826.2 KiB DEBUG util.py:461: libattr riscv64 2.5.2-5.fc42 build 20.1 KiB DEBUG util.py:461: libblkid riscv64 2.40.4-7.fc42 build 418.8 KiB DEBUG util.py:461: libbrotli riscv64 1.1.0-6.fc42 build 856.9 KiB DEBUG util.py:461: libcap riscv64 2.73-2.fc42 build 196.9 KiB DEBUG util.py:461: libcap-ng riscv64 0.8.5-4.fc42 build 56.3 KiB DEBUG util.py:461: libcom_err riscv64 1.47.2-3.fc42 build 58.8 KiB DEBUG util.py:461: libcurl riscv64 8.11.1-4.fc42 build 793.3 KiB DEBUG util.py:461: libeconf riscv64 0.7.6-1.fc42 build 60.8 KiB DEBUG util.py:461: libevent riscv64 2.1.12-15.fc42 build 829.5 KiB DEBUG util.py:461: libfdisk riscv64 2.40.4-7.fc42 build 531.0 KiB DEBUG util.py:461: libffi riscv64 3.4.6-5.0.riscv64.fc42 build 57.9 KiB DEBUG util.py:461: libgcc riscv64 15.1.1-2.fc42 build 210.2 KiB DEBUG util.py:461: libgomp riscv64 15.1.1-2.fc42 build 454.3 KiB DEBUG util.py:461: libidn2 riscv64 2.3.8-1.fc42 build 585.2 KiB DEBUG util.py:461: libmount riscv64 2.40.4-7.fc42 build 480.1 KiB DEBUG util.py:461: libnghttp2 riscv64 1.64.0-3.fc42 build 187.9 KiB DEBUG util.py:461: libpkgconf riscv64 2.3.0-2.fc42 build 73.6 KiB DEBUG util.py:461: libpsl riscv64 0.21.5-5.fc42 build 72.2 KiB DEBUG util.py:461: libselinux riscv64 3.8-2.fc42 build 188.8 KiB DEBUG util.py:461: libsemanage riscv64 3.8.1-2.fc42 build 301.0 KiB DEBUG util.py:461: libsepol riscv64 3.8-1.fc42 build 766.5 KiB DEBUG util.py:461: libsmartcols riscv64 2.40.4-7.fc42 build 325.4 KiB DEBUG util.py:461: libssh riscv64 0.11.1-4.fc42 build 539.8 KiB DEBUG util.py:461: libssh-config noarch 0.11.1-4.fc42 build 277.0 B DEBUG util.py:461: libstdc++ riscv64 15.1.1-2.fc42 build 2.4 MiB DEBUG util.py:461: libtasn1 riscv64 4.20.0-1.fc42 build 172.4 KiB DEBUG util.py:461: libtool-ltdl riscv64 2.5.4-4.0.riscv64.fc42 build 61.6 KiB DEBUG util.py:461: libunistring riscv64 1.1-9.fc42 build 1.7 MiB DEBUG util.py:461: libuuid riscv64 2.40.4-7.fc42 build 37.2 KiB DEBUG util.py:461: libverto riscv64 0.3.2-10.fc42 build 29.1 KiB DEBUG util.py:461: libxcrypt riscv64 4.4.38-7.fc42 build 312.3 KiB DEBUG util.py:461: libxml2 riscv64 2.12.10-1.fc42 build 1.6 MiB DEBUG util.py:461: libzstd riscv64 1.5.7-1.fc42 build 889.8 KiB DEBUG util.py:461: lua-libs riscv64 5.4.8-1.fc42 build 261.2 KiB DEBUG util.py:461: lua-srpm-macros noarch 1-15.fc42 build 1.3 KiB DEBUG util.py:461: lz4-libs riscv64 1.10.0-2.fc42 build 193.5 KiB DEBUG util.py:461: mpfr riscv64 4.2.2-1.fc42 build 535.5 KiB DEBUG util.py:461: ncurses-base noarch 6.5-5.20250125.fc42 build 326.8 KiB DEBUG util.py:461: ncurses-libs riscv64 6.5-5.20250125.fc42 build 915.4 KiB DEBUG util.py:461: ocaml-srpm-macros noarch 10-4.fc42 build 1.9 KiB DEBUG util.py:461: openblas-srpm-macros noarch 2-19.fc42 build 112.0 B DEBUG util.py:461: openldap riscv64 2.6.9-3.fc42 build 588.3 KiB DEBUG util.py:461: openssl-libs riscv64 1:3.2.4-3.fc42 build 5.9 MiB DEBUG util.py:461: p11-kit riscv64 0.25.5-5.fc42 build 2.3 MiB DEBUG util.py:461: p11-kit-trust riscv64 0.25.5-5.fc42 build 485.5 KiB DEBUG util.py:461: package-notes-srpm-macros noarch 0.5-13.fc42 build 1.6 KiB DEBUG util.py:461: pam-libs riscv64 1.7.0-6.fc42 build 114.1 KiB DEBUG util.py:461: pcre2 riscv64 10.45-1.fc42 build 604.8 KiB DEBUG util.py:461: pcre2-syntax noarch 10.45-1.fc42 build 273.9 KiB DEBUG util.py:461: perl-srpm-macros noarch 1-57.fc42 build 861.0 B DEBUG util.py:461: pkgconf riscv64 2.3.0-2.fc42 build 84.3 KiB DEBUG util.py:461: pkgconf-m4 noarch 2.3.0-2.fc42 build 14.4 KiB DEBUG util.py:461: pkgconf-pkg-config riscv64 2.3.0-2.fc42 build 990.0 B DEBUG util.py:461: popt riscv64 1.19-8.fc42 build 124.5 KiB DEBUG util.py:461: publicsuffix-list-dafsa noarch 20250116-1.fc42 build 68.5 KiB DEBUG util.py:461: pyproject-srpm-macros noarch 1.18.1-1.fc42 build 1.9 KiB DEBUG util.py:461: python-srpm-macros noarch 3.13-4.fc42 build 51.0 KiB DEBUG util.py:461: qt5-srpm-macros noarch 5.15.17-1.fc42 build 500.0 B DEBUG util.py:461: qt6-srpm-macros noarch 6.9.0-2.0.riscv64.fc42 build 472.0 B DEBUG util.py:461: readline riscv64 8.2-13.fc42 build 460.4 KiB DEBUG util.py:461: rpm riscv64 4.20.1-1.fc42 build 3.1 MiB DEBUG util.py:461: rpm-build-libs riscv64 4.20.1-1.fc42 build 182.9 KiB DEBUG util.py:461: rpm-libs riscv64 4.20.1-1.fc42 build 727.5 KiB DEBUG util.py:461: rpm-sequoia riscv64 1.7.0-5.fc42 build 2.2 MiB DEBUG util.py:461: rust-srpm-macros noarch 26.3-4.fc42 build 4.8 KiB DEBUG util.py:461: setup noarch 2.15.0-13.fc42 build 720.9 KiB DEBUG util.py:461: sqlite-libs riscv64 3.47.2-2.fc42 build 1.3 MiB DEBUG util.py:461: systemd-libs riscv64 257.6-1.fc42 build 2.5 MiB DEBUG util.py:461: systemd-standalone-sysusers riscv64 257.6-1.fc42 build 344.0 KiB DEBUG util.py:461: tree-sitter-srpm-macros noarch 0.1.0-8.fc42 build 6.5 KiB DEBUG util.py:461: util-linux-core riscv64 2.40.4-7.fc42 build 2.3 MiB DEBUG util.py:461: xxhash-libs riscv64 0.8.3-2.fc42 build 85.7 KiB DEBUG util.py:461: xz-libs riscv64 1:5.8.1-2.fc42 build 185.5 KiB DEBUG util.py:461: zig-srpm-macros noarch 1-4.fc42 build 1.1 KiB DEBUG util.py:461: zip riscv64 3.0-43.fc42 build 792.9 KiB DEBUG util.py:461: zlib-ng-compat riscv64 2.2.4-3.fc42 build 105.1 KiB DEBUG util.py:461: zstd riscv64 1.5.7-1.fc42 build 2.0 MiB DEBUG util.py:461: Installing groups: DEBUG util.py:461: build DEBUG util.py:461: Transaction Summary: DEBUG util.py:461: Installing: 148 packages DEBUG util.py:459: Total size of inbound packages is 52 MiB. Need to download 52 MiB. DEBUG util.py:459: After this operation, 173 MiB extra will be used (install 173 MiB, remove 0 B). DEBUG util.py:459: [ 1/148] bzip2-0:1.0.8-20.fc42.riscv64 100% | 235.3 KiB/s | 53.2 KiB | 00m00s DEBUG util.py:459: [ 2/148] bash-0:5.2.37-1.fc42.riscv64 100% | 3.1 MiB/s | 1.7 MiB | 00m01s DEBUG util.py:459: [ 3/148] cpio-0:2.15-4.fc42.riscv64 100% | 848.9 KiB/s | 295.4 KiB | 00m00s DEBUG util.py:459: [ 4/148] coreutils-0:9.6-4.fc42.riscv6 100% | 2.0 MiB/s | 1.3 MiB | 00m01s DEBUG util.py:459: [ 5/148] fedora-release-0:42-26.noarch 100% | 265.7 KiB/s | 14.6 KiB | 00m00s DEBUG util.py:459: [ 6/148] diffutils-0:3.12-1.fc42.riscv 100% | 2.8 MiB/s | 397.7 KiB | 00m00s DEBUG util.py:459: [ 7/148] findutils-1:4.10.0-5.fc42.ris 100% | 4.0 MiB/s | 561.5 KiB | 00m00s DEBUG util.py:459: [ 8/148] glibc-minimal-langpack-0:2.41 100% | 102.0 KiB/s | 7.0 KiB | 00m00s DEBUG util.py:459: [ 9/148] gawk-0:5.3.1-1.fc42.riscv64 100% | 5.3 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [ 10/148] grep-0:3.11-10.fc42.riscv64 100% | 2.4 MiB/s | 297.5 KiB | 00m00s DEBUG util.py:459: [ 11/148] gzip-0:1.13-3.fc42.riscv64 100% | 1.2 MiB/s | 167.2 KiB | 00m00s DEBUG util.py:459: [ 12/148] info-0:7.2-3.fc42.riscv64 100% | 1.4 MiB/s | 190.1 KiB | 00m00s DEBUG util.py:459: [ 13/148] patch-0:2.8-1.fc42.riscv64 100% | 1.1 MiB/s | 121.0 KiB | 00m00s DEBUG util.py:459: [ 14/148] redhat-rpm-config-0:342-4.fc4 100% | 720.8 KiB/s | 74.2 KiB | 00m00s DEBUG util.py:459: [ 15/148] rpm-build-0:4.20.1-1.fc42.ris 100% | 672.9 KiB/s | 75.4 KiB | 00m00s DEBUG util.py:459: [ 16/148] sed-0:4.9-4.fc42.riscv64 100% | 2.5 MiB/s | 315.2 KiB | 00m00s DEBUG util.py:459: [ 17/148] shadow-utils-2:4.17.4-1.fc42. 100% | 7.3 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [ 18/148] tar-2:1.35-5.fc42.riscv64 100% | 5.0 MiB/s | 878.2 KiB | 00m00s DEBUG util.py:459: [ 19/148] unzip-0:6.0-66.fc42.riscv64 100% | 1.1 MiB/s | 181.9 KiB | 00m00s DEBUG util.py:459: [ 20/148] which-0:2.23-2.fc42.riscv64 100% | 600.4 KiB/s | 42.0 KiB | 00m00s DEBUG util.py:459: [ 21/148] util-linux-0:2.40.4-7.fc42.ri 100% | 6.3 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [ 22/148] xz-1:5.8.1-2.fc42.riscv64 100% | 3.0 MiB/s | 559.0 KiB | 00m00s DEBUG util.py:459: [ 23/148] filesystem-0:3.18-37.0.riscv6 100% | 5.8 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [ 24/148] glibc-0:2.41-5.0.riscv64.fc42 100% | 7.4 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [ 25/148] ncurses-libs-0:6.5-5.20250125 100% | 1.5 MiB/s | 353.4 KiB | 00m00s DEBUG util.py:459: [ 26/148] bzip2-libs-0:1.0.8-20.fc42.ri 100% | 328.5 KiB/s | 44.7 KiB | 00m00s DEBUG util.py:459: [ 27/148] libacl-0:2.3.2-3.fc42.riscv64 100% | 353.3 KiB/s | 26.1 KiB | 00m00s DEBUG util.py:459: [ 28/148] coreutils-common-0:9.6-4.fc42 100% | 9.6 MiB/s | 2.1 MiB | 00m00s DEBUG util.py:459: [ 29/148] gmp-1:6.3.0-4.fc42.riscv64 100% | 1.4 MiB/s | 293.1 KiB | 00m00s DEBUG util.py:459: [ 30/148] libattr-0:2.5.2-5.fc42.riscv6 100% | 134.3 KiB/s | 18.1 KiB | 00m00s DEBUG util.py:459: [ 31/148] libcap-0:2.73-2.fc42.riscv64 100% | 750.3 KiB/s | 87.0 KiB | 00m00s DEBUG util.py:459: [ 32/148] libselinux-0:3.8-2.fc42.riscv 100% | 947.5 KiB/s | 103.3 KiB | 00m00s DEBUG util.py:459: [ 33/148] openssl-libs-1:3.2.4-3.fc42.r 100% | 9.7 MiB/s | 2.1 MiB | 00m00s DEBUG util.py:459: [ 34/148] fedora-release-common-0:42-26 100% | 193.5 KiB/s | 25.5 KiB | 00m00s DEBUG util.py:459: [ 35/148] systemd-libs-0:257.6-1.fc42.r 100% | 4.3 MiB/s | 867.3 KiB | 00m00s DEBUG util.py:459: [ 36/148] mpfr-0:4.2.2-1.fc42.riscv64 100% | 2.1 MiB/s | 281.7 KiB | 00m00s DEBUG util.py:459: [ 37/148] readline-0:8.2-13.fc42.riscv6 100% | 1.5 MiB/s | 217.5 KiB | 00m00s DEBUG util.py:459: [ 38/148] glibc-common-0:2.41-5.0.riscv 100% | 1.3 MiB/s | 294.5 KiB | 00m00s DEBUG util.py:459: [ 39/148] pcre2-0:10.45-1.fc42.riscv64 100% | 1.5 MiB/s | 273.1 KiB | 00m00s DEBUG util.py:459: [ 40/148] ed-0:1.21-2.fc42.riscv64 100% | 453.2 KiB/s | 83.8 KiB | 00m00s DEBUG util.py:459: [ 41/148] ansible-srpm-macros-0:1-17.1. 100% | 286.1 KiB/s | 20.3 KiB | 00m00s DEBUG util.py:459: [ 42/148] build-reproducibility-srpm-ma 100% | 196.3 KiB/s | 11.6 KiB | 00m00s DEBUG util.py:459: [ 43/148] efi-srpm-macros-0:6-3.0.riscv 100% | 402.9 KiB/s | 22.6 KiB | 00m00s DEBUG util.py:459: [ 44/148] file-0:5.46-3.fc42.riscv64 100% | 771.4 KiB/s | 48.6 KiB | 00m00s DEBUG util.py:459: [ 45/148] dwz-0:0.16-1.fc42.riscv64 100% | 1.3 MiB/s | 149.4 KiB | 00m00s DEBUG util.py:459: [ 46/148] filesystem-srpm-macros-0:3.18 100% | 348.2 KiB/s | 25.4 KiB | 00m00s DEBUG util.py:459: [ 47/148] fonts-srpm-macros-1:2.0.5-22. 100% | 358.0 KiB/s | 27.2 KiB | 00m00s DEBUG util.py:459: [ 48/148] forge-srpm-macros-0:0.4.0-2.f 100% | 196.5 KiB/s | 19.9 KiB | 00m00s DEBUG util.py:459: [ 49/148] fpc-srpm-macros-0:1.3-14.fc42 100% | 113.0 KiB/s | 8.0 KiB | 00m00s DEBUG util.py:459: [ 50/148] ghc-srpm-macros-0:1.9.2-2.fc4 100% | 143.1 KiB/s | 9.2 KiB | 00m00s DEBUG util.py:459: [ 51/148] gnat-srpm-macros-0:6-7.0.risc 100% | 181.1 KiB/s | 8.7 KiB | 00m00s DEBUG util.py:459: [ 52/148] go-srpm-macros-0:3.6.0-6.fc42 100% | 424.2 KiB/s | 27.6 KiB | 00m00s DEBUG util.py:459: [ 53/148] kernel-srpm-macros-0:1.0-25.f 100% | 126.6 KiB/s | 9.9 KiB | 00m00s DEBUG util.py:459: [ 54/148] lua-srpm-macros-0:1-15.fc42.n 100% | 54.4 KiB/s | 8.9 KiB | 00m00s DEBUG util.py:459: [ 55/148] ocaml-srpm-macros-0:10-4.fc42 100% | 68.2 KiB/s | 9.2 KiB | 00m00s DEBUG util.py:459: [ 56/148] openblas-srpm-macros-0:2-19.f 100% | 54.3 KiB/s | 7.8 KiB | 00m00s DEBUG util.py:459: [ 57/148] package-notes-srpm-macros-0:0 100% | 156.9 KiB/s | 9.3 KiB | 00m00s DEBUG util.py:459: [ 58/148] perl-srpm-macros-0:1-57.fc42. 100% | 166.8 KiB/s | 8.5 KiB | 00m00s DEBUG util.py:459: [ 59/148] pyproject-srpm-macros-0:1.18. 100% | 234.8 KiB/s | 13.9 KiB | 00m00s DEBUG util.py:459: [ 60/148] python-srpm-macros-0:3.13-4.f 100% | 396.1 KiB/s | 23.0 KiB | 00m00s DEBUG util.py:459: [ 61/148] qt5-srpm-macros-0:5.15.17-1.f 100% | 146.3 KiB/s | 8.6 KiB | 00m00s DEBUG util.py:459: [ 62/148] qt6-srpm-macros-0:6.9.0-2.0.r 100% | 133.9 KiB/s | 9.4 KiB | 00m00s DEBUG util.py:459: [ 63/148] rust-srpm-macros-0:26.3-4.fc4 100% | 225.1 KiB/s | 11.7 KiB | 00m00s DEBUG util.py:459: [ 64/148] tree-sitter-srpm-macros-0:0.1 100% | 220.2 KiB/s | 11.2 KiB | 00m00s DEBUG util.py:459: [ 65/148] rpm-0:4.20.1-1.fc42.riscv64 100% | 3.9 MiB/s | 521.3 KiB | 00m00s DEBUG util.py:459: [ 66/148] zig-srpm-macros-0:1-4.fc42.no 100% | 135.1 KiB/s | 8.2 KiB | 00m00s DEBUG util.py:459: [ 67/148] zip-0:3.0-43.fc42.riscv64 100% | 2.3 MiB/s | 276.6 KiB | 00m00s DEBUG util.py:459: [ 68/148] debugedit-0:5.1-6.fc42.riscv6 100% | 425.3 KiB/s | 88.0 KiB | 00m00s DEBUG util.py:459: [ 69/148] binutils-0:2.44-3.fc42.riscv6 100% | 13.6 MiB/s | 4.9 MiB | 00m00s DEBUG util.py:459: [ 70/148] elfutils-0:0.193-2.fc42.riscv 100% | 1.7 MiB/s | 582.3 KiB | 00m00s DEBUG util.py:459: [ 71/148] elfutils-libelf-0:0.193-2.fc4 100% | 1.0 MiB/s | 215.0 KiB | 00m00s DEBUG util.py:459: [ 72/148] pkgconf-pkg-config-0:2.3.0-2. 100% | 140.0 KiB/s | 9.8 KiB | 00m00s DEBUG util.py:459: [ 73/148] libarchive-0:3.7.7-4.fc42.ris 100% | 3.3 MiB/s | 431.3 KiB | 00m00s DEBUG util.py:459: [ 74/148] popt-0:1.19-8.fc42.riscv64 100% | 817.5 KiB/s | 59.7 KiB | 00m00s DEBUG util.py:459: [ 75/148] rpm-build-libs-0:4.20.1-1.fc4 100% | 1.1 MiB/s | 100.6 KiB | 00m00s DEBUG util.py:459: [ 76/148] rpm-libs-0:4.20.1-1.fc42.risc 100% | 3.0 MiB/s | 329.2 KiB | 00m00s DEBUG util.py:459: [ 77/148] zstd-0:1.5.7-1.fc42.riscv64 100% | 4.1 MiB/s | 600.7 KiB | 00m00s DEBUG util.py:459: [ 78/148] libeconf-0:0.7.6-1.fc42.riscv 100% | 557.4 KiB/s | 37.3 KiB | 00m00s DEBUG util.py:459: [ 79/148] audit-libs-0:4.0.3-2.fc42.ris 100% | 1.1 MiB/s | 132.3 KiB | 00m00s DEBUG util.py:459: [ 80/148] pam-libs-0:1.7.0-6.fc42.riscv 100% | 832.8 KiB/s | 59.1 KiB | 00m00s DEBUG util.py:459: [ 81/148] libsemanage-0:3.8.1-2.fc42.ri 100% | 1.0 MiB/s | 130.8 KiB | 00m00s DEBUG util.py:459: [ 82/148] libxcrypt-0:4.4.38-7.fc42.ris 100% | 1.0 MiB/s | 150.6 KiB | 00m00s DEBUG util.py:459: [ 83/148] setup-0:2.15.0-13.fc42.noarch 100% | 1.2 MiB/s | 149.5 KiB | 00m00s DEBUG util.py:459: [ 84/148] libblkid-0:2.40.4-7.fc42.risc 100% | 1.7 MiB/s | 208.4 KiB | 00m00s DEBUG util.py:459: [ 85/148] libcap-ng-0:0.8.5-4.fc42.risc 100% | 361.5 KiB/s | 32.2 KiB | 00m00s DEBUG util.py:459: [ 86/148] libfdisk-0:2.40.4-7.fc42.risc 100% | 2.3 MiB/s | 253.1 KiB | 00m00s DEBUG util.py:459: [ 87/148] libmount-0:2.40.4-7.fc42.risc 100% | 1.7 MiB/s | 234.5 KiB | 00m00s DEBUG util.py:459: [ 88/148] libsmartcols-0:2.40.4-7.fc42. 100% | 1.1 MiB/s | 166.2 KiB | 00m00s DEBUG util.py:459: [ 89/148] libuuid-0:2.40.4-7.fc42.riscv 100% | 370.0 KiB/s | 27.4 KiB | 00m00s DEBUG util.py:459: [ 90/148] util-linux-core-0:2.40.4-7.fc 100% | 4.6 MiB/s | 661.8 KiB | 00m00s DEBUG util.py:459: [ 91/148] zlib-ng-compat-0:2.2.4-3.fc42 100% | 503.2 KiB/s | 69.4 KiB | 00m00s DEBUG util.py:459: [ 92/148] xz-libs-1:5.8.1-2.fc42.riscv6 100% | 605.8 KiB/s | 114.5 KiB | 00m00s DEBUG util.py:459: [ 93/148] basesystem-0:11-22.fc42.noarc 100% | 102.7 KiB/s | 7.3 KiB | 00m00s DEBUG util.py:459: [ 94/148] glibc-gconv-extra-0:2.41-5.0. 100% | 7.8 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [ 95/148] ncurses-base-0:6.5-5.20250125 100% | 450.0 KiB/s | 63.4 KiB | 00m00s DEBUG util.py:459: [ 96/148] libgcc-0:15.1.1-2.fc42.riscv6 100% | 607.7 KiB/s | 116.7 KiB | 00m00s DEBUG util.py:459: [ 97/148] libsepol-0:3.8-1.fc42.riscv64 100% | 3.1 MiB/s | 363.8 KiB | 00m00s DEBUG util.py:459: [ 98/148] ca-certificates-0:2024.2.69_v 100% | 5.7 MiB/s | 944.7 KiB | 00m00s DEBUG util.py:459: [ 99/148] crypto-policies-0:20250214-1. 100% | 552.2 KiB/s | 74.0 KiB | 00m00s DEBUG util.py:459: [100/148] fedora-repos-0:42-1.1.riscv64 100% | 134.9 KiB/s | 10.7 KiB | 00m00s DEBUG util.py:459: [101/148] pcre2-syntax-0:10.45-1.fc42.n 100% | 1.5 MiB/s | 161.6 KiB | 00m00s DEBUG util.py:459: [102/148] add-determinism-0:0.6.0-1.fc4 100% | 5.5 MiB/s | 893.6 KiB | 00m00s DEBUG util.py:459: [103/148] file-libs-0:5.46-3.fc42.riscv 100% | 4.4 MiB/s | 862.5 KiB | 00m00s DEBUG util.py:459: [104/148] curl-0:8.11.1-4.fc42.riscv64 100% | 1.6 MiB/s | 228.2 KiB | 00m00s DEBUG util.py:459: [105/148] alternatives-0:1.33-1.fc42.ri 100% | 557.2 KiB/s | 40.7 KiB | 00m00s DEBUG util.py:459: [106/148] elfutils-debuginfod-client-0: 100% | 853.1 KiB/s | 46.9 KiB | 00m00s DEBUG util.py:459: [107/148] jansson-0:2.14-2.fc42.riscv64 100% | 853.6 KiB/s | 46.9 KiB | 00m00s DEBUG util.py:459: [108/148] elfutils-libs-0:0.193-2.fc42. 100% | 2.6 MiB/s | 307.2 KiB | 00m00s DEBUG util.py:459: [109/148] libstdc++-0:15.1.1-2.fc42.ris 100% | 5.5 MiB/s | 889.2 KiB | 00m00s DEBUG util.py:459: [110/148] libzstd-0:1.5.7-1.fc42.riscv6 100% | 2.6 MiB/s | 403.4 KiB | 00m00s DEBUG util.py:459: [111/148] libxml2-0:2.12.10-1.fc42.risc 100% | 4.6 MiB/s | 727.5 KiB | 00m00s DEBUG util.py:459: [112/148] pkgconf-0:2.3.0-2.fc42.riscv6 100% | 543.1 KiB/s | 45.6 KiB | 00m00s DEBUG util.py:459: [113/148] lz4-libs-0:1.10.0-2.fc42.risc 100% | 883.2 KiB/s | 112.2 KiB | 00m00s DEBUG util.py:459: [114/148] pkgconf-m4-0:2.3.0-2.fc42.noa 100% | 257.3 KiB/s | 14.2 KiB | 00m00s DEBUG util.py:459: [115/148] lua-libs-0:5.4.8-1.fc42.riscv 100% | 1.3 MiB/s | 136.1 KiB | 00m00s DEBUG util.py:459: [116/148] libgomp-0:15.1.1-2.fc42.riscv 100% | 2.6 MiB/s | 355.4 KiB | 00m00s DEBUG util.py:459: [117/148] rpm-sequoia-0:1.7.0-5.fc42.ri 100% | 4.8 MiB/s | 906.1 KiB | 00m00s DEBUG util.py:459: [118/148] libffi-0:3.4.6-5.0.riscv64.fc 100% | 348.4 KiB/s | 36.2 KiB | 00m00s DEBUG util.py:459: [119/148] sqlite-libs-0:3.47.2-2.fc42.r 100% | 4.4 MiB/s | 780.8 KiB | 00m00s DEBUG util.py:459: [120/148] p11-kit-trust-0:0.25.5-5.fc42 100% | 1.3 MiB/s | 142.9 KiB | 00m00s DEBUG util.py:459: [121/148] p11-kit-0:0.25.5-5.fc42.riscv 100% | 3.4 MiB/s | 499.0 KiB | 00m00s DEBUG util.py:459: [122/148] json-c-0:0.18-2.fc42.riscv64 100% | 1.0 MiB/s | 45.6 KiB | 00m00s DEBUG util.py:459: [123/148] fedora-gpg-keys-0:42-1.1.risc 100% | 966.9 KiB/s | 125.7 KiB | 00m00s DEBUG util.py:459: [124/148] elfutils-default-yama-scope-0 100% | 201.7 KiB/s | 12.5 KiB | 00m00s DEBUG util.py:459: [125/148] libpkgconf-0:2.3.0-2.fc42.ris 100% | 659.4 KiB/s | 38.9 KiB | 00m00s DEBUG util.py:459: [126/148] fedora-release-identity-basic 100% | 296.4 KiB/s | 15.4 KiB | 00m00s DEBUG util.py:459: [127/148] libtasn1-0:4.20.0-1.fc42.risc 100% | 742.6 KiB/s | 76.5 KiB | 00m00s DEBUG util.py:459: [128/148] systemd-standalone-sysusers-0 100% | 1.7 MiB/s | 200.4 KiB | 00m00s DEBUG util.py:459: [129/148] xxhash-libs-0:0.8.3-2.fc42.ri 100% | 863.5 KiB/s | 53.5 KiB | 00m00s DEBUG util.py:459: [130/148] gdb-minimal-0:16.3-1.fc42.ris 100% | 12.4 MiB/s | 4.6 MiB | 00m00s DEBUG util.py:459: [131/148] libcurl-0:8.11.1-4.fc42.riscv 100% | 1.2 MiB/s | 405.4 KiB | 00m00s DEBUG util.py:459: [132/148] krb5-libs-0:1.21.3-6.fc42.ris 100% | 2.1 MiB/s | 824.1 KiB | 00m00s DEBUG util.py:459: [133/148] libbrotli-0:1.1.0-6.fc42.risc 100% | 2.7 MiB/s | 388.5 KiB | 00m00s DEBUG util.py:459: [134/148] libidn2-0:2.3.8-1.fc42.riscv6 100% | 1.3 MiB/s | 183.2 KiB | 00m00s DEBUG util.py:459: [135/148] libnghttp2-0:1.64.0-3.fc42.ri 100% | 856.4 KiB/s | 89.9 KiB | 00m00s DEBUG util.py:459: [136/148] libpsl-0:0.21.5-5.fc42.riscv6 100% | 565.5 KiB/s | 65.0 KiB | 00m00s DEBUG util.py:459: [137/148] libssh-0:0.11.1-4.fc42.riscv6 100% | 2.1 MiB/s | 249.7 KiB | 00m00s DEBUG util.py:459: [138/148] keyutils-libs-0:1.6.3-5.fc42. 100% | 549.3 KiB/s | 31.3 KiB | 00m00s DEBUG util.py:459: [139/148] openldap-0:2.6.9-3.fc42.riscv 100% | 1.9 MiB/s | 268.6 KiB | 00m00s DEBUG util.py:459: [140/148] libcom_err-0:1.47.2-3.fc42.ri 100% | 392.9 KiB/s | 26.7 KiB | 00m00s DEBUG util.py:459: [141/148] libverto-0:0.3.2-10.fc42.risc 100% | 392.3 KiB/s | 21.2 KiB | 00m00s DEBUG util.py:459: [142/148] publicsuffix-list-dafsa-0:202 100% | 878.1 KiB/s | 58.8 KiB | 00m00s DEBUG util.py:459: [143/148] libunistring-0:1.1-9.fc42.ris 100% | 4.6 MiB/s | 556.8 KiB | 00m00s DEBUG util.py:459: [144/148] libssh-config-0:0.11.1-4.fc42 100% | 93.8 KiB/s | 8.9 KiB | 00m00s DEBUG util.py:459: [145/148] libtool-ltdl-0:2.5.4-4.0.risc 100% | 535.3 KiB/s | 35.9 KiB | 00m00s DEBUG util.py:459: [146/148] cyrus-sasl-lib-0:2.1.28-30.fc 100% | 5.1 MiB/s | 852.2 KiB | 00m00s DEBUG util.py:459: [147/148] libevent-0:2.1.12-15.fc42.ris 100% | 1.9 MiB/s | 264.2 KiB | 00m00s DEBUG util.py:459: [148/148] gdbm-libs-1:1.23-9.fc42.riscv 100% | 762.8 KiB/s | 58.0 KiB | 00m00s DEBUG util.py:459: -------------------------------------------------------------------------------- DEBUG util.py:459: [148/148] Total 100% | 7.6 MiB/s | 52.0 MiB | 00m07s DEBUG util.py:459: Running transaction DEBUG util.py:459: [ 1/150] Verify package files 100% | 83.0 B/s | 148.0 B | 00m02s DEBUG util.py:459: [ 2/150] Prepare transaction 100% | 701.0 B/s | 148.0 B | 00m00s DEBUG util.py:459: [ 3/150] Installing libgcc-0:15.1.1-2. 100% | 6.5 MiB/s | 211.9 KiB | 00m00s DEBUG util.py:459: [ 4/150] Installing libssh-config-0:0. 100% | 66.4 KiB/s | 816.0 B | 00m00s DEBUG util.py:459: [ 5/150] Installing publicsuffix-list- 100% | 4.5 MiB/s | 69.2 KiB | 00m00s DEBUG util.py:459: [ 6/150] Installing fedora-release-ide 100% | 70.0 KiB/s | 932.0 B | 00m00s DEBUG util.py:459: [ 7/150] Installing fedora-gpg-keys-0: 100% | 2.5 MiB/s | 174.8 KiB | 00m00s DEBUG util.py:459: [ 8/150] Installing fedora-repos-0:42- 100% | 585.7 KiB/s | 8.2 KiB | 00m00s DEBUG util.py:459: [ 9/150] Installing fedora-release-com 100% | 1.3 MiB/s | 24.5 KiB | 00m00s DEBUG util.py:459: [ 10/150] Installing fedora-release-0:4 100% | 905.0 B/s | 124.0 B | 00m00s DEBUG util.py:459: >>> Running sysusers scriptlet: setup-0:2.15.0-13.fc42.noarch DEBUG util.py:459: >>> Finished sysusers scriptlet: setup-0:2.15.0-13.fc42.noarch DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating group 'adm' with GID 4. DEBUG util.py:459: >>> Creating group 'audio' with GID 63. DEBUG util.py:459: >>> Creating group 'bin' with GID 1. DEBUG util.py:459: >>> Creating group 'cdrom' with GID 11. DEBUG util.py:459: >>> Creating group 'clock' with GID 103. DEBUG util.py:459: >>> Creating group 'daemon' with GID 2. DEBUG util.py:459: >>> Creating group 'dialout' with GID 18. DEBUG util.py:459: >>> Creating group 'disk' with GID 6. DEBUG util.py:459: >>> Creating group 'floppy' with GID 19. DEBUG util.py:459: >>> Creating group 'ftp' with GID 50. DEBUG util.py:459: >>> Creating group 'games' with GID 20. DEBUG util.py:459: >>> Creating group 'input' with GID 104. DEBUG util.py:459: >>> Creating group 'kmem' with GID 9. DEBUG util.py:459: >>> Creating group 'kvm' with GID 36. DEBUG util.py:459: >>> Creating group 'lock' with GID 54. DEBUG util.py:459: >>> Creating group 'lp' with GID 7. DEBUG util.py:459: >>> Creating group 'mail' with GID 12. DEBUG util.py:459: >>> Creating group 'man' with GID 15. DEBUG util.py:459: >>> Creating group 'mem' with GID 8. DEBUG util.py:459: >>> Creating group 'nobody' with GID 65534. DEBUG util.py:459: >>> Creating group 'render' with GID 105. DEBUG util.py:459: >>> Creating group 'root' with GID 0. DEBUG util.py:459: >>> Creating group 'sgx' with GID 106. DEBUG util.py:459: >>> Creating group 'sys' with GID 3. DEBUG util.py:459: >>> Creating group 'tape' with GID 33. DEBUG util.py:459: >>> Creating group 'tty' with GID 5. DEBUG util.py:459: >>> Creating group 'users' with GID 100. DEBUG util.py:459: >>> Creating group 'utmp' with GID 22. DEBUG util.py:459: >>> Creating group 'video' with GID 39. DEBUG util.py:459: >>> Creating group 'wheel' with GID 10. DEBUG util.py:459: >>> DEBUG util.py:459: >>> Running sysusers scriptlet: setup-0:2.15.0-13.fc42.noarch DEBUG util.py:459: >>> Finished sysusers scriptlet: setup-0:2.15.0-13.fc42.noarch DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating user 'adm' (adm) with UID 3 and GID 4. DEBUG util.py:459: >>> Creating user 'bin' (bin) with UID 1 and GID 1. DEBUG util.py:459: >>> Creating user 'daemon' (daemon) with UID 2 and GID 2. DEBUG util.py:459: >>> Creating user 'ftp' (FTP User) with UID 14 and GID 50. DEBUG util.py:459: >>> Creating user 'games' (games) with UID 12 and GID 20. DEBUG util.py:459: >>> Creating user 'halt' (halt) with UID 7 and GID 0. DEBUG util.py:459: >>> Creating user 'lp' (lp) with UID 4 and GID 7. DEBUG util.py:459: >>> Creating user 'mail' (mail) with UID 8 and GID 12. DEBUG util.py:459: >>> Creating user 'nobody' (Kernel Overflow User) with UID 65534 and GID 65534. DEBUG util.py:459: >>> Creating user 'operator' (operator) with UID 11 and GID 0. DEBUG util.py:459: >>> Creating user 'root' (Super User) with UID 0 and GID 0. DEBUG util.py:459: >>> Creating user 'shutdown' (shutdown) with UID 6 and GID 0. DEBUG util.py:459: >>> Creating user 'sync' (sync) with UID 5 and GID 0. DEBUG util.py:459: >>> DEBUG util.py:459: [ 11/150] Installing setup-0:2.15.0-13. 100% | 6.9 MiB/s | 726.7 KiB | 00m00s DEBUG util.py:459: >>> [RPM] /etc/hosts created as /etc/hosts.rpmnew DEBUG util.py:459: [ 12/150] Installing filesystem-0:3.18- 100% | 390.4 KiB/s | 211.6 KiB | 00m01s DEBUG util.py:459: [ 13/150] Installing basesystem-0:11-22 100% | 11.0 KiB/s | 124.0 B | 00m00s DEBUG util.py:459: [ 14/150] Installing pkgconf-m4-0:2.3.0 100% | 1.1 MiB/s | 14.8 KiB | 00m00s DEBUG util.py:459: [ 15/150] Installing pcre2-syntax-0:10. 100% | 10.8 MiB/s | 276.4 KiB | 00m00s DEBUG util.py:459: [ 16/150] Installing ncurses-base-0:6.5 100% | 5.7 MiB/s | 352.2 KiB | 00m00s DEBUG util.py:459: [ 17/150] Installing glibc-minimal-lang 100% | 11.0 KiB/s | 124.0 B | 00m00s DEBUG util.py:459: [ 18/150] Installing ncurses-libs-0:6.5 100% | 16.7 MiB/s | 921.8 KiB | 00m00s DEBUG util.py:459: [ 19/150] Installing glibc-0:2.41-5.0.r 100% | 16.9 MiB/s | 4.6 MiB | 00m00s DEBUG util.py:459: [ 20/150] Installing bash-0:5.2.37-1.fc 100% | 23.8 MiB/s | 8.0 MiB | 00m00s DEBUG util.py:459: [ 21/150] Installing glibc-common-0:2.4 100% | 9.1 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [ 22/150] Installing glibc-gconv-extra- 100% | 18.7 MiB/s | 6.1 MiB | 00m00s DEBUG util.py:459: [ 23/150] Installing zlib-ng-compat-0:2 100% | 6.1 MiB/s | 105.9 KiB | 00m00s DEBUG util.py:459: [ 24/150] Installing bzip2-libs-0:1.0.8 100% | 4.5 MiB/s | 69.4 KiB | 00m00s DEBUG util.py:459: [ 25/150] Installing xz-libs-1:5.8.1-2. 100% | 9.1 MiB/s | 186.6 KiB | 00m00s DEBUG util.py:459: [ 26/150] Installing libxcrypt-0:4.4.38 100% | 11.4 MiB/s | 315.0 KiB | 00m00s DEBUG util.py:459: [ 27/150] Installing libuuid-0:2.40.4-7 100% | 2.7 MiB/s | 38.3 KiB | 00m00s DEBUG util.py:459: [ 28/150] Installing libblkid-0:2.40.4- 100% | 14.1 MiB/s | 419.9 KiB | 00m00s DEBUG util.py:459: [ 29/150] Installing gmp-1:6.3.0-4.fc42 100% | 15.6 MiB/s | 575.8 KiB | 00m00s DEBUG util.py:459: [ 30/150] Installing libattr-0:2.5.2-5. 100% | 1.5 MiB/s | 21.1 KiB | 00m00s DEBUG util.py:459: [ 31/150] Installing libacl-0:2.3.2-3.f 100% | 2.6 MiB/s | 36.6 KiB | 00m00s DEBUG util.py:459: [ 32/150] Installing readline-0:8.2-13. 100% | 14.6 MiB/s | 462.5 KiB | 00m00s DEBUG util.py:459: [ 33/150] Installing popt-0:1.19-8.fc42 100% | 4.0 MiB/s | 131.1 KiB | 00m00s DEBUG util.py:459: [ 34/150] Installing libzstd-0:1.5.7-1. 100% | 19.3 MiB/s | 891.0 KiB | 00m00s DEBUG util.py:459: [ 35/150] Installing elfutils-libelf-0: 100% | 22.5 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [ 36/150] Installing libstdc++-0:15.1.1 100% | 24.4 MiB/s | 2.4 MiB | 00m00s DEBUG util.py:459: [ 37/150] Installing dwz-0:0.16-1.fc42. 100% | 3.9 MiB/s | 291.9 KiB | 00m00s DEBUG util.py:459: [ 38/150] Installing mpfr-0:4.2.2-1.fc4 100% | 14.6 MiB/s | 537.1 KiB | 00m00s DEBUG util.py:459: [ 39/150] Installing gawk-0:5.3.1-1.fc4 100% | 12.0 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [ 40/150] Installing unzip-0:6.0-66.fc4 100% | 4.7 MiB/s | 362.0 KiB | 00m00s DEBUG util.py:459: [ 41/150] Installing file-libs-0:5.46-3 100% | 40.9 MiB/s | 11.9 MiB | 00m00s DEBUG util.py:459: [ 42/150] Installing file-0:5.46-3.fc42 100% | 1.1 MiB/s | 101.5 KiB | 00m00s DEBUG util.py:459: [ 43/150] Installing crypto-policies-0: 100% | 2.5 MiB/s | 163.5 KiB | 00m00s DEBUG util.py:459: [ 44/150] Installing pcre2-0:10.45-1.fc 100% | 16.9 MiB/s | 606.2 KiB | 00m00s DEBUG util.py:459: [ 45/150] Installing grep-0:3.11-10.fc4 100% | 8.6 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [ 46/150] Installing xz-1:5.8.1-2.fc42. 100% | 9.6 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [ 47/150] Installing libeconf-0:0.7.6-1 100% | 3.6 MiB/s | 62.4 KiB | 00m00s DEBUG util.py:459: [ 48/150] Installing libcap-ng-0:0.8.5- 100% | 3.3 MiB/s | 58.2 KiB | 00m00s DEBUG util.py:459: [ 49/150] Installing audit-libs-0:4.0.3 100% | 11.5 MiB/s | 329.2 KiB | 00m00s DEBUG util.py:459: [ 50/150] Installing pam-libs-0:1.7.0-6 100% | 5.7 MiB/s | 116.4 KiB | 00m00s DEBUG util.py:459: [ 51/150] Installing libcap-0:2.73-2.fc 100% | 2.7 MiB/s | 201.9 KiB | 00m00s DEBUG util.py:459: [ 52/150] Installing libsmartcols-0:2.4 100% | 11.8 MiB/s | 326.6 KiB | 00m00s DEBUG util.py:459: [ 53/150] Installing libsepol-0:3.8-1.f 100% | 17.4 MiB/s | 767.5 KiB | 00m00s DEBUG util.py:459: [ 54/150] Installing libselinux-0:3.8-2 100% | 8.4 MiB/s | 190.1 KiB | 00m00s DEBUG util.py:459: [ 55/150] Installing findutils-1:4.10.0 100% | 13.8 MiB/s | 1.9 MiB | 00m00s DEBUG util.py:459: [ 56/150] Installing sed-0:4.9-4.fc42.r 100% | 8.0 MiB/s | 866.2 KiB | 00m00s DEBUG util.py:459: [ 57/150] Installing libmount-0:2.40.4- 100% | 14.2 MiB/s | 481.1 KiB | 00m00s DEBUG util.py:459: [ 58/150] Installing alternatives-0:1.3 100% | 930.1 KiB/s | 59.5 KiB | 00m00s DEBUG util.py:459: [ 59/150] Installing lz4-libs-0:1.10.0- 100% | 8.6 MiB/s | 194.6 KiB | 00m00s DEBUG util.py:459: [ 60/150] Installing lua-libs-0:5.4.8-1 100% | 10.7 MiB/s | 262.4 KiB | 00m00s DEBUG util.py:459: [ 61/150] Installing libffi-0:3.4.6-5.0 100% | 3.6 MiB/s | 59.3 KiB | 00m00s DEBUG util.py:459: [ 62/150] Installing libtasn1-0:4.20.0- 100% | 7.7 MiB/s | 174.2 KiB | 00m00s DEBUG util.py:459: [ 63/150] Installing p11-kit-0:0.25.5-5 100% | 13.8 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [ 64/150] Installing libunistring-0:1.1 100% | 24.0 MiB/s | 1.7 MiB | 00m00s DEBUG util.py:459: [ 65/150] Installing libidn2-0:2.3.8-1. 100% | 12.6 MiB/s | 591.3 KiB | 00m00s DEBUG util.py:459: [ 66/150] Installing libpsl-0:0.21.5-5. 100% | 4.5 MiB/s | 73.3 KiB | 00m00s DEBUG util.py:459: [ 67/150] Installing p11-kit-trust-0:0. 100% | 4.6 MiB/s | 487.2 KiB | 00m00s DEBUG util.py:459: [ 68/150] Installing zstd-0:1.5.7-1.fc4 100% | 15.1 MiB/s | 2.0 MiB | 00m00s DEBUG util.py:459: [ 69/150] Installing tar-2:1.35-5.fc42. 100% | 17.0 MiB/s | 3.0 MiB | 00m00s DEBUG util.py:459: [ 70/150] Installing libsemanage-0:3.8. 100% | 9.5 MiB/s | 302.8 KiB | 00m00s DEBUG util.py:459: [ 71/150] Installing shadow-utils-2:4.1 100% | 14.4 MiB/s | 4.4 MiB | 00m00s DEBUG util.py:459: [ 72/150] Installing zip-0:3.0-43.fc42. 100% | 8.4 MiB/s | 796.6 KiB | 00m00s DEBUG util.py:459: [ 73/150] Installing libfdisk-0:2.40.4- 100% | 14.8 MiB/s | 532.1 KiB | 00m00s DEBUG util.py:459: [ 74/150] Installing libxml2-0:2.12.10- 100% | 12.9 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [ 75/150] Installing bzip2-0:1.0.8-20.f 100% | 1.3 MiB/s | 91.4 KiB | 00m00s DEBUG util.py:459: [ 76/150] Installing add-determinism-0: 100% | 15.3 MiB/s | 2.2 MiB | 00m00s DEBUG util.py:459: [ 77/150] Installing build-reproducibil 100% | 76.9 KiB/s | 1.0 KiB | 00m00s DEBUG util.py:459: [ 78/150] Installing sqlite-libs-0:3.47 100% | 19.7 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [ 79/150] Installing ed-0:1.21-2.fc42.r 100% | 2.0 MiB/s | 141.2 KiB | 00m00s DEBUG util.py:459: [ 80/150] Installing patch-0:2.8-1.fc42 100% | 3.1 MiB/s | 229.2 KiB | 00m00s DEBUG util.py:459: [ 81/150] Installing filesystem-srpm-ma 100% | 2.5 MiB/s | 38.9 KiB | 00m00s DEBUG util.py:459: [ 82/150] Installing elfutils-default-y 100% | 61.9 KiB/s | 2.0 KiB | 00m00s DEBUG util.py:459: [ 83/150] Installing elfutils-libs-0:0. 100% | 16.6 MiB/s | 750.0 KiB | 00m00s DEBUG util.py:459: [ 84/150] Installing cpio-0:2.15-4.fc42 100% | 9.6 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [ 85/150] Installing diffutils-0:3.12-1 100% | 12.2 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [ 86/150] Installing jansson-0:2.14-2.f 100% | 4.2 MiB/s | 82.4 KiB | 00m00s DEBUG util.py:459: [ 87/150] Installing libgomp-0:15.1.1-2 100% | 15.3 MiB/s | 455.6 KiB | 00m00s DEBUG util.py:459: [ 88/150] Installing json-c-0:0.18-2.fc 100% | 4.6 MiB/s | 79.5 KiB | 00m00s DEBUG util.py:459: [ 89/150] Installing libpkgconf-0:2.3.0 100% | 4.3 MiB/s | 74.8 KiB | 00m00s DEBUG util.py:459: [ 90/150] Installing pkgconf-0:2.3.0-2. 100% | 1.2 MiB/s | 86.8 KiB | 00m00s DEBUG util.py:459: [ 91/150] Installing pkgconf-pkg-config 100% | 28.1 KiB/s | 1.8 KiB | 00m00s DEBUG util.py:459: [ 92/150] Installing xxhash-libs-0:0.8. 100% | 4.7 MiB/s | 87.1 KiB | 00m00s DEBUG util.py:459: [ 93/150] Installing libbrotli-0:1.1.0- 100% | 16.8 MiB/s | 859.2 KiB | 00m00s DEBUG util.py:459: [ 94/150] Installing libnghttp2-0:1.64. 100% | 8.8 MiB/s | 189.0 KiB | 00m00s DEBUG util.py:459: [ 95/150] Installing keyutils-libs-0:1. 100% | 3.0 MiB/s | 51.4 KiB | 00m00s DEBUG util.py:459: [ 96/150] Installing libcom_err-0:1.47. 100% | 3.7 MiB/s | 59.9 KiB | 00m00s DEBUG util.py:459: [ 97/150] Installing libverto-0:0.3.2-1 100% | 1.8 MiB/s | 31.0 KiB | 00m00s DEBUG util.py:459: [ 98/150] Installing libtool-ltdl-0:2.5 100% | 3.6 MiB/s | 62.8 KiB | 00m00s DEBUG util.py:459: [ 99/150] Installing gdbm-libs-1:1.23-9 100% | 6.1 MiB/s | 119.0 KiB | 00m00s DEBUG util.py:459: [100/150] Installing cyrus-sasl-lib-0:2 100% | 14.5 MiB/s | 2.1 MiB | 00m00s DEBUG util.py:459: [101/150] Installing rust-srpm-macros-0 100% | 397.3 KiB/s | 5.6 KiB | 00m00s DEBUG util.py:459: [102/150] Installing qt6-srpm-macros-0: 100% | 60.9 KiB/s | 748.0 B | 00m00s DEBUG util.py:459: [103/150] Installing qt5-srpm-macros-0: 100% | 63.2 KiB/s | 776.0 B | 00m00s DEBUG util.py:459: [104/150] Installing perl-srpm-macros-0 100% | 92.8 KiB/s | 1.1 KiB | 00m00s DEBUG util.py:459: [105/150] Installing package-notes-srpm 100% | 155.3 KiB/s | 2.0 KiB | 00m00s DEBUG util.py:459: [106/150] Installing openblas-srpm-macr 100% | 31.9 KiB/s | 392.0 B | 00m00s DEBUG util.py:459: [107/150] Installing ocaml-srpm-macros- 100% | 168.0 KiB/s | 2.2 KiB | 00m00s DEBUG util.py:459: [108/150] Installing kernel-srpm-macros 100% | 89.5 KiB/s | 2.3 KiB | 00m00s DEBUG util.py:459: [109/150] Installing gnat-srpm-macros-0 100% | 11.0 KiB/s | 1.3 KiB | 00m00s DEBUG util.py:459: [110/150] Installing ghc-srpm-macros-0: 100% | 85.9 KiB/s | 1.0 KiB | 00m00s DEBUG util.py:459: [111/150] Installing fpc-srpm-macros-0: 100% | 37.3 KiB/s | 420.0 B | 00m00s DEBUG util.py:459: [112/150] Installing ansible-srpm-macro 100% | 2.4 MiB/s | 36.2 KiB | 00m00s DEBUG util.py:459: [113/150] Installing coreutils-common-0 100% | 27.6 MiB/s | 11.2 MiB | 00m00s DEBUG util.py:459: [114/150] Installing systemd-libs-0:257 100% | 23.4 MiB/s | 2.5 MiB | 00m00s DEBUG util.py:459: [115/150] Installing openssl-libs-1:3.2 100% | 25.7 MiB/s | 5.9 MiB | 00m00s DEBUG util.py:459: [116/150] Installing coreutils-0:9.6-4. 100% | 18.9 MiB/s | 6.1 MiB | 00m00s DEBUG util.py:459: [117/150] Installing ca-certificates-0: 100% | 412.3 KiB/s | 2.4 MiB | 00m06s DEBUG util.py:459: [118/150] Installing libarchive-0:3.7.7 100% | 16.5 MiB/s | 828.2 KiB | 00m00s DEBUG util.py:459: [119/150] Installing krb5-libs-0:1.21.3 100% | 20.1 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [120/150] Installing libssh-0:0.11.1-4. 100% | 14.3 MiB/s | 541.9 KiB | 00m00s DEBUG util.py:459: [121/150] Installing gzip-0:1.13-3.fc42 100% | 4.5 MiB/s | 390.5 KiB | 00m00s DEBUG util.py:459: [122/150] Installing rpm-sequoia-0:1.7. 100% | 22.8 MiB/s | 2.2 MiB | 00m00s DEBUG util.py:459: [123/150] Installing systemd-standalone 100% | 4.4 MiB/s | 344.5 KiB | 00m00s DEBUG util.py:459: [124/150] Installing rpm-libs-0:4.20.1- 100% | 16.6 MiB/s | 729.1 KiB | 00m00s DEBUG util.py:459: [125/150] Installing rpm-build-libs-0:4 100% | 8.5 MiB/s | 183.8 KiB | 00m00s DEBUG util.py:459: [126/150] Installing libevent-0:2.1.12- 100% | 17.7 MiB/s | 833.2 KiB | 00m00s DEBUG util.py:459: [127/150] Installing openldap-0:2.6.9-3 100% | 13.4 MiB/s | 592.1 KiB | 00m00s DEBUG util.py:459: [128/150] Installing libcurl-0:8.11.1-4 100% | 17.2 MiB/s | 794.4 KiB | 00m00s DEBUG util.py:459: [129/150] Installing elfutils-debuginfo 100% | 996.4 KiB/s | 73.7 KiB | 00m00s DEBUG util.py:459: [130/150] Installing binutils-0:2.44-3. 100% | 26.8 MiB/s | 24.4 MiB | 00m01s DEBUG util.py:459: [131/150] Installing elfutils-0:0.193-2 100% | 17.8 MiB/s | 2.9 MiB | 00m00s DEBUG util.py:459: [132/150] Installing gdb-minimal-0:16.3 100% | 25.7 MiB/s | 13.9 MiB | 00m01s DEBUG util.py:459: [133/150] Installing debugedit-0:5.1-6. 100% | 2.7 MiB/s | 199.1 KiB | 00m00s DEBUG util.py:459: [134/150] Installing curl-0:8.11.1-4.fc 100% | 4.1 MiB/s | 473.7 KiB | 00m00s DEBUG util.py:459: [135/150] Installing rpm-0:4.20.1-1.fc4 100% | 11.3 MiB/s | 2.5 MiB | 00m00s DEBUG util.py:459: [136/150] Installing efi-srpm-macros-0: 100% | 2.5 MiB/s | 41.1 KiB | 00m00s DEBUG util.py:459: [137/150] Installing lua-srpm-macros-0: 100% | 146.3 KiB/s | 1.9 KiB | 00m00s DEBUG util.py:459: [138/150] Installing tree-sitter-srpm-m 100% | 528.7 KiB/s | 7.4 KiB | 00m00s DEBUG util.py:459: [139/150] Installing zig-srpm-macros-0: 100% | 138.7 KiB/s | 1.7 KiB | 00m00s DEBUG util.py:459: [140/150] Installing fonts-srpm-macros- 100% | 3.3 MiB/s | 57.0 KiB | 00m00s DEBUG util.py:459: [141/150] Installing forge-srpm-macros- 100% | 2.5 MiB/s | 40.3 KiB | 00m00s DEBUG util.py:459: [142/150] Installing go-srpm-macros-0:3 100% | 3.6 MiB/s | 62.0 KiB | 00m00s DEBUG util.py:459: [143/150] Installing python-srpm-macros 100% | 3.2 MiB/s | 52.2 KiB | 00m00s DEBUG util.py:459: [144/150] Installing redhat-rpm-config- 100% | 5.7 MiB/s | 192.2 KiB | 00m00s DEBUG util.py:459: [145/150] Installing rpm-build-0:4.20.1 100% | 2.2 MiB/s | 183.6 KiB | 00m00s DEBUG util.py:459: [146/150] Installing pyproject-srpm-mac 100% | 166.9 KiB/s | 2.5 KiB | 00m00s DEBUG util.py:459: [147/150] Installing util-linux-core-0: 100% | 13.3 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [148/150] Installing util-linux-0:2.40. 100% | 15.9 MiB/s | 5.7 MiB | 00m00s DEBUG util.py:459: [149/150] Installing which-0:2.23-2.fc4 100% | 1.2 MiB/s | 85.6 KiB | 00m00s DEBUG util.py:459: [150/150] Installing info-0:7.2-3.fc42. 100% | 36.0 KiB/s | 359.0 KiB | 00m10s DEBUG util.py:459: Warning: skipped OpenPGP checks for 148 packages from repository: build DEBUG util.py:459: Complete! DEBUG util.py:608: Child return code was: 0 DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/sys/fs/selinux'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '/var/lib/mock/f42-spacemit-83-30/root/proc/filesystems'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/dev/pts'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/dev/shm'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/os-release DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/RPMS DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/RPMS DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SPECS DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SPECS DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SRPMS DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SRPMS DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SOURCES DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SOURCES DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/BUILD DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/BUILD DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/BUILDROOT DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/BUILDROOT DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/originals DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/originals DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['userdel', '-f', 'mockbuild', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:459: userdel: user 'mockbuild' does not exist DEBUG util.py:608: Child return code was: 6 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['groupdel', 'mock', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:459: groupdel: group 'mock' does not exist DEBUG util.py:608: Child return code was: 6 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['groupadd', 'mock', '-g', '135', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['useradd', 'mockbuild', '-o', '-u', '984', '-g', '135', '-N', '-d', '/builddir', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:459: useradd warning: mockbuild's uid 984 outside of the UID_MIN 1000 and UID_MAX 60000 range. DEBUG util.py:459: useradd: warning: the home directory /builddir already exists. DEBUG util.py:459: useradd: Not copying any file from skel directory into it. DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/.initialized DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'private,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/var/lib/mock/f42-spacemit-83-30/root', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,private,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:551: Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.tjirsrke:/etc/resolv.conf'] DEBUG util.py:556: Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '2d79671bd30740aa88b8411db22d098f', '-D', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root', '-a', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.tjirsrke:/etc/resolv.conf', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', '/bin/rpm', '-qa', '--root', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False DEBUG util.py:461: libgcc-15.1.1-2.fc42.riscv64 DEBUG util.py:461: libssh-config-0.11.1-4.fc42.noarch DEBUG util.py:461: publicsuffix-list-dafsa-20250116-1.fc42.noarch DEBUG util.py:461: fedora-release-identity-basic-42-26.noarch DEBUG util.py:461: fedora-gpg-keys-42-1.1.riscv64_spacemit_0.noarch DEBUG util.py:461: fedora-repos-42-1.1.riscv64_spacemit_0.noarch DEBUG util.py:461: fedora-release-common-42-26.noarch DEBUG util.py:461: fedora-release-42-26.noarch DEBUG util.py:461: setup-2.15.0-13.fc42.noarch DEBUG util.py:461: filesystem-3.18-37.0.riscv64.fc42.riscv64 DEBUG util.py:461: basesystem-11-22.fc42.noarch DEBUG util.py:461: pkgconf-m4-2.3.0-2.fc42.noarch DEBUG util.py:461: pcre2-syntax-10.45-1.fc42.noarch DEBUG util.py:461: ncurses-base-6.5-5.20250125.fc42.noarch DEBUG util.py:461: glibc-minimal-langpack-2.41-5.0.riscv64.fc42.riscv64 DEBUG util.py:461: ncurses-libs-6.5-5.20250125.fc42.riscv64 DEBUG util.py:461: glibc-2.41-5.0.riscv64.fc42.riscv64 DEBUG util.py:461: bash-5.2.37-1.fc42.riscv64 DEBUG util.py:461: glibc-common-2.41-5.0.riscv64.fc42.riscv64 DEBUG util.py:461: glibc-gconv-extra-2.41-5.0.riscv64.fc42.riscv64 DEBUG util.py:461: zlib-ng-compat-2.2.4-3.fc42.riscv64 DEBUG util.py:461: bzip2-libs-1.0.8-20.fc42.riscv64 DEBUG util.py:461: xz-libs-5.8.1-2.fc42.riscv64 DEBUG util.py:461: libxcrypt-4.4.38-7.fc42.riscv64 DEBUG util.py:461: libuuid-2.40.4-7.fc42.riscv64 DEBUG util.py:461: libblkid-2.40.4-7.fc42.riscv64 DEBUG util.py:461: gmp-6.3.0-4.fc42.riscv64 DEBUG util.py:461: libattr-2.5.2-5.fc42.riscv64 DEBUG util.py:461: libacl-2.3.2-3.fc42.riscv64 DEBUG util.py:461: readline-8.2-13.fc42.riscv64 DEBUG util.py:461: popt-1.19-8.fc42.riscv64 DEBUG util.py:461: libzstd-1.5.7-1.fc42.riscv64 DEBUG util.py:461: elfutils-libelf-0.193-2.fc42.riscv64 DEBUG util.py:461: libstdc++-15.1.1-2.fc42.riscv64 DEBUG util.py:461: dwz-0.16-1.fc42.riscv64 DEBUG util.py:461: mpfr-4.2.2-1.fc42.riscv64 DEBUG util.py:461: gawk-5.3.1-1.fc42.riscv64 DEBUG util.py:461: unzip-6.0-66.fc42.riscv64 DEBUG util.py:461: file-libs-5.46-3.fc42.riscv64 DEBUG util.py:461: file-5.46-3.fc42.riscv64 DEBUG util.py:461: crypto-policies-20250214-1.gitff7551b.fc42.noarch DEBUG util.py:461: pcre2-10.45-1.fc42.riscv64 DEBUG util.py:461: grep-3.11-10.fc42.riscv64 DEBUG util.py:461: xz-5.8.1-2.fc42.riscv64 DEBUG util.py:461: libeconf-0.7.6-1.fc42.riscv64 DEBUG util.py:461: libcap-ng-0.8.5-4.fc42.riscv64 DEBUG util.py:461: audit-libs-4.0.3-2.fc42.riscv64 DEBUG util.py:461: pam-libs-1.7.0-6.fc42.riscv64 DEBUG util.py:461: libcap-2.73-2.fc42.riscv64 DEBUG util.py:461: libsmartcols-2.40.4-7.fc42.riscv64 DEBUG util.py:461: libsepol-3.8-1.fc42.riscv64 DEBUG util.py:461: libselinux-3.8-2.fc42.riscv64 DEBUG util.py:461: findutils-4.10.0-5.fc42.riscv64 DEBUG util.py:461: sed-4.9-4.fc42.riscv64 DEBUG util.py:461: libmount-2.40.4-7.fc42.riscv64 DEBUG util.py:461: alternatives-1.33-1.fc42.riscv64 DEBUG util.py:461: lz4-libs-1.10.0-2.fc42.riscv64 DEBUG util.py:461: lua-libs-5.4.8-1.fc42.riscv64 DEBUG util.py:461: libffi-3.4.6-5.0.riscv64.fc42.riscv64 DEBUG util.py:461: libtasn1-4.20.0-1.fc42.riscv64 DEBUG util.py:461: p11-kit-0.25.5-5.fc42.riscv64 DEBUG util.py:461: libunistring-1.1-9.fc42.riscv64 DEBUG util.py:461: libidn2-2.3.8-1.fc42.riscv64 DEBUG util.py:461: libpsl-0.21.5-5.fc42.riscv64 DEBUG util.py:461: p11-kit-trust-0.25.5-5.fc42.riscv64 DEBUG util.py:461: zstd-1.5.7-1.fc42.riscv64 DEBUG util.py:461: tar-1.35-5.fc42.riscv64 DEBUG util.py:461: libsemanage-3.8.1-2.fc42.riscv64 DEBUG util.py:461: shadow-utils-4.17.4-1.fc42.riscv64 DEBUG util.py:461: zip-3.0-43.fc42.riscv64 DEBUG util.py:461: libfdisk-2.40.4-7.fc42.riscv64 DEBUG util.py:461: libxml2-2.12.10-1.fc42.riscv64 DEBUG util.py:461: bzip2-1.0.8-20.fc42.riscv64 DEBUG util.py:461: add-determinism-0.6.0-1.fc42.riscv64 DEBUG util.py:461: build-reproducibility-srpm-macros-0.6.0-1.fc42.noarch DEBUG util.py:461: sqlite-libs-3.47.2-2.fc42.riscv64 DEBUG util.py:461: ed-1.21-2.fc42.riscv64 DEBUG util.py:461: patch-2.8-1.fc42.riscv64 DEBUG util.py:461: filesystem-srpm-macros-3.18-37.0.riscv64.fc42.noarch DEBUG util.py:461: elfutils-default-yama-scope-0.193-2.fc42.noarch DEBUG util.py:461: elfutils-libs-0.193-2.fc42.riscv64 DEBUG util.py:461: cpio-2.15-4.fc42.riscv64 DEBUG util.py:461: diffutils-3.12-1.fc42.riscv64 DEBUG util.py:461: jansson-2.14-2.fc42.riscv64 DEBUG util.py:461: libgomp-15.1.1-2.fc42.riscv64 DEBUG util.py:461: json-c-0.18-2.fc42.riscv64 DEBUG util.py:461: libpkgconf-2.3.0-2.fc42.riscv64 DEBUG util.py:461: pkgconf-2.3.0-2.fc42.riscv64 DEBUG util.py:461: pkgconf-pkg-config-2.3.0-2.fc42.riscv64 DEBUG util.py:461: xxhash-libs-0.8.3-2.fc42.riscv64 DEBUG util.py:461: libbrotli-1.1.0-6.fc42.riscv64 DEBUG util.py:461: libnghttp2-1.64.0-3.fc42.riscv64 DEBUG util.py:461: keyutils-libs-1.6.3-5.fc42.riscv64 DEBUG util.py:461: libcom_err-1.47.2-3.fc42.riscv64 DEBUG util.py:461: libverto-0.3.2-10.fc42.riscv64 DEBUG util.py:461: libtool-ltdl-2.5.4-4.0.riscv64.fc42.riscv64 DEBUG util.py:461: gdbm-libs-1.23-9.fc42.riscv64 DEBUG util.py:461: cyrus-sasl-lib-2.1.28-30.fc42.riscv64 DEBUG util.py:461: rust-srpm-macros-26.3-4.fc42.noarch DEBUG util.py:461: qt6-srpm-macros-6.9.0-2.0.riscv64.fc42.noarch DEBUG util.py:461: qt5-srpm-macros-5.15.17-1.fc42.noarch DEBUG util.py:461: perl-srpm-macros-1-57.fc42.noarch DEBUG util.py:461: package-notes-srpm-macros-0.5-13.fc42.noarch DEBUG util.py:461: openblas-srpm-macros-2-19.fc42.noarch DEBUG util.py:461: ocaml-srpm-macros-10-4.fc42.noarch DEBUG util.py:461: kernel-srpm-macros-1.0-25.fc42.noarch DEBUG util.py:461: gnat-srpm-macros-6-7.0.riscv64.fc42.noarch DEBUG util.py:461: ghc-srpm-macros-1.9.2-2.fc42.noarch DEBUG util.py:461: fpc-srpm-macros-1.3-14.fc42.noarch DEBUG util.py:461: ansible-srpm-macros-1-17.1.fc42.noarch DEBUG util.py:461: coreutils-common-9.6-4.fc42.riscv64 DEBUG util.py:461: systemd-libs-257.6-1.fc42.riscv64 DEBUG util.py:461: openssl-libs-3.2.4-3.fc42.riscv64 DEBUG util.py:461: coreutils-9.6-4.fc42.riscv64 DEBUG util.py:461: ca-certificates-2024.2.69_v8.0.401-6.fc42.noarch DEBUG util.py:461: libarchive-3.7.7-4.fc42.riscv64 DEBUG util.py:461: krb5-libs-1.21.3-6.fc42.riscv64 DEBUG util.py:461: libssh-0.11.1-4.fc42.riscv64 DEBUG util.py:461: gzip-1.13-3.fc42.riscv64 DEBUG util.py:461: rpm-sequoia-1.7.0-5.fc42.riscv64 DEBUG util.py:461: systemd-standalone-sysusers-257.6-1.fc42.riscv64 DEBUG util.py:461: rpm-libs-4.20.1-1.fc42.riscv64 DEBUG util.py:461: rpm-build-libs-4.20.1-1.fc42.riscv64 DEBUG util.py:461: libevent-2.1.12-15.fc42.riscv64 DEBUG util.py:461: openldap-2.6.9-3.fc42.riscv64 DEBUG util.py:461: libcurl-8.11.1-4.fc42.riscv64 DEBUG util.py:461: elfutils-debuginfod-client-0.193-2.fc42.riscv64 DEBUG util.py:461: binutils-2.44-3.fc42.riscv64 DEBUG util.py:461: elfutils-0.193-2.fc42.riscv64 DEBUG util.py:461: gdb-minimal-16.3-1.fc42.riscv64 DEBUG util.py:461: debugedit-5.1-6.fc42.riscv64 DEBUG util.py:461: curl-8.11.1-4.fc42.riscv64 DEBUG util.py:461: rpm-4.20.1-1.fc42.riscv64 DEBUG util.py:461: efi-srpm-macros-6-3.0.riscv64.fc42.noarch DEBUG util.py:461: lua-srpm-macros-1-15.fc42.noarch DEBUG util.py:461: tree-sitter-srpm-macros-0.1.0-8.fc42.noarch DEBUG util.py:461: zig-srpm-macros-1-4.fc42.noarch DEBUG util.py:461: fonts-srpm-macros-2.0.5-22.fc42.noarch DEBUG util.py:461: forge-srpm-macros-0.4.0-2.fc42.noarch DEBUG util.py:461: go-srpm-macros-3.6.0-6.fc42.noarch DEBUG util.py:461: python-srpm-macros-3.13-4.fc42.noarch DEBUG util.py:461: redhat-rpm-config-342-4.fc42.noarch DEBUG util.py:461: rpm-build-4.20.1-1.fc42.riscv64 DEBUG util.py:461: pyproject-srpm-macros-1.18.1-1.fc42.noarch DEBUG util.py:461: util-linux-core-2.40.4-7.fc42.riscv64 DEBUG util.py:461: util-linux-2.40.4-7.fc42.riscv64 DEBUG util.py:461: which-2.23-2.fc42.riscv64 DEBUG util.py:461: info-7.2-3.fc42.riscv64 DEBUG util.py:608: Child return code was: 0 DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 INFO backend.py:228: Installed packages: INFO backend.py:229: add-determinism-0.6.0-1.fc42.riscv64 alternatives-1.33-1.fc42.riscv64 ansible-srpm-macros-1-17.1.fc42.noarch audit-libs-4.0.3-2.fc42.riscv64 basesystem-11-22.fc42.noarch bash-5.2.37-1.fc42.riscv64 binutils-2.44-3.fc42.riscv64 build-reproducibility-srpm-macros-0.6.0-1.fc42.noarch bzip2-1.0.8-20.fc42.riscv64 bzip2-libs-1.0.8-20.fc42.riscv64 ca-certificates-2024.2.69_v8.0.401-6.fc42.noarch coreutils-9.6-4.fc42.riscv64 coreutils-common-9.6-4.fc42.riscv64 cpio-2.15-4.fc42.riscv64 crypto-policies-20250214-1.gitff7551b.fc42.noarch curl-8.11.1-4.fc42.riscv64 cyrus-sasl-lib-2.1.28-30.fc42.riscv64 debugedit-5.1-6.fc42.riscv64 diffutils-3.12-1.fc42.riscv64 dwz-0.16-1.fc42.riscv64 ed-1.21-2.fc42.riscv64 efi-srpm-macros-6-3.0.riscv64.fc42.noarch elfutils-0.193-2.fc42.riscv64 elfutils-debuginfod-client-0.193-2.fc42.riscv64 elfutils-default-yama-scope-0.193-2.fc42.noarch elfutils-libelf-0.193-2.fc42.riscv64 elfutils-libs-0.193-2.fc42.riscv64 fedora-gpg-keys-42-1.1.riscv64_spacemit_0.noarch fedora-release-42-26.noarch fedora-release-common-42-26.noarch fedora-release-identity-basic-42-26.noarch fedora-repos-42-1.1.riscv64_spacemit_0.noarch file-5.46-3.fc42.riscv64 file-libs-5.46-3.fc42.riscv64 filesystem-3.18-37.0.riscv64.fc42.riscv64 filesystem-srpm-macros-3.18-37.0.riscv64.fc42.noarch findutils-4.10.0-5.fc42.riscv64 fonts-srpm-macros-2.0.5-22.fc42.noarch forge-srpm-macros-0.4.0-2.fc42.noarch fpc-srpm-macros-1.3-14.fc42.noarch gawk-5.3.1-1.fc42.riscv64 gdb-minimal-16.3-1.fc42.riscv64 gdbm-libs-1.23-9.fc42.riscv64 ghc-srpm-macros-1.9.2-2.fc42.noarch glibc-2.41-5.0.riscv64.fc42.riscv64 glibc-common-2.41-5.0.riscv64.fc42.riscv64 glibc-gconv-extra-2.41-5.0.riscv64.fc42.riscv64 glibc-minimal-langpack-2.41-5.0.riscv64.fc42.riscv64 gmp-6.3.0-4.fc42.riscv64 gnat-srpm-macros-6-7.0.riscv64.fc42.noarch go-srpm-macros-3.6.0-6.fc42.noarch grep-3.11-10.fc42.riscv64 gzip-1.13-3.fc42.riscv64 info-7.2-3.fc42.riscv64 jansson-2.14-2.fc42.riscv64 json-c-0.18-2.fc42.riscv64 kernel-srpm-macros-1.0-25.fc42.noarch keyutils-libs-1.6.3-5.fc42.riscv64 krb5-libs-1.21.3-6.fc42.riscv64 libacl-2.3.2-3.fc42.riscv64 libarchive-3.7.7-4.fc42.riscv64 libattr-2.5.2-5.fc42.riscv64 libblkid-2.40.4-7.fc42.riscv64 libbrotli-1.1.0-6.fc42.riscv64 libcap-2.73-2.fc42.riscv64 libcap-ng-0.8.5-4.fc42.riscv64 libcom_err-1.47.2-3.fc42.riscv64 libcurl-8.11.1-4.fc42.riscv64 libeconf-0.7.6-1.fc42.riscv64 libevent-2.1.12-15.fc42.riscv64 libfdisk-2.40.4-7.fc42.riscv64 libffi-3.4.6-5.0.riscv64.fc42.riscv64 libgcc-15.1.1-2.fc42.riscv64 libgomp-15.1.1-2.fc42.riscv64 libidn2-2.3.8-1.fc42.riscv64 libmount-2.40.4-7.fc42.riscv64 libnghttp2-1.64.0-3.fc42.riscv64 libpkgconf-2.3.0-2.fc42.riscv64 libpsl-0.21.5-5.fc42.riscv64 libselinux-3.8-2.fc42.riscv64 libsemanage-3.8.1-2.fc42.riscv64 libsepol-3.8-1.fc42.riscv64 libsmartcols-2.40.4-7.fc42.riscv64 libssh-0.11.1-4.fc42.riscv64 libssh-config-0.11.1-4.fc42.noarch libstdc++-15.1.1-2.fc42.riscv64 libtasn1-4.20.0-1.fc42.riscv64 libtool-ltdl-2.5.4-4.0.riscv64.fc42.riscv64 libunistring-1.1-9.fc42.riscv64 libuuid-2.40.4-7.fc42.riscv64 libverto-0.3.2-10.fc42.riscv64 libxcrypt-4.4.38-7.fc42.riscv64 libxml2-2.12.10-1.fc42.riscv64 libzstd-1.5.7-1.fc42.riscv64 lua-libs-5.4.8-1.fc42.riscv64 lua-srpm-macros-1-15.fc42.noarch lz4-libs-1.10.0-2.fc42.riscv64 mpfr-4.2.2-1.fc42.riscv64 ncurses-base-6.5-5.20250125.fc42.noarch ncurses-libs-6.5-5.20250125.fc42.riscv64 ocaml-srpm-macros-10-4.fc42.noarch openblas-srpm-macros-2-19.fc42.noarch openldap-2.6.9-3.fc42.riscv64 openssl-libs-3.2.4-3.fc42.riscv64 p11-kit-0.25.5-5.fc42.riscv64 p11-kit-trust-0.25.5-5.fc42.riscv64 package-notes-srpm-macros-0.5-13.fc42.noarch pam-libs-1.7.0-6.fc42.riscv64 patch-2.8-1.fc42.riscv64 pcre2-10.45-1.fc42.riscv64 pcre2-syntax-10.45-1.fc42.noarch perl-srpm-macros-1-57.fc42.noarch pkgconf-2.3.0-2.fc42.riscv64 pkgconf-m4-2.3.0-2.fc42.noarch pkgconf-pkg-config-2.3.0-2.fc42.riscv64 popt-1.19-8.fc42.riscv64 publicsuffix-list-dafsa-20250116-1.fc42.noarch pyproject-srpm-macros-1.18.1-1.fc42.noarch python-srpm-macros-3.13-4.fc42.noarch qt5-srpm-macros-5.15.17-1.fc42.noarch qt6-srpm-macros-6.9.0-2.0.riscv64.fc42.noarch readline-8.2-13.fc42.riscv64 redhat-rpm-config-342-4.fc42.noarch rpm-4.20.1-1.fc42.riscv64 rpm-build-4.20.1-1.fc42.riscv64 rpm-build-libs-4.20.1-1.fc42.riscv64 rpm-libs-4.20.1-1.fc42.riscv64 rpm-sequoia-1.7.0-5.fc42.riscv64 rust-srpm-macros-26.3-4.fc42.noarch sed-4.9-4.fc42.riscv64 setup-2.15.0-13.fc42.noarch shadow-utils-4.17.4-1.fc42.riscv64 sqlite-libs-3.47.2-2.fc42.riscv64 systemd-libs-257.6-1.fc42.riscv64 systemd-standalone-sysusers-257.6-1.fc42.riscv64 tar-1.35-5.fc42.riscv64 tree-sitter-srpm-macros-0.1.0-8.fc42.noarch unzip-6.0-66.fc42.riscv64 util-linux-2.40.4-7.fc42.riscv64 util-linux-core-2.40.4-7.fc42.riscv64 which-2.23-2.fc42.riscv64 xxhash-libs-0.8.3-2.fc42.riscv64 xz-5.8.1-2.fc42.riscv64 xz-libs-5.8.1-2.fc42.riscv64 zig-srpm-macros-1-4.fc42.noarch zip-3.0-43.fc42.riscv64 zlib-ng-compat-2.2.4-3.fc42.riscv64 zstd-1.5.7-1.fc42.riscv64 DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30-bootstrap/root INFO buildroot.py:667: Mock Version: 6.2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/results INFO buildroot.py:318: calling preinit hooks DEBUG buildroot.py:723: create skeleton dirs DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/dbus DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/log DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/cache/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/cache/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/tmp/ccache DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf/vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum.repos.d DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/pts DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/shm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/mapper DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/mapper DEBUG buildroot.py:867: kernel version == 6.6.96-200.eswin.fc42.riscv64 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/fstab DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum/yum.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf/dnf.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/log/yum.log DEBUG buildroot.py:332: rootdir = /var/lib/mock/f42-spacemit-83-30-bootstrap/root DEBUG buildroot.py:333: resultdir = /var/lib/mock/f42-spacemit-83-30-bootstrap/results DEBUG package_manager.py:63: searching for 'dnf5' package manager or alternatives INFO buildroot.py:181: Package manager dnf5 detected and used (fallback) DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/mock DEBUG package_manager.py:404: copying CA trust dir into chroot: /etc/pki/ca-trust => /etc/pki/ca-trust DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust with files from /etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/./extracted DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/./source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/edk2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/java DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/openssl DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/pem DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/pem/directory-hash DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/source/anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/source/blocklist DEBUG package_manager.py:404: copying CA trust dir into chroot: /usr/share/pki/ca-trust-source => /usr/share/pki/ca-trust-source DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source with files from /usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source/./anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source/./blocklist DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share DEBUG package_manager.py:388: Copying /usr/share/distribution-gpg-keys to the bootstrap chroot DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['cp', '-a', '/usr/share/distribution-gpg-keys', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf DEBUG package_manager.py:691: configure DNF vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc DEBUG buildroot.py:38: method _make_users skipped in bootstrap DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/.initialized DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/result INFO buildroot.py:318: calling preinit hooks DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/usr/bin/lscpu'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: Architecture: riscv64 DEBUG util.py:461: Byte Order: Little Endian DEBUG util.py:461: CPU(s): 4 DEBUG util.py:461: On-line CPU(s) list: 0-3 DEBUG util.py:461: Vendor ID: 0x489 DEBUG util.py:461: Model name: eswin,eic770x DEBUG util.py:461: CPU family: 0x8000000000000008 DEBUG util.py:461: Model: 0x6220425 DEBUG util.py:461: Thread(s) per core: 1 DEBUG util.py:461: Core(s) per socket: 4 DEBUG util.py:461: Socket(s): 1 DEBUG util.py:461: CPU(s) scaling MHz: 100% DEBUG util.py:461: CPU max MHz: 1800.0000 DEBUG util.py:461: CPU min MHz: 24.0000 DEBUG util.py:461: L1d cache: 128 KiB (4 instances) DEBUG util.py:461: L1i cache: 128 KiB (4 instances) DEBUG util.py:461: L2 cache: 1 MiB (4 instances) DEBUG util.py:461: L3 cache: 4 MiB (1 instance) DEBUG util.py:461: NUMA node(s): 1 DEBUG util.py:461: NUMA node0 CPU(s): 0-3 DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/free'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: total used free shared buff/cache available DEBUG util.py:461: Mem: 32871676 901292 30829124 2228 1499416 31970384 DEBUG util.py:461: Swap: 41943032 0 41943032 DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/df', '-H', '-T', '/var/lib/mock/f42-spacemit-83-30/root', '/var/cache/mock'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: Filesystem Type Size Used Avail Use% Mounted on DEBUG util.py:461: /dev/sda3 btrfs 989G 5.4G 973G 1% /var DEBUG util.py:461: /dev/sda3 btrfs 989G 5.4G 973G 1% /var DEBUG util.py:608: Child return code was: 0 DEBUG buildroot.py:723: create skeleton dirs DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/dbus DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/log DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/cache/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/cache/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/tmp/ccache DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf/vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/yum.repos.d DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/proc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/pts DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/shm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/mapper DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/dev/mapper DEBUG buildroot.py:867: kernel version == 6.6.96-200.eswin.fc42.riscv64 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/fstab DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/yum/yum.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf/dnf.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/var/log/yum.log DEBUG buildroot.py:332: rootdir = /var/lib/mock/f42-spacemit-83-30/root DEBUG buildroot.py:333: resultdir = /var/lib/mock/f42-spacemit-83-30/result INFO buildroot.py:181: Package manager dnf5 detected and used (direct choice) DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/mock DEBUG package_manager.py:404: copying CA trust dir into chroot: /etc/pki/ca-trust => /etc/pki/ca-trust DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust with files from /etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/./extracted DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/./source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/edk2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/java DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/openssl DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/pem DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/pem/directory-hash DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/source/anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/source/blocklist DEBUG package_manager.py:404: copying CA trust dir into chroot: /usr/share/pki/ca-trust-source => /usr/share/pki/ca-trust-source DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source with files from /usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source/./anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source/./blocklist DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf DEBUG package_manager.py:691: configure DNF vars DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['userdel', '-f', 'mockbuild', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['groupdel', 'mock', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['groupadd', 'mock', '-g', '135', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['useradd', 'mockbuild', '-o', '-u', '984', '-g', '135', '-N', '-d', '/builddir', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:459: useradd warning: mockbuild's uid 984 outside of the UID_MIN 1000 and UID_MAX 60000 range. DEBUG util.py:459: useradd: warning: the home directory /builddir already exists. DEBUG util.py:459: useradd: Not copying any file from skel directory into it. DEBUG util.py:459: Creating mailbox file: File exists DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/.initialized INFO backend.py:386: Running in chroot: ['uname -r'] DEBUG util.py:634: child environment: None DEBUG util.py:551: Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.nmfljjx3:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] DEBUG util.py:556: Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '985457b476bc4525a0cd1f53b9a8551f', '-D', '/var/lib/mock/f42-spacemit-83-30/root', '-a', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.nmfljjx3:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', '/bin/sh', '-c', 'uname -r'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False DEBUG util.py:461: 6.6.96-200.eswin.fc42.riscv64 DEBUG util.py:608: Child return code was: 0 DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30-bootstrap/root INFO buildroot.py:667: Mock Version: 6.2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/results INFO buildroot.py:318: calling preinit hooks DEBUG buildroot.py:723: create skeleton dirs DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/dbus DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/log DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/cache/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/cache/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/tmp/ccache DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf/vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum.repos.d DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum.repos.d DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/proc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/sys DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/pts DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/shm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/mapper DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/dev/mapper DEBUG buildroot.py:867: kernel version == 6.6.96-200.eswin.fc42.riscv64 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/fstab DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/yum/yum.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf/dnf.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/log/yum.log DEBUG buildroot.py:332: rootdir = /var/lib/mock/f42-spacemit-83-30-bootstrap/root DEBUG buildroot.py:333: resultdir = /var/lib/mock/f42-spacemit-83-30-bootstrap/results DEBUG package_manager.py:63: searching for 'dnf5' package manager or alternatives INFO buildroot.py:181: Package manager dnf5 detected and used (fallback) DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/mock DEBUG package_manager.py:404: copying CA trust dir into chroot: /etc/pki/ca-trust => /etc/pki/ca-trust DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust with files from /etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/./extracted DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/./source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/edk2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/java DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/openssl DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/pem DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/extracted/pem/directory-hash DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/source/anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/pki/ca-trust/source/blocklist DEBUG package_manager.py:404: copying CA trust dir into chroot: /usr/share/pki/ca-trust-source => /usr/share/pki/ca-trust-source DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source with files from /usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source/./anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share/pki/ca-trust-source/./blocklist DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share DEBUG package_manager.py:388: Copying /usr/share/distribution-gpg-keys to the bootstrap chroot DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['cp', '-a', '/usr/share/distribution-gpg-keys', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/usr/share'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc/dnf DEBUG package_manager.py:691: configure DNF vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/etc DEBUG buildroot.py:38: method _cleanup_homedir skipped in bootstrap DEBUG buildroot.py:38: method _setup_build_dirs skipped in bootstrap DEBUG buildroot.py:38: method _make_users skipped in bootstrap DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/.initialized DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/result INFO buildroot.py:318: calling preinit hooks DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/usr/bin/lscpu'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: Architecture: riscv64 DEBUG util.py:461: Byte Order: Little Endian DEBUG util.py:461: CPU(s): 4 DEBUG util.py:461: On-line CPU(s) list: 0-3 DEBUG util.py:461: Vendor ID: 0x489 DEBUG util.py:461: Model name: eswin,eic770x DEBUG util.py:461: CPU family: 0x8000000000000008 DEBUG util.py:461: Model: 0x6220425 DEBUG util.py:461: Thread(s) per core: 1 DEBUG util.py:461: Core(s) per socket: 4 DEBUG util.py:461: Socket(s): 1 DEBUG util.py:461: CPU(s) scaling MHz: 100% DEBUG util.py:461: CPU max MHz: 1800.0000 DEBUG util.py:461: CPU min MHz: 24.0000 DEBUG util.py:461: L1d cache: 128 KiB (4 instances) DEBUG util.py:461: L1i cache: 128 KiB (4 instances) DEBUG util.py:461: L2 cache: 1 MiB (4 instances) DEBUG util.py:461: L3 cache: 4 MiB (1 instance) DEBUG util.py:461: NUMA node(s): 1 DEBUG util.py:461: NUMA node0 CPU(s): 0-3 DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/free'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: total used free shared buff/cache available DEBUG util.py:461: Mem: 32871676 925360 30805076 2228 1499408 31946316 DEBUG util.py:461: Swap: 41943032 0 41943032 DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/df', '-H', '-T', '/var/lib/mock/f42-spacemit-83-30/root', '/var/cache/mock'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: Filesystem Type Size Used Avail Use% Mounted on DEBUG util.py:461: /dev/sda3 btrfs 989G 5.4G 973G 1% /var DEBUG util.py:461: /dev/sda3 btrfs 989G 5.4G 973G 1% /var DEBUG util.py:608: Child return code was: 0 DEBUG buildroot.py:723: create skeleton dirs DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/lib/dbus DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/log DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/cache/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/cache/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/rpm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/tmp/ccache DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/var/tmp DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf/vars DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/yum.repos.d DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/etc/yum.repos.d DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/yum DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/proc DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/pts DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/shm DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/mapper DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/dev/mapper DEBUG buildroot.py:867: kernel version == 6.6.96-200.eswin.fc42.riscv64 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/fstab DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/yum/yum.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf/dnf.conf DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/var/log/yum.log DEBUG buildroot.py:332: rootdir = /var/lib/mock/f42-spacemit-83-30/root DEBUG buildroot.py:333: resultdir = /var/lib/mock/f42-spacemit-83-30/result INFO buildroot.py:181: Package manager dnf5 detected and used (direct choice) DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/mock DEBUG package_manager.py:404: copying CA trust dir into chroot: /etc/pki/ca-trust => /etc/pki/ca-trust DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust with files from /etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/./extracted DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/./source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/edk2 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/java DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/openssl DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/pem DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/extracted/pem/directory-hash DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/source/anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/pki/ca-trust/source/blocklist DEBUG package_manager.py:404: copying CA trust dir into chroot: /usr/share/pki/ca-trust-source => /usr/share/pki/ca-trust-source DEBUG file_util.py:158: Updating files in /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source with files from /usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source/./anchors DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/usr/share/pki/ca-trust-source/./blocklist DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/etc/dnf DEBUG package_manager.py:691: configure DNF vars DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['rpm', '-q', 'rpm', 'rpm-sequoia', 'python3-dnf', 'python3-dnf-plugins-core', 'yum', 'yum-utils', 'dnf5', 'dnf5-plugins', '--root', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:461: rpm-4.20.1-1.fc42.riscv64 DEBUG util.py:461: rpm-sequoia-1.7.0-5.fc42.riscv64 DEBUG util.py:461: package python3-dnf is not installed DEBUG util.py:461: package python3-dnf-plugins-core is not installed DEBUG util.py:461: package yum is not installed DEBUG util.py:461: package yum-utils is not installed DEBUG util.py:461: dnf5-5.2.13.1-1.fc42.riscv64 DEBUG util.py:461: dnf5-plugins-5.2.13.1-1.fc42.riscv64 DEBUG util.py:608: Child return code was: 4 INFO package_manager.py:201: Buildroot is handled by package management installed into bootstrap: rpm-4.20.1-1.fc42.riscv64 rpm-sequoia-1.7.0-5.fc42.riscv64 dnf5-5.2.13.1-1.fc42.riscv64 dnf5-plugins-5.2.13.1-1.fc42.riscv64 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/RPMS DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/RPMS DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SPECS DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SPECS DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SRPMS DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SRPMS DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/SOURCES DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/BUILD DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/BUILD DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/BUILDROOT DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/BUILDROOT DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/originals DEBUG file_util.py:21: created dir: /var/lib/mock/f42-spacemit-83-30/root/builddir/build/originals DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/builddir DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['userdel', '-f', 'mockbuild', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['groupdel', 'mock', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['groupadd', 'mock', '-g', '135', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['useradd', 'mockbuild', '-o', '-u', '984', '-g', '135', '-N', '-d', '/builddir', '--prefix', '/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:459: useradd warning: mockbuild's uid 984 outside of the UID_MIN 1000 and UID_MAX 60000 range. DEBUG util.py:459: useradd: warning: the home directory /builddir already exists. DEBUG util.py:459: useradd: Not copying any file from skel directory into it. DEBUG util.py:459: Creating mailbox file: File exists DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:30: touching file: /var/lib/mock/f42-spacemit-83-30/root/.initialized DEBUG util.py:634: child environment: None DEBUG util.py:551: Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.58jb9hvy:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] DEBUG util.py:556: Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '93487806687c4429920b56c3a344991c', '-D', '/var/lib/mock/f42-spacemit-83-30/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.58jb9hvy:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', '/bin/rpm', '-Uvh', '--nodeps', '/builddir/build/originals/kernel-6.15.5-200.spacemit.fc42.src.rpm'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False DEBUG util.py:461: Updating / installing... DEBUG util.py:461: kernel-6.15.5-200.spacemit.fc42 ######################################## DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:551: Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.58jb9hvy:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] DEBUG util.py:556: Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '417be6dc67c348258390ce12229c4a02', '-D', '/var/lib/mock/f42-spacemit-83-30/root', '-a', '-u', 'mockbuild', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.58jb9hvy:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', '/bin/rpm', '-qpl', '/builddir/build/originals/kernel-6.15.5-200.spacemit.fc42.src.rpm'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False DEBUG util.py:461: 0001-add-k1-pro-base-platform-support.patch DEBUG util.py:461: 0002-media-support-a-new-vpu-driver-which-use-V4L2-standa.patch DEBUG util.py:461: 0003-add-SOC_SPACEMIT_K1-for-spacemit-k1-serial-SOCs.patch DEBUG util.py:461: 0004-update-kernel-configuration-for-qemu-board.patch DEBUG util.py:461: 0005-kernel-config-add-SOC_SPACEMIT_K1_FPGA-option-for-fp.patch DEBUG util.py:461: 0006-fpga-kconfig-update-kernel-configuration-for-k1-pro-.patch DEBUG util.py:461: 0007-qemu-kconfig-update-kernel-configuration-for-k1-pro-.patch DEBUG util.py:461: 0008-sim-kconfig-update-kernel-configuration-for-k1-pro-s.patch DEBUG util.py:461: 0009-add-k1pro-ccu-driver-and-config.patch DEBUG util.py:461: 0010-add-k1pro-reset-controller-driver-and-config.patch DEBUG util.py:461: 0011-update-kernel-config-add-FPGA-label-and-enable-debug.patch DEBUG util.py:461: 0012-dtsi-enable-zicbom.patch DEBUG util.py:461: 0013-change-dtb-configuration-to-k1-pro-SOC-1.-ddr-uart-p.patch DEBUG util.py:461: 0014-dts-add-tcm-node-kernel-add-tcm-driver.patch DEBUG util.py:461: 0015-add-.h-for-clock-reset-and-change-reg.patch DEBUG util.py:461: 0016-pwm-dwc-driver-loaded-by-platform-changes-in-Makefil.patch DEBUG util.py:461: 0017-sync-clk-reset-V1.1-spec-and-use-CLK_OF_DECLARE-for-.patch DEBUG util.py:461: 0018-spi-adding-the-driver-for-Designware-enhanced-spi-co.patch DEBUG util.py:461: 0019-riscv-support-svpbmt.patch DEBUG util.py:461: 0020-usb-dwc3-support-spacemit-platform.patch DEBUG util.py:461: 0021-dts-dwc3-add-dts-config-for-k1-pro.patch DEBUG util.py:461: 0022-usb-update-usb-kernel-configuration.patch DEBUG util.py:461: 0023-usb-dwc3-avoid-suspend-phy.patch DEBUG util.py:461: 0024-riscv-mm-fix-reserve-cma-for-platform-not-having-ZON.patch DEBUG util.py:461: 0025-kconfig-enable-cma-for-k1-pro-board.patch DEBUG util.py:461: 0026-ethernet-adding-the-driver-of-the-Designware-gmac-co.patch DEBUG util.py:461: 0027-reset-reset-driver-handle-all-global-soft-reset-sing.patch DEBUG util.py:461: 0028-dma-dw-axi-dma-support-handshake-num-more-than-16.patch DEBUG util.py:461: 0029-usb-dwc3-modify-reset-control-for-usb31.patch DEBUG util.py:461: 0030-usb-dwc3-modify-DMA-capability.patch DEBUG util.py:461: 0031-dma-fix-an-error-burst_trans_len-undeclare-in-dma-dr.patch DEBUG util.py:461: 0032-mmc-support-spacemit-k1-pro-platform.patch DEBUG util.py:461: 0033-mmc-dts-support-emmc-and-sdcard.patch DEBUG util.py:461: 0034-reset-add-spinlock-for-timing-issue.patch DEBUG util.py:461: 0035-mmc-modify-reset-card-only-once.patch DEBUG util.py:461: 0036-reshape-dtsi-format-use-table-to-replace-space.patch DEBUG util.py:461: 0037-k1-pro.dtsi-add-pmu-configs.patch DEBUG util.py:461: 0038-pcie-support-spacemit-k1-pro-pcie-controller-RC-mode.patch DEBUG util.py:461: 0039-usb-xhci-modify-DMA-capability-for-k1-pro-platform.patch DEBUG util.py:461: 0040-change-dts-for-I2C-support.patch DEBUG util.py:461: 0041-can-add-can-device-driver-and-kernel-config.patch DEBUG util.py:461: 0042-ccu-add-mcu-clocks.patch DEBUG util.py:461: 0043-fs-support-nfs.patch DEBUG util.py:461: 0044-spi-support-spi-nor-and-correct-the-params-of-the-sp.patch DEBUG util.py:461: 0045-mmc-enable-host-version-4-mode.patch DEBUG util.py:461: 0046-mmc-deattach-clk-400k-during-mmc_rescan.patch DEBUG util.py:461: 0047-add-script-for-extract-generate-rootfs.cpio.gz.patch DEBUG util.py:461: 0048-mmc-increase-date-timeout-counter-value-to-max.patch DEBUG util.py:461: 0049-remoteproc-support-bringup-esos-for-spacemit-k1-pro_.patch DEBUG util.py:461: 0050-media-support-usb-media-enable-uvc-and-f_uvc.patch DEBUG util.py:461: 0051-vpu-fix-vpu-compile-error-for-linux6.1.patch DEBUG util.py:461: 0052-vpu-add-vpu-dts-config.patch DEBUG util.py:461: 0053-can-update-kernel-defconfig-IPMS_CAN-y.patch DEBUG util.py:461: 0054-clk-add-spinlock-and-mailbox-clock-for-mcu-system.patch DEBUG util.py:461: 0055-reset-add-spinlock-and-mailbox-reset-for-mcu-system.patch DEBUG util.py:461: 0056-mailbox-enable-spacemit-mailbox-driver.patch DEBUG util.py:461: 0057-scmi-support-arm-s-scmi-protocol-for-spacemit-platfo.patch DEBUG util.py:461: 0058-rproc-change-compatible-name-for-rproc-driver.patch DEBUG util.py:461: 0059-pinctrl-support-the-driver-of-spacemit-pinctrl-contr.patch DEBUG util.py:461: 0060-dts-add-the-table-of-pin-functions.patch DEBUG util.py:461: 0061-vpu-add-reset-control-logic.patch DEBUG util.py:461: 0062-vpu-add-device-caps-config.patch DEBUG util.py:461: 0063-vpu-remove-severity-and-drain-file-node-for-probe-er.patch DEBUG util.py:461: 0064-vpu-enable-debug-mode.patch DEBUG util.py:461: 0065-arm_scmi-regulator-enable-an-dummy-regulator-using-s.patch DEBUG util.py:461: 0066-dts-disable-vpu-as-some-bitfiles-have-no-vpu.patch DEBUG util.py:461: 0067-ethernet-support-ethernet-qos.patch DEBUG util.py:461: 0068-scmi-enable-scmi-power-domain-protocol.patch DEBUG util.py:461: 0069-scmi-voltage_domain-add-vlittle-vgpu-nodes-in-scmi-d.patch DEBUG util.py:461: 0070-cpufreq-support-scmi-cpufreq-driver-spacemit-platfor.patch DEBUG util.py:461: 0071-wifi-cfg80211-enable-wireless-LAN-configuration-API.patch DEBUG util.py:461: 0072-mmc-dts-support-sdio-interface.patch DEBUG util.py:461: 0073-GMAC-support-IEEE_1588-hwtimestamp.patch DEBUG util.py:461: 0074-usb-dts-add-dwc2-dts-for-k1-pro-fpga.patch DEBUG util.py:461: 0075-usb-kconfig-enable-dwc2-configuration.patch DEBUG util.py:461: 0076-usb-dwc2-add-params-for-k1-pro-fpga.patch DEBUG util.py:461: 0077-pinctrl-change-the-format-of-pin-config.patch DEBUG util.py:461: 0078-spi-nand-support-2x-4x-8x-for-spi-nand-tx-and-rx.patch DEBUG util.py:461: 0079-ubi-kconfig-enable-ubi-configuration.patch DEBUG util.py:461: 0080-usb-dwc2-modify-gadget-DMA-capability.patch DEBUG util.py:461: 0081-add-k1-x-device-support.patch DEBUG util.py:461: 0082-update-vpu-driver.patch DEBUG util.py:461: 0083-cpu-support-cpu-hotplug.patch DEBUG util.py:461: 0084-pinctrl-modify-the-format-of-the-pinctrl-group-name.patch DEBUG util.py:461: 0085-update-dts-for-k1-x-platform.patch DEBUG util.py:461: 0086-add-pxa_k1x-driver-for-k1x-platform.patch DEBUG util.py:461: 0087-k1pro-enable-first-can-use-version-of-cpuidle.patch DEBUG util.py:461: 0088-k1x-multi-core-modify-the-configurations-related-to-.patch DEBUG util.py:461: 0089-k1pro-add-i2c-configuration.patch DEBUG util.py:461: 0090-disable-pm-power-management-is-not-support-now.patch DEBUG util.py:461: 0091-k1-x-add-mmp_pdma-driver-support.patch DEBUG util.py:461: 0092-k1x-add-k1-x_fpga-1x4-2x2-proj.patch DEBUG util.py:461: 0093-k1-x-support-pxa-uart-driver-dts-configs-pm-amend-in.patch DEBUG util.py:461: 0094-ethernet-adding-gmac-driver-for-k1-x.patch DEBUG util.py:461: 0095-mmc-support-spacemit-k1x-platform.patch DEBUG util.py:461: 0096-ethernet-change-the-phy-mode-config-from-device-tree.patch DEBUG util.py:461: 0097-hotplug-we-d-better-flush-the-local-l2-cache-when-on.patch DEBUG util.py:461: 0098-mmc-update-dts-remove-axi-node.patch DEBUG util.py:461: 0099-turn-off-CONFIG_PM-for-debug.patch DEBUG util.py:461: 0100-config-support-gmac-driver-for-k1-x-1x4-and-2x2.patch DEBUG util.py:461: 0101-support-tcm-for-k1x.patch DEBUG util.py:461: 0102-add-udma-driver-for-userspace.patch DEBUG util.py:461: 0103-dma-copy-use-vaddr.patch DEBUG util.py:461: 0104-rm-udma-log.patch DEBUG util.py:461: 0105-update-defconfig-for-support-sdmmc-udma.patch DEBUG util.py:461: 0106-add-mutex-va2pa-fix-tcm_discontinuous_malloc.patch DEBUG util.py:461: 0107-update-for-support-tcm.patch DEBUG util.py:461: 0108-usb-gadget-support-k1x-udc.patch DEBUG util.py:461: 0109-pcie-adding-pcie-driver-for-k1x.patch DEBUG util.py:461: 0110-usb-dwc3-support-k1x-platform.patch DEBUG util.py:461: 0111-k1x-add-pwm-pxa-driver-support.patch DEBUG util.py:461: 0112-update-vpu-driver.patch DEBUG util.py:461: 0113-k1pro-adjust-pwm-driver-config-name.patch DEBUG util.py:461: 0114-k1x-add-soc-timer-driver-support.patch DEBUG util.py:461: 0115-k1pro-deconfig-axi-dma-driver-Y.patch DEBUG util.py:461: 0116-support-I2C-for-k1x.patch DEBUG util.py:461: 0117-media-k1x-vpu-reshape-file-style.patch DEBUG util.py:461: 0118-update-kernel-default-config.patch DEBUG util.py:461: 0119-reset-update-reset-controller-driver.patch DEBUG util.py:461: 0120-ccu-update-clock-controller-driver.patch DEBUG util.py:461: 0121-fix-config-PCIE_SPACEMIT-depends-on-CONFIG_SOC_SPACE.patch DEBUG util.py:461: 0122-k1x-switch-pwm-deconfig-Y-on-1x4-2x2-board.patch DEBUG util.py:461: 0123-k1pro-cpuidle-support-cpuidle.patch DEBUG util.py:461: 0124-k1pro-add-k1pro-fpga_1x4-k1pro-fpga_2x2-proj.patch DEBUG util.py:461: 0125-k1-x-add-k1x-gpio-driver-support.patch DEBUG util.py:461: 0126-riscv-spacemit-remove-k1pro-configuration-it-is-just.patch DEBUG util.py:461: 0127-yk1x-add-the-first-version-of-pm-domain.patch DEBUG util.py:461: 0128-k1-x-add-gmac-PTP-support.patch DEBUG util.py:461: 0129-usb-dwc2-update-fifo-and-reset-config-for-k1-pro.patch DEBUG util.py:461: 0130-k1x-enable-dmabuf.patch DEBUG util.py:461: 0131-qspi-adding-driver-for-k1x-qspi-controller.patch DEBUG util.py:461: 0132-qspi-fix-typo-cause-compilation-errors.patch DEBUG util.py:461: 0133-add-spacemit-ir-rx-driver.patch DEBUG util.py:461: 0134-k1x-dts-modify-the-actual-reference-clock-for-sdhci.patch DEBUG util.py:461: 0135-k1pro-cpuidle-support-cpu0-cluster0-go-deepidle.patch DEBUG util.py:461: 0136-cpuidle-adapt-code-for-CPUidle-functionality.patch DEBUG util.py:461: 0137-update-k1x-vpu-driver.patch DEBUG util.py:461: 0138-k1x-cpuidle-synchronize-relevant-patches-from-k1pro.patch DEBUG util.py:461: 0139-k1x-support-cpufreq-driver.patch DEBUG util.py:461: 0140-reset-add-reset-controller-driver-for-k1x.patch DEBUG util.py:461: 0141-clock-add-clock-controller-driver-for-k1x.patch DEBUG util.py:461: 0142-dts-fix-worng-and-warning-for-k1x-clk-reset.patch DEBUG util.py:461: 0143-clock-fix-k1x-clock-id.patch DEBUG util.py:461: 0144-pinctrl-adding-pinctrl-config-for-k1x-soc.patch DEBUG util.py:461: 0145-reset-modify-reset-driver-file-name-of-k1pro.patch DEBUG util.py:461: 0146-clock-modify-clock-driver-file-name-of-k1pro.patch DEBUG util.py:461: 0147-pm_domain-move-the-pm_domain-driver-to-the-directy-s.patch DEBUG util.py:461: 0148-v2d-Add-v2d-driver.patch DEBUG util.py:461: 0149-add-tcm_cfg_save-restore.patch DEBUG util.py:461: 0150-add-tcm-sync-malloc-code-clean.patch DEBUG util.py:461: 0151-update-k1-x_fpga.dts-with-device-k1-x-board.dts.patch DEBUG util.py:461: 0152-mmc-sdhci-of-k1x-support-configure-reset-and-clk-fro.patch DEBUG util.py:461: 0153-usb-add-reset-and-clk-configurations.patch DEBUG util.py:461: 0154-pinctrl-supports-the-allocation-of-GPIOs-with-the-sa.patch DEBUG util.py:461: 0155-pcie-update-the-operations-of-clk-and-reset.patch DEBUG util.py:461: 0156-display-Add-spacemit-drm-driver.patch DEBUG util.py:461: 0157-gpu-Add-spacemit-gpu-driver.patch DEBUG util.py:461: 0158-gpio-update-the-operation-of-clk-for-gpio.patch DEBUG util.py:461: 0159-pmic-add-the-first-version-of-pmic-driver.patch DEBUG util.py:461: 0160-pmic-spm8821-pinctrl-first-version-to-support-pinctr.patch DEBUG util.py:461: 0161-fix-some-warning-when-building-dts.patch DEBUG util.py:461: 0162-add-configurations-for-k1-x-evb-board.patch DEBUG util.py:461: 0163-ethernet-update-driver-of-k1x-emac-driver.patch DEBUG util.py:461: 0164-pm-domain-correction-of-previous-driver-errors-and-a.patch DEBUG util.py:461: 0165-add-ranges-property-for-some-nodes-which-contain-som.patch DEBUG util.py:461: 0166-qspi-update-the-opertions-of-clk-and-reset-for-k1x-q.patch DEBUG util.py:461: 0167-pm_domain-improve-the-execution-process-of-this-driv.patch DEBUG util.py:461: 0168-pm_domain-move-the-pm-domain-dts-node-to-k1-x.dtsi-f.patch DEBUG util.py:461: 0169-gpu-Compatible-with-gpu-umd-driver.patch DEBUG util.py:461: 0170-camera-init-version-of-camera-driver-on-k1.patch DEBUG util.py:461: 0171-display-Add-spacemit-drm-debugfs-node.patch DEBUG util.py:461: 0172-k1x-dma-add-clk-reset-control-in-dma-driver.patch DEBUG util.py:461: 0173-qspi-adding-resets-for-k1-x-qspi.patch DEBUG util.py:461: 0174-fix-cpu-node-properties-defined-by-linux-6.x.y.patch DEBUG util.py:461: 0175-spi-add-the-driver-for-k1x-spi-controller.patch DEBUG util.py:461: 0176-pmic-pm853-support-regulator-driver-and-compatible-w.patch DEBUG util.py:461: 0177-k1x-uart-add-clock-reset-in-uart-driver.patch DEBUG util.py:461: 0178-clock-fix-clock-driver-issues-of-k1x.patch DEBUG util.py:461: 0179-pm-domain-add-new-feature.patch DEBUG util.py:461: 0180-update-dts-for-support-i2c0.patch DEBUG util.py:461: 0181-k1x-pwm-driver-adds-clk-reset-control.patch DEBUG util.py:461: 0182-update-kconfig-to-support-spacemit-k1x-timer-configu.patch DEBUG util.py:461: 0183-fix-uart-board-configuration-for-asic.patch DEBUG util.py:461: 0184-clock-reset-fix-pwm-clk-reset-reg-bit.patch DEBUG util.py:461: 0185-pm853-support-the-regulator-func-in-asic.patch DEBUG util.py:461: 0186-pmic-open-the-configuration-of-pmic-driver.patch DEBUG util.py:461: 0187-update-dts-for-i2c-to-support-clk-operation.patch DEBUG util.py:461: 0188-k1x-i2c-driver-add-clk-reset.patch DEBUG util.py:461: 0189-k1x-pm-domain-add-gnss-domain.patch DEBUG util.py:461: 0190-gmac-modify-the-config-for-k1x-gmac-controller.patch DEBUG util.py:461: 0191-usb-udc-k1x_udc-fix-udc-disconnect.patch DEBUG util.py:461: 0192-k1x-usb-fix-reset-and-clk-configuration.patch DEBUG util.py:461: 0193-update-evb-board-dts.patch DEBUG util.py:461: 0194-remove-some-unused-kernel-module.patch DEBUG util.py:461: 0195-k1-x-pinctrl-add-fast-config-for-sdcard.patch DEBUG util.py:461: 0196-update-board-dts-for-evb-and-fpga-boards.patch DEBUG util.py:461: 0197-display-Add-lcd-gc9503v_mipi.patch DEBUG util.py:461: 0198-support-jpu-driver-for-k1x.patch DEBUG util.py:461: 0199-clock-fix-the-result-of-set_rate-is-not-the-closest-.patch DEBUG util.py:461: 0200-clock-enable-some-clocks.patch DEBUG util.py:461: 0201-remove-clint-timer.patch DEBUG util.py:461: 0202-update-dtsi-for-k1-x-platform.patch DEBUG util.py:461: 0203-config-adding-spacemit-k1x-spi-driver.patch DEBUG util.py:461: 0204-qspi-fix-the-bus_num-for-k1x-qspi-controller.patch DEBUG util.py:461: 0205-k1x-vpu-update-driver.patch DEBUG util.py:461: 0206-k1x-dtsi-linlon-vpu-update-config.patch DEBUG util.py:461: 0207-usb-k1x_udc-deassert-reset-before-phy-init.patch DEBUG util.py:461: 0208-k1x-dma-1.add-pm-func-in-dma-driver-2.modify-dma-Kco.patch DEBUG util.py:461: 0209-k1x-uart-driver-add-pm-func.patch DEBUG util.py:461: 0210-k1x-i2c-driver-add-pm-domains-revision.patch DEBUG util.py:461: 0211-qspi-support-pm-runtime-for-qspi-driver.patch DEBUG util.py:461: 0212-dts-adding-power-domains-for-k1x-qspi.patch DEBUG util.py:461: 0213-k1x-pm-open-the-configuration-of-pm-domain-driver.patch DEBUG util.py:461: 0214-k1x-dtsi-jpu-update-config.patch DEBUG util.py:461: 0215-k1x-evb-defconfig-enable-CHIP_MEDIA_JPU.patch DEBUG util.py:461: 0216-add-some-debug-configuration.patch DEBUG util.py:461: 0217-feat-gpu-Support-gpu-for-k1x-evb-board.patch DEBUG util.py:461: 0218-mmc-k1x-add-host-capability-MMC_CAP_NEED_RSP_BUSY.patch DEBUG util.py:461: 0219-k1x-dtsi-jpu-add-reset-config.patch DEBUG util.py:461: 0220-k1x-uart-add-reference-to-pm-domain.patch DEBUG util.py:461: 0221-k1x-dma-add-reference-to-pm-domain.patch DEBUG util.py:461: 0222-k1x-cpufreq-support-cpufreq-function.patch DEBUG util.py:461: 0223-usb-phy-k1x-ci-usb2-update-phy-init-parameters-fix-h.patch DEBUG util.py:461: 0224-usb-ehci-add-support-for-k1-x-ehci-driver.patch DEBUG util.py:461: 0225-dts-k1-x-add-ehci-usb-host-support.patch DEBUG util.py:461: 0226-config-enable-k1x-ehci-host-driver.patch DEBUG util.py:461: 0227-update-evb-board-dts.patch DEBUG util.py:461: 0228-disable-cpufreq-it-will-crash-kernel.patch DEBUG util.py:461: 0229-config-k1-x-enable-more-usb-functions.patch DEBUG util.py:461: 0230-clock-fix-camm2-no-clock-issue-change-enable-bit.patch DEBUG util.py:461: 0231-clock-fix-set_rate-function-it-change-rate-by-div-an.patch DEBUG util.py:461: 0232-clock-enable-some-clocks-for-cpu-remove-cpu-core-clk.patch DEBUG util.py:461: 0233-k1x-cpufreq-don-t-need-to-set-parent-when-set-the-fr.patch DEBUG util.py:461: 0234-display-Support-lcd-icnl9911c-mipi.patch DEBUG util.py:461: 0235-sync-dts-with-device-board.dts.patch DEBUG util.py:461: 0236-usb-hid-enable-raw-HID-device-support.patch DEBUG util.py:461: 0237-clock-fix-qspi_clk-issue-only-set-fc-bit-when-settin.patch DEBUG util.py:461: 0238-k1x-pm-domain-change-the-log-level-of-debug-info.patch DEBUG util.py:461: 0239-display-fix-dpu-reset-control.patch DEBUG util.py:461: 0240-config-k1x-enable-usb-webcam-support.patch DEBUG util.py:461: 0241-k1x-add-watchdog-driver-support.patch DEBUG util.py:461: 0242-k1x-add-reboot-with-args-support.patch DEBUG util.py:461: 0243-fix-gpu-move-loading-firmware-later.patch DEBUG util.py:461: 0244-k1x-spacemit-timer-driver-add-clk-reset-interface.patch DEBUG util.py:461: 0245-k1x-timer-clk-reset-dts-config.patch DEBUG util.py:461: 0246-mmc-sdhci-of-k1x-add-quirks2-SDHCI_QUIRK2_BROKEN_64_.patch DEBUG util.py:461: 0247-reserved-2GB-4GB-area-from-memory-space-it-should-be.patch DEBUG util.py:461: 0248-k1x-pm_domain-using-hw-mode-to-power-on-off-audio-s-.patch DEBUG util.py:461: 0249-k1x-add-k1x-soc-rtc-driver-and-clk-reset-interface.patch DEBUG util.py:461: 0250-sync-evb-board-dts-from-device-k1x-evb-board.dts.patch DEBUG util.py:461: 0251-clean-compile-warning-in-arch-riscv-mm-init.c.patch DEBUG util.py:461: 0252-clean-compile-warning-in-display-driver.patch DEBUG util.py:461: 0253-clean-compile-warning-in-pcie-driver.patch DEBUG util.py:461: 0254-k1x-wdt-update-watchdog-driver.patch DEBUG util.py:461: 0255-clock-twsi8-clk-reset-reg-is-write-only-don-t-read-i.patch DEBUG util.py:461: 0256-k1x-reboot-fix-reboot-into-fastboot-mode-with-no-arg.patch DEBUG util.py:461: 0257-add-pwm-control-backlight.patch DEBUG util.py:461: 0258-k1x-pinctrl.dtsi-fix-some-pinctrl-error.patch DEBUG util.py:461: 0259-k1x-update-DTS-automatically-based-on-env.patch DEBUG util.py:461: 0260-mmc-sdhci-of-k1x-update-sdio-scan-interface.patch DEBUG util.py:461: 0261-add-tcm_override_readl-writel-for-access-tcm-overrid.patch DEBUG util.py:461: 0262-k1x-unique-mac-address-in-eeprom.patch DEBUG util.py:461: 0263-modify-compile-optimize-from-O2-to-Os.patch DEBUG util.py:461: 0264-clean-compile-waring-in-vpu-driver.patch DEBUG util.py:461: 0265-dts-add-apbc2-reg-base-for-clock-and-reset.patch DEBUG util.py:461: 0266-clock-add-apbc2-reg-base-clocks.patch DEBUG util.py:461: 0267-reset-add-apb2-reg-base-resets.patch DEBUG util.py:461: 0268-clock-add-CLK_IGNORE_UNUSED-flag-for-some-clocks.patch DEBUG util.py:461: 0269-vpu-can-use-when-RAM-2GB.patch DEBUG util.py:461: 0270-support-non-uniform-address-mapping-between-peripher.patch DEBUG util.py:461: 0271-add-nfsd-support.patch DEBUG util.py:461: 0272-add-exfat-fs-support.patch DEBUG util.py:461: 0273-add-xfs-support.patch DEBUG util.py:461: 0274-add-btrfs-support.patch DEBUG util.py:461: 0275-add-f2fs-support.patch DEBUG util.py:461: 0276-add-quota-used-by-ext4-support.patch DEBUG util.py:461: 0277-add-device-mapper-used-by-RAID-and-FS-crypto.patch DEBUG util.py:461: 0278-add-bridge-and-vlan-support-used-by-docker-vm.patch DEBUG util.py:461: 0279-add-ipv6-support.patch DEBUG util.py:461: 0280-add-ntfs-v3.1-same-with-win10-s-native-fs-support.patch DEBUG util.py:461: 0281-yk1x-thermal-support-thermal-driver.patch DEBUG util.py:461: 0282-k1x-dma-close-some-unnecessary-config.patch DEBUG util.py:461: 0283-k1x-dma-range-add-a-driver-for-devices-node-dram_ran.patch DEBUG util.py:461: 0284-k1x-dma-fix-compile-error-in-include-k1x-dmac.h.-def.patch DEBUG util.py:461: 0285-k1x-support-aes-crypto-engine.patch DEBUG util.py:461: 0286-k1x-kernel-support-afalg-engine.patch DEBUG util.py:461: 0287-support-camera-to-draw-when-use-2GB-DDR-dtsi-and-def.patch DEBUG util.py:461: 0288-clear-compile-warning.patch DEBUG util.py:461: 0289-clear-compile-warning.patch DEBUG util.py:461: 0290-sync-evb-board.dts-from-devices-k1x-evb.patch DEBUG util.py:461: 0291-camera-self-managed-ldo.patch DEBUG util.py:461: 0292-k1x-pm-domain-add-hdmi-domiain.patch DEBUG util.py:461: 0293-v2d-support-use-memory-2GB.patch DEBUG util.py:461: 0294-k1x-pmic-refine-some-code.patch DEBUG util.py:461: 0295-support-camera-to-draw-when-use-4GB-DDR.patch DEBUG util.py:461: 0296-display-phy-driver-has-been-registered-in-another-fu.patch DEBUG util.py:461: 0297-pci-add-initialization-phy-of-pcie-for-k1x.patch DEBUG util.py:461: 0298-k1x-pm-domain-the-IO-size-too-small-to-cover-the-HDM.patch DEBUG util.py:461: 0299-pcie-adding-dram_range1-for-pcie0-pcie1-pci2.patch DEBUG util.py:461: 0300-add-dts-and-config-for-deb2-board.patch DEBUG util.py:461: 0301-display-Support-spacemit-hdmi-driver.patch DEBUG util.py:461: 0302-target-add-task-management-values-and-overlapped-res.patch DEBUG util.py:461: 0303-usb-f_tcm-support-mutltiple-cmds-enhance-performance.patch DEBUG util.py:461: 0304-k1x-support-reboot-to-uboot-shell.patch DEBUG util.py:461: 0305-sync-evb-deb2-board-dts-from-devices.patch DEBUG util.py:461: 0306-fix-cpp-clk-timeout.patch DEBUG util.py:461: 0307-fix-gpu-memory-leak-when-launch-weston.patch DEBUG util.py:461: 0308-k1x-cpufreq-support-adjust-the-ace-tcm-s-frequency-a.patch DEBUG util.py:461: 0309-fix-dead-lock-bug-between-reset-and-clk.patch DEBUG util.py:461: 0310-k1x-cpu-cooling-support-cpu-cooling-device.patch DEBUG util.py:461: 0311-extcon-add-extcon-k1xci-driver-for-usb2.0-otg.patch DEBUG util.py:461: 0312-usb-otg-add-k1x-ci-otg-driver.patch DEBUG util.py:461: 0313-dtsi-k1-x-add-usb2-otg-support.patch DEBUG util.py:461: 0314-clock-add-apb-clk-enable-apb-axi-clk-when-init.patch DEBUG util.py:461: 0315-k1x-pmic-refine-the-pmic-code.patch DEBUG util.py:461: 0316-display-Support-hdmi-1080p.patch DEBUG util.py:461: 0317-clock-dead-lock-issue-may-happen.patch DEBUG util.py:461: 0318-mmc-dts-support-power-domain.patch DEBUG util.py:461: 0319-mmc-sdhci-of-k1x-add-pm_runtime_get_sync-during-prob.patch DEBUG util.py:461: 0320-pcie-Optimize-phy-initialization-code-for-k1x-pcie-d.patch DEBUG util.py:461: 0321-dts-modify-the-domain-id-of-pcie1-to-1.patch DEBUG util.py:461: 0322-k1x-pmic-support-power-key-driver.patch DEBUG util.py:461: 0323-k1x-pmic-rtc-support-spm8821-rtc-driver.patch DEBUG util.py:461: 0324-reshape-pinctrl-dtsi-and-platform-dtsi.patch DEBUG util.py:461: 0325-display-Fix-reset-control-deassert-and-assert.patch DEBUG util.py:461: 0326-clean-clk-driver-debug-info.patch DEBUG util.py:461: 0327-clean-drm-driver-debug-info.patch DEBUG util.py:461: 0328-clean-camera-driver-debug-info.patch DEBUG util.py:461: 0329-clean-dma-driver-debug-info.patch DEBUG util.py:461: 0330-clean-usb-driver-debug-info.patch DEBUG util.py:461: 0331-clean-tcm-driver-debug-info.patch DEBUG util.py:461: 0332-clean-qspi-driver-debug-info.patch DEBUG util.py:461: 0333-clean-crypto-driver-debug-info.patch DEBUG util.py:461: 0334-clean-i2c-driver-debug-info.patch DEBUG util.py:461: 0335-clean-reset-driver-debug-info.patch DEBUG util.py:461: 0336-clean-gmac-driver-debug-info.patch DEBUG util.py:461: 0337-clean-some-unused-driver-module.patch DEBUG util.py:461: 0338-add-gx09inx101-mipi-lcd-configuration.patch DEBUG util.py:461: 0339-k1x-crypto-1.handle-memleak-in-probe-2.ture-down-sel.patch DEBUG util.py:461: 0340-k1x-pmic-refactoring-code-to-support-new-dcdc.patch DEBUG util.py:461: 0341-defconfig-add-usb3.0-support-for-k1-x-evb2.patch DEBUG util.py:461: 0342-usb-misc-add-spacemit-onboard-hub-driver.patch DEBUG util.py:461: 0343-dtsi-k1-x-add-usb3.0-support.patch DEBUG util.py:461: 0344-usb-add-spacemit-k1x-dma-mask-setting.patch DEBUG util.py:461: 0345-phy-add-spacemit-pcie-usb3-combphy-driver.patch DEBUG util.py:461: 0346-spacemit-rf-add-wifi-platform-driver.patch DEBUG util.py:461: 0347-spacemit-rf-dts-enable-spacemit-rf-pwrseq.patch DEBUG util.py:461: 0348-k1x-cpuidle-support-cpu-power-down-only.patch DEBUG util.py:461: 0349-wireless-rtl8852bs-add-rtl8852bs-sdio-wifi-driver.patch DEBUG util.py:461: 0350-wifi-k1x-deb2-enable-rtl8852bs-wifi-defconfig.patch DEBUG util.py:461: 0351-k1x-cpufreq-support-adjust-the-voltage-when-the-cpu-.patch DEBUG util.py:461: 0352-display-Fix-hdmi-qos-control.patch DEBUG util.py:461: 0353-mmc-dts-alloc-index-from-alias-id.patch DEBUG util.py:461: 0354-disable-rtl8852bs-wifi-driver-there-is-too-much-warn.patch DEBUG util.py:461: 0355-update-evb-board-dts.patch DEBUG util.py:461: 0356-update-deb2-board-dts.patch DEBUG util.py:461: 0357-update-deb2-kernel-config.patch DEBUG util.py:461: 0358-sync-deb2-board-dts.patch DEBUG util.py:461: 0359-wifi-k1x-deb2-enable-aic8800dc-wifi-defconfig.patch DEBUG util.py:461: 0360-wifi-k1x-evb-enable-aic8800dc-wifi-defconfig.patch DEBUG util.py:461: 0361-audio-add-audio-driver.patch DEBUG util.py:461: 0362-dts-add-audio-snd-card-support.patch DEBUG util.py:461: 0363-enable-audio-driver-for-evb-board.patch DEBUG util.py:461: 0364-enable-audio-driver-for-deb2.patch DEBUG util.py:461: 0365-clear-compile-warning.patch DEBUG util.py:461: 0366-support-dvfs-for-evb-performance.patch DEBUG util.py:461: 0367-use-performance-governor-as-default.patch DEBUG util.py:461: 0368-audio-change-pcm-hw_params.patch DEBUG util.py:461: 0369-display-Support-kernel-logo.patch DEBUG util.py:461: 0370-display-update-kernel-logo.patch DEBUG util.py:461: 0371-disable-audio-and-adsp-driver.patch DEBUG util.py:461: 0372-disable-audio-and-adsp-driver.patch DEBUG util.py:461: 0373-display-fix-kernel-logo.patch DEBUG util.py:461: 0374-k1x-can-add-clk-reset-control-in-dma-driver.patch DEBUG util.py:461: 0375-clock-fix-can-func-clk-incorrect-issue.patch DEBUG util.py:461: 0376-reset-fix-reset-bit-of-aes.patch DEBUG util.py:461: 0377-k1x-deb1-support-deb1-project.patch DEBUG util.py:461: 0378-k1x-deb1-add-k1-x_deb1.dts-to-fix-compiling-error-wh.patch DEBUG util.py:461: 0379-k1x-pmic-support-pwr-key-rtc-pinctrl-function.patch DEBUG util.py:461: 0380-spacemit-rf-add-bluetooth-platform-driver.patch DEBUG util.py:461: 0381-wifi-k1x-deb2-enable-rtl8852bs-wifi-defconfig.patch DEBUG util.py:461: 0382-sync-board-dts-from-devices.patch DEBUG util.py:461: 0383-add-k1-universal-config-for-all-board.patch DEBUG util.py:461: 0384-fix-disable-CONFIG_INITRAMFS_SOURCE-which-may-overla.patch DEBUG util.py:461: 0385-wifi-k1x-deb1-enable-rtl8852bs-wifi-defconfig.patch DEBUG util.py:461: 0386-k1-x-crypto-speed-up-expand-single-encrypt-decrypt-s.patch DEBUG util.py:461: 0387-sync-board-dts-from-devices.patch DEBUG util.py:461: 0388-wireless-rtl8852be-add-wifi-driver.patch DEBUG util.py:461: 0389-k1x-cpu-cooling-add-the-cpuidle-cooling-function.patch DEBUG util.py:461: 0390-clock-reset-fix-pwm0-clk-reset-reg-bit.patch DEBUG util.py:461: 0391-add-cpu-model-name-showed-in-proc-cpuinfo.patch DEBUG util.py:461: 0392-k1x-adjust-i2c-driver-strength.patch DEBUG util.py:461: 0393-add-docker-required-configurations-1.-bridge-and-vla.patch DEBUG util.py:461: 0394-k1x-deb1-support-power-off-system.patch DEBUG util.py:461: 0395-display-Fix-dpu-reset-issue.patch DEBUG util.py:461: 0396-sync-board-dts-from-devices.patch DEBUG util.py:461: 0397-tools-perf-pmu-events-add-SpacemiT-X60-JSON-files.patch DEBUG util.py:461: 0398-k1x-add-zicboz-and-zicbop-to-dts.patch DEBUG util.py:461: 0399-modify-compile-optimize-from-size-to-performance.patch DEBUG util.py:461: 0400-display-disable-kernel-logo.patch DEBUG util.py:461: 0401-set-cma-alloc-range-from-0x40000000.patch DEBUG util.py:461: 0402-sync-board-dts-from-devices-configuration.patch DEBUG util.py:461: 0403-qspi-Correct-the-setting-clk-rate-of-k1x-qspi.patch DEBUG util.py:461: 0404-performance-optimize.patch DEBUG util.py:461: 0405-k1x-support-PCIE-SATA-JMB585-board.patch DEBUG util.py:461: 0406-Bluetooth-enable-bluez-stack.patch DEBUG util.py:461: 0407-uart-disable-bluesleep-hostwake-detect.patch DEBUG util.py:461: 0408-clock-uart-source-48M-and-14.7M-have-same-gate-bit-i.patch DEBUG util.py:461: 0409-k1x-uart-add-uart-parent-clk-gate-function.patch DEBUG util.py:461: 0410-sync-board-dts-with-devices.patch DEBUG util.py:461: 0411-display-Update-hdmi-phy-config.patch DEBUG util.py:461: 0412-k1-x-aes-prevent-writing-buffer-requests-in-the-mean.patch DEBUG util.py:461: 0413-k1x-aes-add-xts-cipher.patch DEBUG util.py:461: 0414-display-Support-dsi-and-hdmi-double-screens.patch DEBUG util.py:461: 0415-use-the-unified-defconfig-for-k1-5-5.patch DEBUG util.py:461: 0416-add-ramdisk-for-develop-branch.patch DEBUG util.py:461: 0417-k1-enable-usb-serial.patch DEBUG util.py:461: 0418-mmc-sdhci-of-k1x-improve-the-sd-tuning-process.patch DEBUG util.py:461: 0419-scatterlist-mask-out-GFP_DMA32-flag-when-call-kmallo.patch DEBUG util.py:461: 0420-target-alloc-scatterlist-with-GFP_DMA32-flag-on-spac.patch DEBUG util.py:461: 0421-k1-x-enable-ehci-for-deb1-and-deb2.patch DEBUG util.py:461: 0422-display-Remove-error-logs.patch DEBUG util.py:461: 0423-k1x-support-mailbox-driver.patch DEBUG util.py:461: 0424-k1x-remoteproc-support-remoteproc-driver.patch DEBUG util.py:461: 0425-k1x-rproc-launching-rcpu-during-the-system-startup-p.patch DEBUG util.py:461: 0426-k1x-defconfig-enable-mailbox-rproc-rpmsg_virtio-defc.patch DEBUG util.py:461: 0427-k1-rcpu-ipc-reserved-memory-for-rcpu-and-ipc.patch DEBUG util.py:461: 0428-k1x-adma-add-adma-driver-for-sspa.patch DEBUG util.py:461: 0429-audio-add-hdmi-audio-driver-and-remove-unused-code.patch DEBUG util.py:461: 0430-deconfig-enable-sound-support.patch DEBUG util.py:461: 0431-dts-add-hdmi-audio-config.patch DEBUG util.py:461: 0432-dts-modify-audio-config.patch DEBUG util.py:461: 0433-k1x-rporc-add-the-reference-of-mailbox-memory-region.patch DEBUG util.py:461: 0434-audio-modify-hdmi-audio-params-set-enable-ctrl-reg.patch DEBUG util.py:461: 0435-k1-support-CTP-driver.patch DEBUG util.py:461: 0436-display-Fixed-dtsi-warning.patch DEBUG util.py:461: 0437-dtb-adding-the-dts-of-linux-for-hs450-board.patch DEBUG util.py:461: 0438-k1-defconfig-enable-support-for-r8152.patch DEBUG util.py:461: 0439-disp-adjust-gpu-and-drm-initcall-sequence-for-fixed-.patch DEBUG util.py:461: 0440-gitignore-add-user_headers-generated-by-openwrt-to-g.patch DEBUG util.py:461: 0441-k1x-snd-fix-compile-warning-in-spacemit-snd-card.c.patch DEBUG util.py:461: 0442-img-rogue-fix-compile-warning.patch DEBUG util.py:461: 0443-k1x-display-fix-compile-warning.patch DEBUG util.py:461: 0444-gt9xx-fix-compile-warning.patch DEBUG util.py:461: 0445-eeprom-at24-fix-compile-warning.patch DEBUG util.py:461: 0446-k1x-hdmi-fix-compile-warning-because-of-unused-varia.patch DEBUG util.py:461: 0447-brtfs-fix-compile-warning.patch DEBUG util.py:461: 0448-sync-camera-code-from-Release-JINDIE-V3.8.patch DEBUG util.py:461: 0449-sync-camera-code-from-Release-JINDIE-V4.0.patch DEBUG util.py:461: 0450-mmc-sdhci-of-k1x-update-phy-dll-config.patch DEBUG util.py:461: 0451-aud-modify-hdmi-audio-period_size-fix-coding-issue.patch DEBUG util.py:461: 0452-k1-gpio-support-irq-controller-mode.patch DEBUG util.py:461: 0453-k1-open-hid-configs.patch DEBUG util.py:461: 0454-k1-support-touchpad-for-hs450-board.patch DEBUG util.py:461: 0455-aud-add-spi-i2s-driver.patch DEBUG util.py:461: 0456-dts-add-i2s-support.patch DEBUG util.py:461: 0457-dts-add-codec-es8326-support-i2s-pin-config.patch DEBUG util.py:461: 0458-config-enable-codec-es8326.patch DEBUG util.py:461: 0459-aud-add-es8326-sound-card-support.patch DEBUG util.py:461: 0460-k1_defconfig-enable-USB_NET_QMI_WWAN.patch DEBUG util.py:461: 0461-udma-open-failed-when-dma_dev-NULL.patch DEBUG util.py:461: 0462-k1x-dma-support-console-tx-rx-dma-mode.patch DEBUG util.py:461: 0463-dtb-adding-the-dts-of-linux-for-kx312-board.patch DEBUG util.py:461: 0464-Bluetooth-defconfig-support-hid-and-pan-profile.patch DEBUG util.py:461: 0465-gmac-Modify-gmac-pin-configuration-in-order-to-impro.patch DEBUG util.py:461: 0466-usb-misc-spacemit_onboard_hub-use-gpio-array.patch DEBUG util.py:461: 0467-dts-k1-x_kx312-enable-usbdrd3-and-usb3hub.patch DEBUG util.py:461: 0468-dtb-adding-the-dts-of-linux-for-MINI-PC-board.patch DEBUG util.py:461: 0469-add-kernel-image-itb-build-support.patch DEBUG util.py:461: 0470-perfect-camera-dts-gpio-config.patch DEBUG util.py:461: 0471-display-Fix-dpu-irqs-timeout.patch DEBUG util.py:461: 0472-k1-align-initial-state-for-audio.patch DEBUG util.py:461: 0473-k1-rpoc-using-a-RT-thread-to-process-the-virtio-msg.patch DEBUG util.py:461: 0474-k1-delete-undefined-pm-function.patch DEBUG util.py:461: 0475-dtb-adding-the-dts-of-linux-for-mingo-board.patch DEBUG util.py:461: 0476-kx312-fix-the-compile-error-that-it-can-t-find-dpu_o.patch DEBUG util.py:461: 0477-k1x-uart-fix-uart9-dts-config.patch DEBUG util.py:461: 0478-k1x-serial-fix-bug-of-pm-runtime-feature.patch DEBUG util.py:461: 0479-k1x-system_suspend-support-pmic-wakeup-source.patch DEBUG util.py:461: 0480-mmc-sdhci-of-k1x-optimize-sdcard-tuning-procedure.patch DEBUG util.py:461: 0481-k1-dts-update-dts.patch DEBUG util.py:461: 0482-vpu-update-vpu-driver-version-to-Release-JINDIE-V4.2.patch DEBUG util.py:461: 0483-v2d-mv-v2d-from-drivers-media-platform-spacemit-v2d-.patch DEBUG util.py:461: 0484-add-kernel-image-offset-configuration-which-would-be.patch DEBUG util.py:461: 0485-more-flexable-configuration-for-image-itb-build.patch DEBUG util.py:461: 0486-k1x-dts-enable-sdio-sdr104-mode.patch DEBUG util.py:461: 0487-mmc-sdhci-of-k1x-support-disable-caps.patch DEBUG util.py:461: 0488-add-compressed-gzip-kernel-itb-build.patch DEBUG util.py:461: 0489-k1-dts-disable-mipi-dsi-for-deb1.patch DEBUG util.py:461: 0490-display-Fix-dpu-irqs-error.patch DEBUG util.py:461: 0491-arch-riscv-Changed-default-target-to-Image.gz.itb-wh.patch DEBUG util.py:461: 0492-update-evb-dts.patch DEBUG util.py:461: 0493-display-add-hdmi-edid.patch DEBUG util.py:461: 0494-dts-dpu_reserved-move-dpu-reserved-memory-to-0x2ff40.patch DEBUG util.py:461: 0495-wireless-build-rtl8852be-module-into-kernel.patch DEBUG util.py:461: 0496-aud-limit-i2s-audio-params.patch DEBUG util.py:461: 0497-dts-config-codec-snd-card-support.patch DEBUG util.py:461: 0498-k1-system_suspend-enable-cpuidle-configuration-for-s.patch DEBUG util.py:461: 0499-k1-dma-add-suspend-resume-callback-for-dma-module.patch DEBUG util.py:461: 0500-display-Fix-read-hdmi-edid-data-error.patch DEBUG util.py:461: 0501-vpu-sync-Release-JINDIE-V4.3.1-on-2024-03-19-06-08.patch DEBUG util.py:461: 0502-mmc-sdhci-of-k1x-avoid-scan-sdio-during-start-host.patch DEBUG util.py:461: 0503-k1-cpufreq-fix-bug-that-the-system-do-not-update-the.patch DEBUG util.py:461: 0504-k1-cpu_cooling_device-add-the-mechanism-for-cpu-cool.patch DEBUG util.py:461: 0505-k1-cpu_cooling-add-the-function-that-hotpluging-core.patch DEBUG util.py:461: 0506-k1-thermal-enable-cpufreq-cooling-device.patch DEBUG util.py:461: 0507-mmc-sdhci-of-k1x-improve-the-tuning-window-select.patch DEBUG util.py:461: 0508-k1x-adjust-i2s-driver-strength.patch DEBUG util.py:461: 0509-dts-config-es8326-ADC-src-to-dmic.patch DEBUG util.py:461: 0510-eth-changing-the-dma-range-and-setting-dma-coherent-.patch DEBUG util.py:461: 0511-display-Fix-hdmi-read-edid-data-code-error.patch DEBUG util.py:461: 0512-phy-spacemit-k1x-combphy-get-shared-reset.patch DEBUG util.py:461: 0513-MINIPC-fix-pcie2-lane-config.patch DEBUG util.py:461: 0514-k1x-dts-update-mmc-tuning-config.patch DEBUG util.py:461: 0515-aud-fix-i2s-capture-issue.patch DEBUG util.py:461: 0516-mmc-sdhci-of-k1x-add-tx-delaycode-attr-for-sd-sdio.patch DEBUG util.py:461: 0517-leds-Support-hearbeat.patch DEBUG util.py:461: 0518-phy-k1x-ci-usb2-add-notify-callbacks-remove-unused-c.patch DEBUG util.py:461: 0519-usb-xhci-fix-spacemit-k1x-phy-disconnect-detect.patch DEBUG util.py:461: 0520-phy-spacemit-k1x-combphy-don-t-assert-when-use-share.patch DEBUG util.py:461: 0521-eth-change-the-range-of-dma-to-range1.patch DEBUG util.py:461: 0522-eth-improve-the-through-of-gmac.patch DEBUG util.py:461: 0523-display-Modify-hdmi-and-mipi-dsi-qos.patch DEBUG util.py:461: 0524-k1-kx312-add-touchpad-dts.patch DEBUG util.py:461: 0525-kx312-enable-es8326-sound-card-support.patch DEBUG util.py:461: 0526-clk-add-pll2-support-2800MHz.patch DEBUG util.py:461: 0527-eth-change-the-num-of-tx-rx-desc-buffer-to-1024-for-.patch DEBUG util.py:461: 0528-k1-sys-reboot-using-the-reset-function-of-pmic-rathe.patch DEBUG util.py:461: 0529-display-modify-mipi-dsi-dpu-bit-clock.patch DEBUG util.py:461: 0530-display-support-lt8911exb-driver.patch DEBUG util.py:461: 0531-pcie-getting-the-num-lanes-of-pcie-controller-in-phy.patch DEBUG util.py:461: 0532-pcie-change-the-dma-ranges-of-pcie-to-drma_range2.patch DEBUG util.py:461: 0533-kx312-modify-pcie1-to-1-lane.patch DEBUG util.py:461: 0534-scripts-Added-build_kernel.sh.patch DEBUG util.py:461: 0535-aud-fix-the-first-buffer-data-loss-issue.patch DEBUG util.py:461: 0536-i2s-fix-LR-channel-mapping-incorrect-issue.patch DEBUG util.py:461: 0537-usb-spacemit_onboard_hub-fix-bug-caused-by-no-delay-.patch DEBUG util.py:461: 0538-pcie-change-the-get_reset-method-of-pcie0-to-shared.patch DEBUG util.py:461: 0539-scripts-Fixed-build_kernel.sh-error.patch DEBUG util.py:461: 0540-config-enable-needed-config-checked-by-check-config..patch DEBUG util.py:461: 0541-k1x-i2c-update-i2c-driver.patch DEBUG util.py:461: 0542-display-Support-hdmi-hot-plug-detection.patch DEBUG util.py:461: 0543-display-Fix-pm-runtime-status.patch DEBUG util.py:461: 0544-dts-Enable-kx312-hdmi.patch DEBUG util.py:461: 0545-k1x-wdt-fix-timeout-setting-bug.patch DEBUG util.py:461: 0546-k1-cpufreq-cooling-refine-some-code-for-cpu-cooling.patch DEBUG util.py:461: 0547-plic-clear-irq-pending-when-init-plic.patch DEBUG util.py:461: 0548-k1-i2c-let-the-system-framework-dealing-with-suspend.patch DEBUG util.py:461: 0549-k1-spi-jion-the-pm-domain-framework-to-achieve-power.patch DEBUG util.py:461: 0550-k1-qspi-support-pm-runtime-system-suspend.patch DEBUG util.py:461: 0551-k1-rproc-support-system-suspend-callback-for-rcpu.patch DEBUG util.py:461: 0552-k1x-aes-add-aes-clk-reset-and-suspend-resume-callbac.patch DEBUG util.py:461: 0553-eth-support-suspend-and-resume-for-pm.patch DEBUG util.py:461: 0554-k1x-MINIPC-support-kernel-hdmi.patch DEBUG util.py:461: 0555-k1x-rcpu-support-suspend-resume-function-for-rcpu.patch DEBUG util.py:461: 0556-clock-add-audio-clocks.patch DEBUG util.py:461: 0557-display-Do-not-set-clock-rate-in-dts.patch DEBUG util.py:461: 0558-reset-add-audio-resets.patch DEBUG util.py:461: 0559-hdmiaudio-add-pm-runtime-and-reset.patch DEBUG util.py:461: 0560-i2s-add-pm-runtime-and-suspend-resume.patch DEBUG util.py:461: 0561-vpu-support-suspend-and-resume.patch DEBUG util.py:461: 0562-jpu-support-suspend-and-resume.patch DEBUG util.py:461: 0563-display-Fix-the-minimum-brightness-for-the-lcd.patch DEBUG util.py:461: 0564-vpu-remove-some-unuseful-log.patch DEBUG util.py:461: 0565-dtsi-k1-x-add-interconnects-to-ehci.patch DEBUG util.py:461: 0566-dts-k1-x_MINI-PC-change-usb0-mode-from-udc-to-ehci.patch DEBUG util.py:461: 0567-display-Support-no-edid-panel.patch DEBUG util.py:461: 0568-pcie-support-suspend-and-resume-for-pm.patch DEBUG util.py:461: 0569-dts-k1-x_MINI-PC-add-usb2hub-node.patch DEBUG util.py:461: 0570-k1_defconfig-enable-usb-serial-drivers-as-modules.patch DEBUG util.py:461: 0571-drm-fix-the-buffer-allocation-failed.patch DEBUG util.py:461: 0572-delete-camera-debug-code.patch DEBUG util.py:461: 0573-k1-pmic-increase-initialization-level-for-other-modu.patch DEBUG util.py:461: 0574-MINI-PC-Disable-mipi-dsi.patch DEBUG util.py:461: 0575-fix-gpu_clk-clock-setting-timeout.patch DEBUG util.py:461: 0576-k1_defconfig-change-dummy-device-default-to-module.patch DEBUG util.py:461: 0577-dts-k1-x_deb1-use-PAD_1V8_DS0-for-DVL1-and-GPIO_123.patch DEBUG util.py:461: 0578-dts-adding-module_usrload-for-loading-wifi-driver.patch DEBUG util.py:461: 0579-k1x-pinctrl-adjust-uart2-driver-strength.patch DEBUG util.py:461: 0580-usb-spacemit_onboard_hub-use-devm_gpiod_get_array_op.patch DEBUG util.py:461: 0581-swiotlb-Adjust-the-size-of-swiotlb-to-128M.patch DEBUG util.py:461: 0582-dram_range-change-the-mapping-range-for-dram_range2.patch DEBUG util.py:461: 0583-swiotlb-adjust-the-size-and-segsize-of-io-tlb.patch DEBUG util.py:461: 0584-display-Fix-card-order-for-mipi-dsi-and-hdmi.patch DEBUG util.py:461: 0585-fix-wdt-timeout-setting-use-max-timeout-if-timeout-o.patch DEBUG util.py:461: 0586-mmc-sdhci-of-k1x-add-get-aib-clk-avoid-disable-as-cl.patch DEBUG util.py:461: 0587-clock-fix-emac-ptp-clk-source.patch DEBUG util.py:461: 0588-k1x-rtc-fix-the-bug-that-setting-rtc-time-failed.patch DEBUG util.py:461: 0589-aud-support-snd-card-config-in-dts.patch DEBUG util.py:461: 0590-dts-change-hdmi-es8326-snd-card-config.patch DEBUG util.py:461: 0591-k1x-rproc-fix-bug-of-rproc-driver.patch DEBUG util.py:461: 0592-dtb-adding-the-dts-of-linux-for-MUSE-N1-board.patch DEBUG util.py:461: 0593-clear-compile-warning.patch DEBUG util.py:461: 0594-clean-compile-warning.patch DEBUG util.py:461: 0595-clean-compile-warning.patch DEBUG util.py:461: 0596-clean-compile-warning.patch DEBUG util.py:461: 0597-clear-compile-warning.patch DEBUG util.py:461: 0598-usb-ehci-k1x-ci-support-power-management.patch DEBUG util.py:461: 0599-usb-spacemit_onboard_hub-support-power-management.patch DEBUG util.py:461: 0600-display-Fix-the-issue-caused-by-alloc-pages-failed.patch DEBUG util.py:461: 0601-support-2lane-camera-to-draw-when-okay-frontsensor-n.patch DEBUG util.py:461: 0602-k1-add-kernel-dts-config-for-MUSE-Pi.patch DEBUG util.py:461: 0603-k1-rproc-fix-bug-in-system-shutdown-process.patch DEBUG util.py:461: 0604-spi-fix-the-bug-of-accessing-illegal-pointers-when-t.patch DEBUG util.py:461: 0605-clock-add-rcpu-can-clock.patch DEBUG util.py:461: 0606-reset-add-rcpu-can-reset.patch DEBUG util.py:461: 0607-k1-MUSE-Pi-update-card-detection-logic.patch DEBUG util.py:461: 0608-spi-adding-the-device-node-of-spi2-controller.patch DEBUG util.py:461: 0609-aud-fix-codec-persistent-noise-issue-when-switch-hdm.patch DEBUG util.py:461: 0610-v2d-fix-set-clock-rate-timeout.patch DEBUG util.py:461: 0611-display-fix-hdmi-compatibility-issues.patch DEBUG util.py:461: 0612-Move-GPU-alloc-page-from-DMA32-to-Normal-zone.patch DEBUG util.py:461: 0613-k1-pull-up-gpio70-71-for-SATA.patch DEBUG util.py:461: 0614-k1x-uart-check-uart-dma-function-before-release-uart.patch DEBUG util.py:461: 0615-nvme-change-the-segment-size-of-io-request-queue-for.patch DEBUG util.py:461: 0616-wirless-don-t-show-error-when-load-regulatory.db-fai.patch DEBUG util.py:461: 0617-clock-add-rcpu2-pwm-clock.patch DEBUG util.py:461: 0618-display-fix-dpu-under-run-issues.patch DEBUG util.py:461: 0619-reset-add-rcpu2-pwm-reset.patch DEBUG util.py:461: 0620-i2s-change-log-level.patch DEBUG util.py:461: 0621-display-clear-dpu-irq-and-status-after-bootlogo.patch DEBUG util.py:461: 0622-k1x-support-x60-operate-can-controller-in-rcpu.patch DEBUG util.py:461: 0623-k1x-deb1-support-rpwm2-for-fan.patch DEBUG util.py:461: 0624-dtb-k1-x_MUSE-N1-set-otg-mode-for-dwc3.patch DEBUG util.py:461: 0625-1.increase-command-line-buffer-size-to-2KB.patch DEBUG util.py:461: 0626-k1x-uart3-fix-compatible-error-in-dts.patch DEBUG util.py:461: 0627-k1x-wdt-adjust-reboot-handler-timeout.patch DEBUG util.py:461: 0628-display-add-drm-resume-and-suspend.patch DEBUG util.py:461: 0629-riscv-dts-correct-isa-string-for-Spacemit-K1.patch DEBUG util.py:461: 0630-pcie-modify-suspend_noirq-and-resume_noirq-of-k1-pci.patch DEBUG util.py:461: 0631-k1x-rtc-fix-the-issue-of-probabilistic-failure-on-se.patch DEBUG util.py:461: 0632-dtb-k1-x-update-quirks-for-usbdrd3.patch DEBUG util.py:461: 0633-k1-rtc-fix-stack-out-of-bounds-when-open-KASAN.patch DEBUG util.py:461: 0634-camera-switch-unknow-ioctl-print-level-to-warning.patch DEBUG util.py:461: 0635-Linux-Integrate-Battery-Driver.patch DEBUG util.py:461: 0636-USB-xhci-plat-fix-legacy-PHY-double-init.patch DEBUG util.py:461: 0637-display-add-hdmi-resume-and-suspend.patch DEBUG util.py:461: 0638-display-fix-hdmi-compatibility-issues.patch DEBUG util.py:461: 0639-1.change-license-statement-to-GPL-2.0-WITH-Linux-sys.patch DEBUG util.py:461: 0640-usb-k1x_udc_core-remove-req-from-queue-even-it-s-alr.patch DEBUG util.py:461: 0641-display-fix-build-warning.patch DEBUG util.py:461: 0642-display-fix-hdmi-compatibility-issues.patch DEBUG util.py:461: 0643-pcie-fix-the-compiler-warning.patch DEBUG util.py:461: 0644-aud-fix-hdmi-sound-card-create-fail-issue.patch DEBUG util.py:461: 0645-MUSE-N1-pull-down-GPIO-118-and-119-default-for-toggl.patch DEBUG util.py:461: 0646-add-reboot-mode-select-support-while-P1-reset-will-p.patch DEBUG util.py:461: 0647-aud-fix-global-out-of-bounds-when-open-KASAN.patch DEBUG util.py:461: 0648-k1x_MUSE-Pi-add-spi3-pinctrl-config.patch DEBUG util.py:461: 0649-qspi-fix-the-bug-the-actual-clk-frequency-not-equal-.patch DEBUG util.py:461: 0650-clock-remove-qspi_clk-fc-bit-setting.patch DEBUG util.py:461: 0651-rtc-fix-read-rtc-error-when-the-registers-of-pmic-ar.patch DEBUG util.py:461: 0652-k1-dts-rproc-delete-the-dma-range-property-which-wil.patch DEBUG util.py:461: 0653-pcie-modify-the-enable-phy-function-for-pcie-resume.patch DEBUG util.py:461: 0654-k1-i2c-fix-i2c-irq-mask-when-i2c-transfer-timeout.patch DEBUG util.py:461: 0655-k1-rproc-increase-initialization-level-of-rproc-driv.patch DEBUG util.py:461: 0656-pcie-supporting-the-link-enters-l2-state-when-suspen.patch DEBUG util.py:461: 0657-pcie-Add-a-timeout-to-do-while-to-prevent-an-infinit.patch DEBUG util.py:461: 0658-Linux-Separate-the-I2C-configuration-between-the-boa.patch DEBUG util.py:461: 0659-dts-enable-hdmi-sound-card-for-deb2-MINI-PC.patch DEBUG util.py:461: 0660-k1x-dma-fix-dma-tasklet-schedule-bug.patch DEBUG util.py:461: 0661-Linux-The-integration-of-the-laptop-lid-switch-drive.patch DEBUG util.py:461: 0662-display-fix-dpu-resume-and-suspend-issues.patch DEBUG util.py:461: 0663-1.change-kernel-entry-addr-to-0x20_0000.patch DEBUG util.py:461: 0664-audio-remove-SNDRV_PCM_INFO_PAUSE-support.patch DEBUG util.py:461: 0665-k1-wireless-disable-power-always-on.patch DEBUG util.py:461: 0666-display-modify-lcd-gx09inx101-pixel-clock.patch DEBUG util.py:461: 0667-gpu-fix-failed-to-import-external-image-from-highmem.patch DEBUG util.py:461: 0668-net-usb-add-asix-usb-nic-driver-ver-v3.1.0.patch DEBUG util.py:461: 0669-k1-usb-enable-parkmode_disable_ss_quirk-on-DWC3-cont.patch DEBUG util.py:461: 0670-k1-usb-update-quirks-for-usbdrd3-in-k1-x_MINI-PC.patch DEBUG util.py:461: 0671-k1-use-ax_usb_nic-instead-of-ax88179_178a.patch DEBUG util.py:461: 0672-k1-modify-sdio-rx-dline-configuration.patch DEBUG util.py:461: 0673-audio-fix-hdmiaudio-can-not-playback-after-suspend-r.patch DEBUG util.py:461: 0674-asix_usb-fix-compile-error.patch DEBUG util.py:461: 0675-do_trap_insn_illegal-bind-ai-cores-when-use-ai-instr.patch DEBUG util.py:461: 0676-k1-sync-k1-dtsi-from-linux6.1-dts.patch DEBUG util.py:461: 0677-k1-cpu-fix-compilation-errs.patch DEBUG util.py:461: 0678-k1-ccu-add-determine_rate-func.patch DEBUG util.py:461: 0679-k1-gt9xx-delete-i2c_device_id-args.patch DEBUG util.py:461: 0680-k1-camera-adjust-class_create.patch DEBUG util.py:461: 0681-k1-pmic-delect-i2c_device_id-agrs.patch DEBUG util.py:461: 0682-k1-dma-adjust-vm_flags_set-and-class_create-func.patch DEBUG util.py:461: 0683-k1-gpio-adjust-struct-gpio_chip.fwnode.patch DEBUG util.py:461: 0684-k1-usb-goto-valid-identifier.patch DEBUG util.py:461: 0685-k1-update-k1_defconfig-to-linux-6.6-bringup.patch DEBUG util.py:461: 0686-emac-change-the-function-of-adjusting-hardware-time-.patch DEBUG util.py:461: 0687-display-update-config-for-hdmi-compatibility.patch DEBUG util.py:461: 0688-display-drm-alloc-pages-from-highuser-zone.patch DEBUG util.py:461: 0689-usb-xhci-plat-read-reset-on-resume-from-device-prope.patch DEBUG util.py:461: 0690-usb-ehci-k1x-ci-support-reset-on-resume.patch DEBUG util.py:461: 0691-usb-dwc3-spacemit-add-reset-operation-at-standby-set.patch DEBUG util.py:461: 0692-k1-i2c-fix-i2c-irq-mask-when-i2c-transfer-timout.patch DEBUG util.py:461: 0693-k1-udma-add-pte_unmap-to-avoid-sleeping-function-cal.patch DEBUG util.py:461: 0694-k1-deassert-rpwm-reset-in-resume-ops.patch DEBUG util.py:461: 0695-pcie-change-the-dependence-of-PCI_K1X_HOST-to-PCI_MS.patch DEBUG util.py:461: 0696-k1-rproc-enable-rproc-module-to-avoid-bus-hangs-dead.patch DEBUG util.py:461: 0697-k1-vpu-fix-clk-warning-when-kernel-boot.patch DEBUG util.py:461: 0698-k1-jpu-fix-compile-error-on-6.6.patch DEBUG util.py:461: 0699-k1-jpu-enable-jpu.patch DEBUG util.py:461: 0700-es8326-support-hp-mic-detect-process.patch DEBUG util.py:461: 0701-sound-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0702-pm-rproc-adjusting-the-sleep-process-level-of-rproc.patch DEBUG util.py:461: 0703-pm-regulator-set-the-sleep-voltage-of-DCDC1-to-650mv.patch DEBUG util.py:461: 0704-rproc-do-not-automatically-load-and-start-rcpu.patch DEBUG util.py:461: 0705-k1-pm-domain-fix-error-in-deleting-qos-nodes-when-di.patch DEBUG util.py:461: 0706-k1-pm-set-the-sleep-voltage-of-DCDC1-to-650mv.patch DEBUG util.py:461: 0707-qspi-Fix-the-bug-of-data-transmission-failure-with-a.patch DEBUG util.py:461: 0708-k1_defconfig-build-cdc_ncm-as-module.patch DEBUG util.py:461: 0709-phy-k1x-ci-usb2-update-phy-init-sequence-report-erro.patch DEBUG util.py:461: 0710-usb-dwc3-spacemit-support-phy-setup.patch DEBUG util.py:461: 0711-k1-usb-setup-phy-in-dwc3-spacemit-instead-of-dwc3.patch DEBUG util.py:461: 0712-usb-xhci-add-clear-disconnect-for-spacemit-k1x-phy.patch DEBUG util.py:461: 0713-net-usb-promote-the-priority-of-ax_usb_nic-driver.patch DEBUG util.py:461: 0714-camera-fix-call_get_fmt-EINVAL-return-to-support-dra.patch DEBUG util.py:461: 0715-config-enable-kasan-to-memory-debug.patch DEBUG util.py:461: 0716-k1-ce-fix-ce-compile-errs-and-enable-ce-config.patch DEBUG util.py:461: 0717-gpu-enable-gpu-in-linux6.6.patch DEBUG util.py:461: 0718-spacemit-rf-add-missing-includes.patch DEBUG util.py:461: 0719-k1-enable-RTL8852BS-and-SPACEMIT_RFKILL.patch DEBUG util.py:461: 0720-mmc-sdhci-of-k1x-add-tuning-windows-type-configurati.patch DEBUG util.py:461: 0721-k1-change-sdio-max-clock-frequency-to-187MHz.patch DEBUG util.py:461: 0722-deconfig-enable-aes-engine-to-full-disk-encryption.patch DEBUG util.py:461: 0723-dts-modify-codec-card-name-config-and-add-mclk_fs-co.patch DEBUG util.py:461: 0724-muse-book-add-muse-book-board-dts-support.patch DEBUG util.py:461: 0725-k1-enable-USB_RTL8152.patch DEBUG util.py:461: 0726-k1-ce-fix-slab-out-of-bounds-by-KASAN-report.patch DEBUG util.py:461: 0727-display-Update-spacemit-drm-to-linux6.6.patch DEBUG util.py:461: 0728-v2d-Enable-v2d.patch DEBUG util.py:461: 0729-ax88179-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0730-clk-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0731-gmac-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0732-rf-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0733-usb-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0734-pinctrl-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0735-crypto-change-file-mode-0755-to-0644.patch DEBUG util.py:461: 0736-input-change-mode-from-0755-to-0644.patch DEBUG util.py:461: 0737-spi-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0738-pci-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0739-reset-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0740-adma-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0741-ir-chagne-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0742-pwm-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0743-wdt-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0744-reboot-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0745-dts-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0746-camera-change-file-mode-from-0755-to-0644.patch DEBUG util.py:461: 0747-k1-spm8821-enable-mask_unmask_non_inverted-property-.patch DEBUG util.py:461: 0748-dts-set-iomem-the-nomap-propertiers.patch DEBUG util.py:461: 0749-wireless-support-pcie-wifi-rtl8852be.patch DEBUG util.py:461: 0750-hdmiaudio-fix-no-sound-after-suspend-resume.patch DEBUG util.py:461: 0751-dts-change-i2s-target-rate.patch DEBUG util.py:461: 0752-clock-change-i2s-clock-parent-and-rate.patch DEBUG util.py:461: 0753-audio-add-mclk-config-flow.patch DEBUG util.py:461: 0754-dts-add-es8326-snd-card-support-for-MINI-PC.patch DEBUG util.py:461: 0755-audio-fix-audio-compile-error.patch DEBUG util.py:461: 0756-k1x-enable-audio-support.patch DEBUG util.py:461: 0757-audio-fix-i2s-audio-noise-due-to-dmabuffer-is-cached.patch DEBUG util.py:461: 0758-fix-regulator-do-not-load-the-driver-asynchronously-.patch DEBUG util.py:461: 0759-kconfig-add-config-ARCH_FORCE_MAX_ORDER-to-fix-defau.patch DEBUG util.py:461: 0760-riscv-show-reason-of-unaligned-access-speed-are-diff.patch DEBUG util.py:461: 0761-isa-modify-riscv-isa-format-definition.patch DEBUG util.py:461: 0762-deconfig-enable-CONFIG_DEBUG-to-more-debug-log.patch DEBUG util.py:461: 0763-aud-fix-i2s-pointer-pos-to-integer-multiple-of-perio.patch DEBUG util.py:461: 0764-arch-riscv-boot-dts-Fixed-MUSE-Book-model-to-M1-MUSE.patch DEBUG util.py:461: 0765-dts-add-orisetech-ota7290b-lcd-panel-1920-1200.patch DEBUG util.py:461: 0766-qspi-fix-the-warning-when-disable-the-clk-and-bus-cl.patch DEBUG util.py:461: 0767-k1x-6.6-support-flexcan-on-k1x-platform.patch DEBUG util.py:461: 0768-arch-riscv-k1_deb1-Added-pwm-fan.patch DEBUG util.py:461: 0769-dts-sync-the-k1-x_deb1-modify-to-the-k1-x_milkv-jupi.patch DEBUG util.py:461: 0770-dts-add-milkv-jupiter-board-of-M1.patch DEBUG util.py:461: 0771-dts-add-SiPEED-LPi3A-board-support.patch DEBUG util.py:461: 0772-at24-clean-compile-warning.patch DEBUG util.py:461: 0773-defconfig-update-defconfig.patch DEBUG util.py:461: 0774-defconfig-support-some-cpufreq-governor.patch DEBUG util.py:461: 0775-pm-pinctrl-support-edge-detect-wakeup-functoin.patch DEBUG util.py:461: 0776-spacemit-rf-support-wlan-irq-hostwake.patch DEBUG util.py:461: 0777-k1-modify-wlan-hostwake-to-pinctl.patch DEBUG util.py:461: 0778-deconfig-disable-kasan-debug.patch DEBUG util.py:461: 0779-k1-set-USB0-to-host-mode-for-MUSE-Book.patch DEBUG util.py:461: 0780-k1-add-wlan-hostwake-config-for-MINI-PC-and-milkv-ju.patch DEBUG util.py:461: 0781-display-fix-dsi-dphy-hs-prepare-and-hs-zero-cycle.patch DEBUG util.py:461: 0782-display-reserve-hdmi-compatibility-config-for-chips-.patch DEBUG util.py:461: 0783-display-modify-the-method-for-obtaining-hdmi-edid.patch DEBUG util.py:461: 0784-display-support-lt9711-for-mipi-dsi-to-dp.patch DEBUG util.py:461: 0785-display-remove-debug-log.patch DEBUG util.py:461: 0786-display-remove-useless-codes-and-fix-edp-driver.patch DEBUG util.py:461: 0787-display-support-dp-panel.patch DEBUG util.py:461: 0788-display-modify-edp-brightness-levels.patch DEBUG util.py:461: 0789-display-support-256-bytes-edid-data-for-hdmi.patch DEBUG util.py:461: 0790-display-detect-dp-plug-in-and-plug-out.patch DEBUG util.py:461: 0791-display-modify-the-order-of-the-backlight-for-the-lt.patch DEBUG util.py:461: 0792-display-do-not-operate-clock-during-the-pm-runtime.patch DEBUG util.py:461: 0793-display-modify-the-minimum-backlight-brightness-valu.patch DEBUG util.py:461: 0794-keep-bootloader-logo-on-and-release-backlight-first.patch DEBUG util.py:461: 0795-display-trun-off-lcd-power-domain-after-the-probe-fu.patch DEBUG util.py:461: 0796-ccu-fix-rpwm-clk-sel.patch DEBUG util.py:461: 0797-crypto-reset-and-clock-is-shared-between-crypto-engi.patch DEBUG util.py:461: 0798-efuse-add-spacemit-efuse-driver.patch DEBUG util.py:461: 0799-socinfo-add-spacemit-soc-information-driver.patch DEBUG util.py:461: 0800-dts-support-efuse-and-cpuinfo-module.patch DEBUG util.py:461: 0801-defconfig-enable-efuse-and-socinfo-module.patch DEBUG util.py:461: 0802-k1x-adjust-ddr-master-devices-dram_range.patch DEBUG util.py:461: 0803-dts-modify-pcie-bar-area-layout.patch DEBUG util.py:461: 0804-ccu-add-pll3-clk-frequency.patch DEBUG util.py:461: 0805-scripts-package-mkdebian.patch DEBUG util.py:461: 0806-efuse-add-nvmem-cells-according-to-the-dts.patch DEBUG util.py:461: 0807-dts-fix-the-error-of-cache-sets-number.patch DEBUG util.py:461: 0808-gpu-fix-workqueue-warning.patch DEBUG util.py:461: 0809-k1-support-mult-frequency-table-and-using-one-policy.patch DEBUG util.py:461: 0810-hdmiaudio-fix-no-sound-issue-on-some-hdmi-display-du.patch DEBUG util.py:461: 0811-pinctrl-fix-compile-warning.patch DEBUG util.py:461: 0812-mipi-fix-compile-warninng.patch DEBUG util.py:461: 0813-i2c-fix-warn_on-when-system-power-off.patch DEBUG util.py:461: 0814-aud-fix-can-not-play-record-issue-after-suspend-resu.patch DEBUG util.py:461: 0815-display-release-reserved-memory-for-bootlogo.patch DEBUG util.py:461: 0816-fs-enable-ubifs-jffs2-and-squashfs.patch DEBUG util.py:461: 0817-k1-thermal-separate-the-thermal-configuration-and-re.patch DEBUG util.py:461: 0818-k1x-add-MUSE-Card-dts-support.patch DEBUG util.py:461: 0819-k1x-add-MUSE-Paper-dts-support.patch DEBUG util.py:461: 0820-usb-dwc3-support-remote-wakeup.patch DEBUG util.py:461: 0821-usb-ehci-support-remote-wakeup.patch DEBUG util.py:461: 0822-usb-dwc3-enable-irqwake-in-dwc3_suspend-instead-of-s.patch DEBUG util.py:461: 0823-usb-dwc3-enable-linestate1-wakeup-mask.patch DEBUG util.py:461: 0824-usb-disable-remote-wakeup-default.patch DEBUG util.py:461: 0825-phy-k1x-ci-otg-adjust-Makefile-order.patch DEBUG util.py:461: 0826-bluetooth-use-kernel-btrtl-for-8852bu-instead-of-rtk.patch DEBUG util.py:461: 0827-phy-spacemit-k1x-combphy-add-suspend-term-quirk.patch DEBUG util.py:461: 0828-k1x-adjust-crypto-alloc-buffer-and-set-mask-turns.patch DEBUG util.py:461: 0829-riscv-dts-spacemit-fix-PCIe-lane-number-for-deb1.patch DEBUG util.py:461: 0830-pinctrl-modify-some-pins-pull-configurations.patch DEBUG util.py:461: 0831-spacemit-rf-modify-default-value-of-poweron-delay.patch DEBUG util.py:461: 0832-k1-MUSE-Pi-update-sdio-tx-delaycode.patch DEBUG util.py:461: 0833-mmc-sdhci-of-k1x-fix-cpufreq-while-execute-sw-tuning.patch DEBUG util.py:461: 0834-m1-milkv-jupiter-specify-cpufreq-during-sdio-rx-tuni.patch DEBUG util.py:461: 0835-camera-move-spacemit-bifmode-enable-from-dtsi-to-dts.patch DEBUG util.py:461: 0836-MUSE-Paper-remove-hdmiaudio-support.patch DEBUG util.py:461: 0837-k1-MUSE-Pi-update-sdio-tx-delaycode-to-0x30.patch DEBUG util.py:461: 0838-uart0-dts-add-uart-controller-configuration-for-open.patch DEBUG util.py:461: 0839-k1-cpufreq-using-the-default-vf-table-of-we-did-not-.patch DEBUG util.py:461: 0840-k1x-adjust-buck4-ldo1-7-suspend-voltage-to-0V.patch DEBUG util.py:461: 0841-k1x-MINIPC-adjust-ldo1-to-always-on-for-secjtag-TRST.patch DEBUG util.py:461: 0842-uart-clean-debug-info.patch DEBUG util.py:461: 0843-jpu-clean-debug-info.patch DEBUG util.py:461: 0844-pcie-clean-debug-info.patch DEBUG util.py:461: 0845-sound-clean-debug-info.patch DEBUG util.py:461: 0846-k1x-fix-dldo1-always-on-to-aldo1-always-on.patch DEBUG util.py:461: 0847-change-error-to-warning-when-frequency-table-is-full.patch DEBUG util.py:461: 0848-Add-support-for-ICM42607-sensor.patch DEBUG util.py:461: 0849-camera-sync-code-from-linux-6.1.patch DEBUG util.py:461: 0850-k1-pm-domain-disable-wakeup5-by-default.patch DEBUG util.py:461: 0851-k1-pm-close-some-dcdc-ldo-to-optimize-sleep-power-co.patch DEBUG util.py:461: 0852-Linux-Open-jffs2-and-squash-support.patch DEBUG util.py:461: 0853-Linux-For-the-Power-button-shutdown-add-support-for-.patch DEBUG util.py:461: 0854-To-ensure-a-better-user-experience-set-the-battery-l.patch DEBUG util.py:461: 0855-To-add-hall-sensor-support-for-Muse-Paper-report-SW_.patch DEBUG util.py:461: 0856-k1-hotplug-close-the-SCMI-configuration.patch DEBUG util.py:461: 0857-pcie-supporting-PCIe-interface-power-management.patch DEBUG util.py:461: 0858-clock-add-rcpu-i2c-clock.patch DEBUG util.py:461: 0859-reset-add-rcpu-i2c-reset.patch DEBUG util.py:461: 0860-gmac-supporting-ptp-with-hardware-timestamp.patch DEBUG util.py:461: 0861-display-modify-panel-backlight-level.patch DEBUG util.py:461: 0862-display-add-panel-notifier-event-for-spacemit.patch DEBUG util.py:461: 0863-display-add-mipi-lcd-icnl9951r.patch DEBUG util.py:461: 0864-display-support-mipi-lcd-avee-and-avdd.patch DEBUG util.py:461: 0865-display-add-resume-and-suspend-for-lt9711-driver.patch DEBUG util.py:461: 0866-k1-cpufreq-Support-dynamic-switching-of-1.6G-and-1.8.patch DEBUG util.py:461: 0867-k1-pm-domain-improve-the-detach-operation-of-the-pow.patch DEBUG util.py:461: 0868-gmac-fixed-the-bug-that-Ethernet-phy-cannot-enter-lo.patch DEBUG util.py:461: 0869-k1x-add-MUSE-Paper-mini-4g-dts-support.patch DEBUG util.py:461: 0870-clock-fix-can-not-get-correct-rate-issue.patch DEBUG util.py:461: 0871-pcie-modify-the-phy-initialization-for-pcie-controll.patch DEBUG util.py:461: 0872-k1-x_MUSE-Book-not-reset-usb-during-suspend.patch DEBUG util.py:461: 0873-k1-MUSE-Paper-update-dts-enable-usb-and-wifi.patch DEBUG util.py:461: 0874-k1-MUSE-Paper-enable-uart2-for-bluetooth.patch DEBUG util.py:461: 0875-k1-MUSE-Paper-update-card-detection-logic.patch DEBUG util.py:461: 0876-ehci-k1x-ci-fix-multiple-instance-debugfs-conflict.patch DEBUG util.py:461: 0877-mingo-change-u3-role-switch-default-mode-to-host.patch DEBUG util.py:461: 0878-spi-nor-supporting-FM25Q64AI3-spi-nor-flash.patch DEBUG util.py:461: 0879-k1x-i2c1-i2c6-apply-for-the-same-pin-delete-i2c1.patch DEBUG util.py:461: 0880-k1x-fix-crypto-buffer-data-copy-method.patch DEBUG util.py:461: 0881-dts-adding-the-power-switch-of-wifi-and-bt-on-kx312.patch DEBUG util.py:461: 0882-dts-adding-the-power-switch-of-wifi-and-bt-on-MUSE-B.patch DEBUG util.py:461: 0883-this-is-not-pcie-patch-Revert-pcie-clean-debug-info.patch DEBUG util.py:461: 0884-pcie-clean-debug-info.patch DEBUG util.py:461: 0885-pcie-fix-the-bug-that-Samsung-nvme-ssd-link-establis.patch DEBUG util.py:461: 0886-k1x-disable-watchdog.patch DEBUG util.py:461: 0887-arch-riscv-boot-dts-Enable-MUSE-Book-eeprom-by-defau.patch DEBUG util.py:461: 0888-k1-x_lpi3a.dts-change-usb2.0otg-port-to-device-mode.patch DEBUG util.py:461: 0889-k1-x_lpi3a.dts-fix-no-interrupt-of-ctp.patch DEBUG util.py:461: 0890-k1_deconfig-add-i2c-gpio-expander-PCA953X-driver.patch DEBUG util.py:461: 0891-codec-add-es7210-driver.patch DEBUG util.py:461: 0892-codec-add-es8156-driver.patch DEBUG util.py:461: 0893-dts-fix-JD9365DA-10.1-inch-lcd-cann-t-display-for-lp.patch DEBUG util.py:461: 0894-as1911-change-file-mode-to-0644.patch DEBUG util.py:461: 0895-k1-pm-rproc-put-the-de-assert-of-rproc-s-clock-into-.patch DEBUG util.py:461: 0896-dtsi-k1-add-otg1-support-add-wakeup_reg-reg.patch DEBUG util.py:461: 0897-k1x_udc_core-fix-global-variable-and-extcon.patch DEBUG util.py:461: 0898-phy-k1x-ci-otg-refactor-otg-logic-to-support-more-us.patch DEBUG util.py:461: 0899-ehci-k1x-ci-fix-otg-suspend-resume-and-pm_runtime.patch DEBUG util.py:461: 0900-k1_defconfig-enable-otg-support.patch DEBUG util.py:461: 0901-k1-milkv-jupiter-update-sdio-tx-delaycode-to-0x30.patch DEBUG util.py:461: 0902-Linux-Add-a-virtual-charger-driver.This-resolves-the.patch DEBUG util.py:461: 0903-display-fix-the-issue-of-bootlogo-flashing-screen.patch DEBUG util.py:461: 0904-gmac-set-mac_managed_pm-to-true-to-fix-mdio-resume-w.patch DEBUG util.py:461: 0905-MUSE-N1-u3-set-the-default-mode-to-host-1.so-2.5G-et.patch DEBUG util.py:461: 0906-adma-fix-compile-warning.patch DEBUG util.py:461: 0907-k1x-flexcan-do-ram-init-by-iowrite32-instead-of-mems.patch DEBUG util.py:461: 0908-thermal-add-hwmon-sysfs-node-for-some-debug-tools.patch DEBUG util.py:461: 0909-thermal-fix-compile-error-because-of-sysfs-register-.patch DEBUG util.py:461: 0910-k1x-support-cw2015-driver.patch DEBUG util.py:461: 0911-defconfig-update-kernel-default-configuration.patch DEBUG util.py:461: 0912-clock-add-rcpu-ir-uart0-uart1-ssp-clocks.patch DEBUG util.py:461: 0913-reset-add-rcpu-ir-uart0-uart1-ssp-resets.patch DEBUG util.py:461: 0914-display-fix-compile-warning.patch DEBUG util.py:461: 0915-camera-fix-compile-warning.patch DEBUG util.py:461: 0916-crypto-fix-compile-warning.patch DEBUG util.py:461: 0917-vpu-fix-compile-warning.patch DEBUG util.py:461: 0918-reset-fix-compile-warning.patch DEBUG util.py:461: 0919-cpufreq-fix-compile-warning.patch DEBUG util.py:461: 0920-spi-fix-compile-warning.patch DEBUG util.py:461: 0921-usb-fix-compiler-warning.patch DEBUG util.py:461: 0922-clock-fix-compile-warning.patch DEBUG util.py:461: 0923-gmac-fix-compiler-warning.patch DEBUG util.py:461: 0924-codec-fix-compile-warning.patch DEBUG util.py:461: 0925-k1-muse_book-support-hall-to-wakeup-system.patch DEBUG util.py:461: 0926-usb-typec-husb239-support-hynetek-husb239.patch DEBUG util.py:461: 0927-k1-defconfig-support-husb239-typec-controller.patch DEBUG util.py:461: 0928-k1x-x60-can-and-rcpu-can-separate.patch DEBUG util.py:461: 0929-k1-MUSE-Paper-support-husb239-typec-controller.patch DEBUG util.py:461: 0930-ai-fix-error-in-bind-ai-task-to-ai-core.patch DEBUG util.py:461: 0931-phy-k1x-ci-usb2-add-set_suspend-op.patch DEBUG util.py:461: 0932-phy-k1x-ci-otg-set-role-to-default-role-in-probe.patch DEBUG util.py:461: 0933-k1-x_MUSE-Pi-enable-otg1-and-set-dwc3-to-drd-mode.patch DEBUG util.py:461: 0934-k1-x_MUSE-Book-enable-otg-for-usb0.patch DEBUG util.py:461: 0935-k1x-support-rcpu-uart1-function-through-x60.patch DEBUG util.py:461: 0936-k1-i2c-support-i2c-driver-of-rcpu-domain.patch DEBUG util.py:461: 0937-spacemit_onboard_hub-add-pm-domain-support.patch DEBUG util.py:461: 0938-dwc3-spacemit-add-pm-domain-support.patch DEBUG util.py:461: 0939-dtsi-k1-update-usb-power-domain-settings.patch DEBUG util.py:461: 0940-display-fix-the-issue-while-the-i2c-communication-is.patch DEBUG util.py:461: 0941-insmod-simplify-section-header-process-for-optimize-.patch DEBUG util.py:461: 0942-k1-pinctrl-we-d-better-clean-the-edge-detect-pending.patch DEBUG util.py:461: 0943-k1x-i2c-add-one-callback-of-power-off.patch DEBUG util.py:461: 0944-k1-x_MUSE-Paper-mini-4g-camera-verify-ok.patch DEBUG util.py:461: 0945-display-add-mipi-lcd-jd9365dah3.patch DEBUG util.py:461: 0946-display-add-hdmi-notifier-event-for-spacemit.patch DEBUG util.py:461: 0947-k1-power-key-don-t-report-the-event-of-power-key-whe.patch DEBUG util.py:461: 0948-k1-MUSE-Paper-mini-4g-update-dts-enable-typec-and-wi.patch DEBUG util.py:461: 0949-usb-typec-husb239-fix-possible-NULL-pointer-derefere.patch DEBUG util.py:461: 0950-k1-serial-register-freeze-restore-callback-for-hiber.patch DEBUG util.py:461: 0951-MUSE-Paper-mini-4g-enable-codec-snd-card-support.patch DEBUG util.py:461: 0952-clear-some-boot-error-without-including-these-dtsi.patch DEBUG util.py:461: 0953-pcie-Add-request-operation-before-gpio-operation.patch DEBUG util.py:461: 0954-k1x-flexcan-fix-clock-frequency-config-and-clk-set.patch DEBUG util.py:461: 0955-arch-riscv-configs-Update-k1_defconfig.patch DEBUG util.py:461: 0956-k1x-support-rcpu-ir.patch DEBUG util.py:461: 0957-asix_usb-fix-netdev-dev_addr_shadow-not-set.patch DEBUG util.py:461: 0958-k1-MUSE-Paper-mini-4g-update-modules_usrload.patch DEBUG util.py:461: 0959-mmc-sdhci-of-k1x-use-remove_new-instead-of-remove.patch DEBUG util.py:461: 0960-phy-k1x-ci-otg-fix-shared-reset-assert-warning.patch DEBUG util.py:461: 0961-spacemit-rf-introduce-spacemit-rfkill-driver.patch DEBUG util.py:461: 0962-k1-x_MUSE-Paper-mini-4g-add-4g-module-support.patch DEBUG util.py:461: 0963-pcie-Set-the-vendor-id-and-device-id-of-k1x-pcie-rc.patch DEBUG util.py:461: 0964-qmi_wwan_f-add-fibocom-qmi-modem-driver.patch DEBUG util.py:461: 0965-k1_defconfig-enable-qmi_wwan_f-as-module.patch DEBUG util.py:461: 0966-defconfig-enable-CONFIG_MTD_CMDLINE_PARTS.patch DEBUG util.py:461: 0967-k1x-turn-on-ir-spacemit-defconfig.patch DEBUG util.py:461: 0968-sbs-charger-change-file-mode-0755-0644.patch DEBUG util.py:461: 0969-k1-cpufreq-using-on-v-f-table-to-support-k1-m1-chip.patch DEBUG util.py:461: 0970-k1-cpufreq-delete-the-boost-related-node-for-k1.patch DEBUG util.py:461: 0971-k1-thermal-using-one-thermal-table-for-both-m1-k1.patch DEBUG util.py:461: 0972-k1_defconfig-add-USB-Audio-UAC-devices-support.patch DEBUG util.py:461: 0973-k1-alsa-alsa-driver-adds-audio-data-dump.patch DEBUG util.py:461: 0974-spacemit_onboard_hub-fix-Kconfig-dependancy.patch DEBUG util.py:461: 0975-gpu-Fix-building-error-with-FORTIFY_SOURCE-enabled.patch DEBUG util.py:461: 0976-k1-thermal-fix-the-issue-where-the-frequency-cannot-.patch DEBUG util.py:461: 0977-pcie-print-MSIX_AFIFO_FULL-information-once.patch DEBUG util.py:461: 0978-deconfig-enable-spinlock_debug.patch DEBUG util.py:461: 0979-MUSE-Paper-mini-support-battery-profile.patch DEBUG util.py:461: 0980-MUSE-Paper-mini-support-some-sensor.patch DEBUG util.py:461: 0981-k1x_udc_core-fix-missing-STATUS-IN-in-control-out-tr.patch DEBUG util.py:461: 0982-k1x_udc_core-fix-enable-after-disable-may-fail.patch DEBUG util.py:461: 0983-k1x_udc_core-fix-high-bandwidth-isoc-endpoint-transf.patch DEBUG util.py:461: 0984-k1x_udc_core-cleanup-info-print.patch DEBUG util.py:461: 0985-usb-typec-husb239-support-mic-switch.patch DEBUG util.py:461: 0986-usb-typec-husb239-update-pd-contract.patch DEBUG util.py:461: 0987-display-reduce-panel-lt8911exb-resume-time.patch DEBUG util.py:461: 0988-lpi3a-add-aic8800-wifi-support.patch DEBUG util.py:461: 0989-camera-fix-unknown-type-compile-error-and-comment-sl.patch DEBUG util.py:461: 0990-spacemit-rf-use-gpiod_set_value_cansleep-instead-of-.patch DEBUG util.py:461: 0991-display-fix-the-issue-of-bootlogo-flashing-screen.patch DEBUG util.py:461: 0992-k1-pm_domain-lcd-don-t-open-the-power-switch-again-i.patch DEBUG util.py:461: 0993-camera-perfect-open-close-node-in-pinmulti-mode.patch DEBUG util.py:461: 0994-k1-update-sd-sdio-tx-delaycode.patch DEBUG util.py:461: 0995-usb-f_uvc-use-GFP_DMA32-for-vb2_queue-at-spacemit-k1.patch DEBUG util.py:461: 0996-k1x-adc-p1-supprt-adc-driver-for-k1x.patch DEBUG util.py:461: 0997-display-add-plane-cursor-type-and-support-crop.patch DEBUG util.py:461: 0998-add-baton-camera-solution.patch DEBUG util.py:461: 0999-dts-add-k1-x_FusionOne-for-eli-NAS.patch DEBUG util.py:461: 1000-k1-suspend-skip-system-sync-in-kernel.patch DEBUG util.py:461: 1001-k1x-support-touchscreen-chipone-tddi.patch DEBUG util.py:461: 1002-k1x-support-sgm41515-charger-driver.patch DEBUG util.py:461: 1003-k1-reboot-add-a-flag-indicating-whether-to-shutdown-.patch DEBUG util.py:461: 1004-MUSE-Paper-support-volume-up-dowm-key-event.patch DEBUG util.py:461: 1005-hung-task-set-hung-timeout-120s.patch DEBUG util.py:461: 1006-add-new-pinctrl-node-for-FusionOne-to-support-wifi-s.patch DEBUG util.py:461: 1007-soc-support-notifier-among-modules.patch DEBUG util.py:461: 1008-usb-typec-husb239-add-notifier-event-for-typec-heads.patch DEBUG util.py:461: 1009-cpuidle-delete-the-dts-node-for-cpuidle.patch DEBUG util.py:461: 1010-clock-add-dpll-and-ddr-clocks.patch DEBUG util.py:461: 1011-usb-typec-husb239-add-vdd-supply-and-usb2-switch.patch DEBUG util.py:461: 1012-mmc-sdhci-of-k1x-avoid-recovery-sdr104-while-dts-dis.patch DEBUG util.py:461: 1013-enable-typec-for-FusionOne.patch DEBUG util.py:461: 1014-muse-paper-sync-camera-draw-dts-configuration.patch DEBUG util.py:461: 1015-k1-dts-add-all-disabled-usb-nodes.patch DEBUG util.py:461: 1016-blk-add-request-completion-flags-for-debug.patch DEBUG util.py:461: 1017-deconfig-enable-CONFIG_LOCKDEP-for-debug.patch DEBUG util.py:461: 1018-display-fix-the-issue-of-trace-during-system-sleep-a.patch DEBUG util.py:461: 1019-sound-support-build-module.patch DEBUG util.py:461: 1020-defconfig-add-audio-config.patch DEBUG util.py:461: 1021-Bluetooth-btrtl-fix-oops-in-btrtl_vendor_read_reg16.patch DEBUG util.py:461: 1022-k1-pm_domain-fix-bug-when-device-detach-from-pm-doma.patch DEBUG util.py:461: 1023-serial-fix-lockdep_assert-warning.patch DEBUG util.py:461: 1024-nvme-expose-allocation-or-mapping-failure-reports.patch DEBUG util.py:461: 1025-Fix-dma_buf-warning-with-enabled-lockdep.patch DEBUG util.py:461: 1026-camera-Fix-dma_buf-warning-with-enabled-lockdep.patch DEBUG util.py:461: 1027-vpu-Fix-dma_buf-warning-with-enabled-lockdep.patch DEBUG util.py:461: 1028-jpu-Fix-dma_buf-warning-with-enabled-lockdep.patch DEBUG util.py:461: 1029-v2d-fix-dmabuf-warning-with-enabled-lockdep.patch DEBUG util.py:461: 1030-display-modify-the-initcall-sequence-of-the-hdmi-dri.patch DEBUG util.py:461: 1031-dts-modify-hdmiaudio-config.patch DEBUG util.py:461: 1032-sound-change-from-late_initcall_sync-to-late_initcal.patch DEBUG util.py:461: 1033-hdmiaudio-support-hot-plug.patch DEBUG util.py:461: 1034-display-adjust-resolution-to-60Hz.patch DEBUG util.py:461: 1035-ir-fix-global-out-of-bounds-when-KASAN-enable.patch DEBUG util.py:461: 1036-k1x-chipone-tddi-reduce-init-log-level.patch DEBUG util.py:461: 1037-disable-the-function-that-auto-switch-usb-mode-at-Fu.patch DEBUG util.py:461: 1038-dts-add-orangepi-rv2-solution.patch DEBUG util.py:461: 1039-orangepi-rv2-add-usb-ctl-adaptation.patch DEBUG util.py:461: 1040-k1-hall-support-separating-wake-up-interrupts-from-n.patch DEBUG util.py:461: 1041-k1-pwr-key-support-wakeup-count.patch DEBUG util.py:461: 1042-k1x-fix-xts-aes-key2-error.patch DEBUG util.py:461: 1043-mmc-sdhci-of-k1x-support-MMC1-debug-as-uart0.patch DEBUG util.py:461: 1044-k1-MUSE-Paper-add-SD-debug-pinctrl.patch DEBUG util.py:461: 1045-stacktrace-delect-KASAN-warning.patch DEBUG util.py:461: 1046-gpu-fix-slab-use-after-free-err.patch DEBUG util.py:461: 1047-k1x-support-ddr-bandwidth-tool-driver.patch DEBUG util.py:461: 1048-dts-MUSE-Pi-remove-cd-inverted-of-sdhci0.patch DEBUG util.py:461: 1049-k1x-clean-uart-useless-info.patch DEBUG util.py:461: 1050-add-ili9881c-mipi-to-orangepi-rv2.patch DEBUG util.py:461: 1051-camera-verify-camera-success.patch DEBUG util.py:461: 1052-orangepi-rv2-add-es8323-config-and-modify-sound-code.patch DEBUG util.py:461: 1053-defconfig-support-codec-es8323.patch DEBUG util.py:461: 1054-usb-typec-husb239-enable-Try.SNK-mechanism.patch DEBUG util.py:461: 1055-display-fix-mmu-configuration-error-while-tbu-id-is-.patch DEBUG util.py:461: 1056-k1x-stop-watchdog-before-the-system-suspend-and-reco.patch DEBUG util.py:461: 1057-k1x-remove-cw2015-useless-info.patch DEBUG util.py:461: 1058-k1-MUSE-Paper-fix-the-mistake-about-sd-sdio-tx-delay.patch DEBUG util.py:461: 1059-camera-sync-V5.7-code-and-verify-single_online_test.patch DEBUG util.py:461: 1060-k1x-update-MUSE-Paper-cw2015-profile.patch DEBUG util.py:461: 1061-k1x-add-ZT001H-dts-support.patch DEBUG util.py:461: 1062-vpu-Fix-circular-lock-warning-with-enabled-lockdep.patch DEBUG util.py:461: 1063-vpu-Fix-amvx-build-error-when-building-amvx-as-modul.patch DEBUG util.py:461: 1064-k1-add-fanghang-k1-x_uav-dts.patch DEBUG util.py:461: 1065-riscv-Flush-the-icache-of-all-cores-related-to-the-c.patch DEBUG util.py:461: 1066-clock-reset-add-rcpu-pwm-clocks-and-resets.patch DEBUG util.py:461: 1067-k1x-1.fix-gpio74-function2-pwm9-rpwm9-2.add-rpwm0-9-.patch DEBUG util.py:461: 1068-dts-modify-the-address-space-allocation-of-pcie2_rc.patch DEBUG util.py:461: 1069-PCI-Add-arch_can_pci_mmap_wc-macro-on-spacemit-k1-so.patch DEBUG util.py:461: 1070-k1x-support-chsc5xxx-touchpad-driver.patch DEBUG util.py:461: 1071-k1x-MUSE-Paper-mini-4g-support-charger.patch DEBUG util.py:461: 1072-k1-x_uav-camera-verify-imx415-okay.patch DEBUG util.py:461: 1073-defconfig-add-real-time-linux-defconfig.patch DEBUG util.py:461: 1074-k1_uav-enable-uart-ports.patch DEBUG util.py:461: 1075-drm-radeon-mask-MSI-on-K1x.patch DEBUG util.py:461: 1076-radeon-amdgpu-force-32-bit-dma.patch DEBUG util.py:461: 1077-Radeon-modify-cached-mapping-to-writecombine.patch DEBUG util.py:461: 1078-k1-add-radeon-module-in-k1_defconfig.patch DEBUG util.py:461: 1079-camera-Fix-isp-and-cpp-build-error-when-building-the.patch DEBUG util.py:461: 1080-defconfig-disable-LOCKDEP-config.patch DEBUG util.py:461: 1081-rt-defconfig-config-CONFIG_PREEMPT_RT.patch DEBUG util.py:461: 1082-mmc-sdhci-of-k1x-fix-bug-about-get-invalid-cpufreq_p.patch DEBUG util.py:461: 1083-dts-update-k1-x_uav-disabled-some-no-used-moduels-fi.patch DEBUG util.py:461: 1084-k1-support-decompression-of-zstd-format-file.patch DEBUG util.py:461: 1085-1.add-clk-reset-to-i2c3-2.enable-rpwm9.patch DEBUG util.py:461: 1086-cpuinfo-add-uarch-information.patch DEBUG util.py:461: 1087-k1x-clear-charger-useless-info.patch DEBUG util.py:461: 1088-es8326-support-headphone-notifier-call-chain.patch DEBUG util.py:461: 1089-es8326-fix-es8326-no-sound-due-to-data-length-settin.patch DEBUG util.py:461: 1090-es8326-fix-no-sound-issue-after-suspend-resume.patch DEBUG util.py:461: 1091-es8326-cleanup-unused-code.patch DEBUG util.py:461: 1092-es8326-reset-jack-status-when-suspend.patch DEBUG util.py:461: 1093-riscv-rwonce-add-__READ_ONCE-implementation-for-risc.patch DEBUG util.py:461: 1094-riscv-spackemit-add-of-node-get-for-process-cpuinfo-.patch DEBUG util.py:461: 1095-sound-adapt-linux-kernel-new-vision.patch DEBUG util.py:461: 1096-usb-phy-modify-prototype-of-device-remove-function.patch DEBUG util.py:461: 1097-usb-dwc3-modify-prototype-of-device-remove-function.patch DEBUG util.py:461: 1098-usb-udc-modify-prototype-of-device-remove-function.patch DEBUG util.py:461: 1099-usb-host-modify-prototype-of-device-remove-function.patch DEBUG util.py:461: 1100-usb-misc-modify-prototype-of-device-remove-function.patch DEBUG util.py:461: 1101-spi-spacemit-modify-prototype-of-device-remove-funct.patch DEBUG util.py:461: 1102-qspi-spacemit-modify-prototype-of-device-remove-func.patch DEBUG util.py:461: 1103-crypto-spacemit-replace-strlcpy-with-strscpy.patch DEBUG util.py:461: 1104-dma-spacemit-adma-modify-prototype-of-device-remove-.patch DEBUG util.py:461: 1105-dma-spacemit-modify-prototype-of-device-remove-funct.patch DEBUG util.py:461: 1106-spacemit-v2d-modify-prototype-of-device-remove-funct.patch DEBUG util.py:461: 1107-soc-spacemit-modify-prototype-of-device-remove-funct.patch DEBUG util.py:461: 1108-soc-spacemit-pm-fix-error-when-save-context-for-lowp.patch DEBUG util.py:461: 1109-spacemit-jpu-modify-prototype-of-device-remove-funct.patch DEBUG util.py:461: 1110-spacemit-ddrbw-clear-compile-warnings.patch DEBUG util.py:461: 1111-remoteproc-spacemit-modify-prototype-of-device-remov.patch DEBUG util.py:461: 1112-i2c-k1x-modify-prototype-of-device-remove-function.patch DEBUG util.py:461: 1113-plic-fix-error-on-some-offset-macro-definition.patch DEBUG util.py:461: 1114-mailbox-spacemit-modify-prototype-of-device-remove-f.patch DEBUG util.py:461: 1115-extcon-k1x-modify-prototype-of-device-remove-functio.patch DEBUG util.py:461: 1116-camera-spacemit-modify-prototype-of-device-remove-fu.patch DEBUG util.py:461: 1117-vpu-spacemit-modify-prototype-of-device-remove-funct.patch DEBUG util.py:461: 1118-ir-spacemit-modify-prototype-of-device-remove-functi.patch DEBUG util.py:461: 1119-wdt-k1x-modify-prototype-of-device-remove-function.patch DEBUG util.py:461: 1120-thermal-k1x-modify-prototype-of-device-remove-functi.patch DEBUG util.py:461: 1121-phy-combphy-clean-compile-warning-because-of-prototy.patch DEBUG util.py:461: 1122-pxa-k1x-adapt-to-linux-kernel-new-version.patch DEBUG util.py:461: 1123-power-supply-sbs-modify-prototype-of-device-remove-f.patch DEBUG util.py:461: 1124-pcie-k1x-porting-to-linux-6.12.patch DEBUG util.py:461: 1125-nvme-remove-segment-buffer-size-limit.patch DEBUG util.py:461: 1126-tcm-spacemit-modify-prototype-of-device-remove-funct.patch DEBUG util.py:461: 1127-flexcan-fix-error-in-flexcan-core-probe-function.patch DEBUG util.py:461: 1128-emac-k1x-fix-compile-warning-on-function-prototype.patch DEBUG util.py:461: 1129-stmmac-modify-prototype-of-device-remove-function.patch DEBUG util.py:461: 1130-ax88179a-porting-to-linux-6.12.patch DEBUG util.py:461: 1131-usb-qmi_wwan_f-replace-strlcpy-by-strscpy.patch DEBUG util.py:461: 1132-spi-nor-porting-fmsh-device-driver-to-linux-6.12.patch DEBUG util.py:461: 1133-drm-spacemit-porting-drm-driver-to-linux-6.12.patch DEBUG util.py:461: 1134-gpio-k1x-porting-gpio-driver-to-linux-6.12.patch DEBUG util.py:461: 1135-build-disable-character-output-display-during-the-ke.patch DEBUG util.py:461: 1136-riscv-restore-vmlinux-target-building-command.patch DEBUG util.py:461: 1137-wireless-rtl8852be-porting-to-linux-6.12.patch DEBUG util.py:461: 1138-wireless-rtl8852bs-porting-to-linux-6.12.patch DEBUG util.py:461: 1139-defconfig-disable-some-modules-which-not-ready.patch DEBUG util.py:461: 1140-k1-mainline-update-head-files-for-compile-errors.patch DEBUG util.py:461: 1141-k1-mainline-defconfig-enable-spacemit-ir-driver.patch DEBUG util.py:461: 1142-k1-mainline-defconfig-enable-codec-es8326-support.patch DEBUG util.py:461: 1143-k1-mainline-es8326-fix-es8326-compile-and-work-issue.patch DEBUG util.py:461: 1144-k1-regulator-enable-the-driver-of-regulator.patch DEBUG util.py:461: 1145-display-resolve-the-issue-of-no-display-on-HDMI.patch DEBUG util.py:461: 1146-i2c-spacemit-k1-fix-strcpy-func-in-i2c-driver.patch DEBUG util.py:461: 1147-riscv-k1-defconfig-support-i2c-driver.patch DEBUG util.py:461: 1148-plic-spacemit-k1-declare-irqchip-of-plic-riscv0.patch DEBUG util.py:461: 1149-watchdog-spacemit-k1-fix-suspend-enable-judge.patch DEBUG util.py:461: 1150-gpu-upgrade-to-24.2.patch DEBUG util.py:461: 1151-gpu-img-rogue-add-judgment-of-linux-version-and-keep.patch DEBUG util.py:461: 1152-gpu-make-sure-gpu-probe-before-display.patch DEBUG util.py:461: 1153-drm-img-rogue-porting-gpu-driver-to-linux-6.12.patch DEBUG util.py:461: 1154-gpu-img-rogue-update-to-linux-6.12-fix-pvr_drm_fops.patch DEBUG util.py:461: 1155-soc-spacemit-add-prototype-define-for-multi-modules.patch DEBUG util.py:461: 1156-clk-spacemit-clean-compile-warnings.patch DEBUG util.py:461: 1157-pinctrl-spacemit-p1-support-pmic-pins.patch DEBUG util.py:461: 1158-spi-k1-spi-porting-to-linux-6.12.patch DEBUG util.py:461: 1159-spi-k1-qspi-porting-to-linux-6.12.patch DEBUG util.py:461: 1160-dwc3-spacemit-fix-compile-warning.patch DEBUG util.py:461: 1161-usb-gadget-fix-compile-warning.patch DEBUG util.py:461: 1162-usb-xhci-hub-fix-compile-warnings.patch DEBUG util.py:461: 1163-wdt-k1-fix-compile-warning.patch DEBUG util.py:461: 1164-wireless-rtl8852bs-porting-to-linux-6.12.patch DEBUG util.py:461: 1165-cpufreq-k1-fix-compile-warning.patch DEBUG util.py:461: 1166-crypto-k1-fix-compile-warning.patch DEBUG util.py:461: 1167-usbnet-fix-compile-warning.patch DEBUG util.py:461: 1168-mmc-k1x-fix-compile-warning.patch DEBUG util.py:461: 1169-v2d-spacemit-fix-compile-warning.patch DEBUG util.py:461: 1170-power-sgm4154x-reshape-file-style.patch DEBUG util.py:461: 1171-media-k1x-vpu-porting-to-linux-6.12.patch DEBUG util.py:461: 1172-media-k1x-camera-porting-to-linux-6.12.patch DEBUG util.py:461: 1173-drm-k1x-fix-compile-warning.patch DEBUG util.py:461: 1174-drm-k1x-gpu-fix-compile-warning.patch DEBUG util.py:461: 1175-riscv-k1-kconfig-update-kernel-configuration.patch DEBUG util.py:461: 1176-media-k1-vpu-fix-error-on-MODULE_IMPORT_NS-using.patch DEBUG util.py:461: 1177-mmc-k1-fix-error-of-driver.remove.patch DEBUG util.py:461: 1178-soc-spacemit-v2d-fix-error-on-MODULE_IMPORT_NS-using.patch DEBUG util.py:461: 1179-usb-spacemit-k1-fix-compile-error.patch DEBUG util.py:461: 1180-sound-k1-fix-compile-error.patch DEBUG util.py:461: 1181-opp-k1-fix-compile-error.patch DEBUG util.py:461: 1182-can-k1-flexcan-fix-error-on-driver.remove.patch DEBUG util.py:461: 1183-wireless-rtl8852bs-porting-to-linux-6.13.patch DEBUG util.py:461: 1184-drm-img-rogue-fix-error-on-MODULE_IMPORT_NS-using.patch DEBUG util.py:461: 1185-drm-spacemit-porting-to-linux-6.13.patch DEBUG util.py:461: 1186-camera-fix-compilation-problems-and-run-imx415-in-de.patch DEBUG util.py:461: 1187-wdt-k1x-fix-MODULE_LICENSE-announce-error.patch DEBUG util.py:461: 1188-soc-k1-jpu-fix-MODULE_LICENSE-announce-error.patch DEBUG util.py:461: 1189-thermal-k1-Correct-a-typo-in-the-code.patch DEBUG util.py:461: 1190-dma-dw-axi-dmac-Correct-a-typo-in-the-code.patch DEBUG util.py:461: 1191-media-k1-camera-fix-some-compile-warnings.patch DEBUG util.py:461: 1192-riscv-k1-dts-remove-some-reserved-memory-region.patch DEBUG util.py:461: 1193-Revert-riscv-Fix-IPIs-usage-in-kfence_protect_page.patch DEBUG util.py:461: 1194-k1x_rproc-avoid-creating-busy-looping-mailbox-thread.patch DEBUG util.py:461: 1195-fix-module-dma_buf-ns.patch DEBUG util.py:461: 1196-fix-wrong-style-comments.patch DEBUG util.py:461: 1197-Remove-depends-so-PWM_PXA-can-be-enabled.patch DEBUG util.py:461: 1198-remove-trace_printk.patch DEBUG util.py:461: 1199-remove-unused-var.patch DEBUG util.py:461: 1200-Remove-depends-so-SERIAL_8250_PXA-can-be-enabled.patch DEBUG util.py:461: 1201-fix-includes-for-timestamp.patch DEBUG util.py:461: 1202-remove-debug-rdinit-from-m1-bpi.patch DEBUG util.py:461: 1203-6.14-fixes-to-spacemit_drm-and-pvr_drm.patch DEBUG util.py:461: 1204-Add-bit-brick-k1-devicetree-from-bianbu.patch DEBUG util.py:461: 1205-Add-minimal-hacked-up-OrangePI-RV2-devicetree.patch DEBUG util.py:461: 1206-6.15-fixes.patch DEBUG util.py:461: 1207-Add-distinct-compatibles-for-boards-currently-used-f.patch DEBUG util.py:461: 1208-fix-build-issue-k1x_cpp.c-1453-18-error-expected-or-.patch DEBUG util.py:461: 1209-fix-issue-https-github.com-jmontleon-linux-bianbu-is.patch DEBUG util.py:461: 1210-RTL8852-6.15-fixes.patch DEBUG util.py:461: Makefile.rhelver DEBUG util.py:461: Module.kabi_aarch64 DEBUG util.py:461: Module.kabi_dup_aarch64 DEBUG util.py:461: Module.kabi_dup_ppc64le DEBUG util.py:461: Module.kabi_dup_riscv64 DEBUG util.py:461: Module.kabi_dup_s390x DEBUG util.py:461: Module.kabi_dup_x86_64 DEBUG util.py:461: Module.kabi_ppc64le DEBUG util.py:461: Module.kabi_riscv64 DEBUG util.py:461: Module.kabi_s390x DEBUG util.py:461: Module.kabi_x86_64 DEBUG util.py:461: Patchlist.changelog DEBUG util.py:461: README.rst DEBUG util.py:461: check-kabi DEBUG util.py:461: def_variants.yaml.fedora DEBUG util.py:461: def_variants.yaml.rhel DEBUG util.py:461: dracut-virt.conf DEBUG util.py:461: fedoraimaca.x509 DEBUG util.py:461: filtermods.py DEBUG util.py:461: flavors DEBUG util.py:461: gating.yaml DEBUG util.py:461: generate_all_configs.sh DEBUG util.py:461: kernel-aarch64-16k-debug-fedora.config DEBUG util.py:461: kernel-aarch64-16k-fedora.config DEBUG util.py:461: kernel-aarch64-64k-debug-rhel.config DEBUG util.py:461: kernel-aarch64-64k-rhel.config DEBUG util.py:461: kernel-aarch64-automotive-debug-rhel.config DEBUG util.py:461: kernel-aarch64-automotive-rhel.config DEBUG util.py:461: kernel-aarch64-debug-fedora.config DEBUG util.py:461: kernel-aarch64-debug-rhel.config DEBUG util.py:461: kernel-aarch64-fedora.config DEBUG util.py:461: kernel-aarch64-rhel.config DEBUG util.py:461: kernel-aarch64-rt-64k-debug-fedora.config DEBUG util.py:461: kernel-aarch64-rt-64k-debug-rhel.config DEBUG util.py:461: kernel-aarch64-rt-64k-fedora.config DEBUG util.py:461: kernel-aarch64-rt-64k-rhel.config DEBUG util.py:461: kernel-aarch64-rt-debug-fedora.config DEBUG util.py:461: kernel-aarch64-rt-debug-rhel.config DEBUG util.py:461: kernel-aarch64-rt-fedora.config DEBUG util.py:461: kernel-aarch64-rt-rhel.config DEBUG util.py:461: kernel-abi-stablelists-6.15.5.tar.xz DEBUG util.py:461: kernel-kabi-dw-6.15.5.tar.xz DEBUG util.py:461: kernel-local DEBUG util.py:461: kernel-ppc64le-debug-fedora.config DEBUG util.py:461: kernel-ppc64le-debug-rhel.config DEBUG util.py:461: kernel-ppc64le-fedora.config DEBUG util.py:461: kernel-ppc64le-rhel.config DEBUG util.py:461: kernel-riscv64-debug-fedora.config DEBUG util.py:461: kernel-riscv64-fedora.config DEBUG util.py:461: kernel-riscv64-rt-debug-fedora.config DEBUG util.py:461: kernel-riscv64-rt-fedora.config DEBUG util.py:461: kernel-s390x-debug-fedora.config DEBUG util.py:461: kernel-s390x-debug-rhel.config DEBUG util.py:461: kernel-s390x-fedora.config DEBUG util.py:461: kernel-s390x-rhel.config DEBUG util.py:461: kernel-s390x-zfcpdump-rhel.config DEBUG util.py:461: kernel-x86_64-automotive-debug-rhel.config DEBUG util.py:461: kernel-x86_64-automotive-rhel.config DEBUG util.py:461: kernel-x86_64-debug-fedora.config DEBUG util.py:461: kernel-x86_64-debug-rhel.config DEBUG util.py:461: kernel-x86_64-fedora.config DEBUG util.py:461: kernel-x86_64-rhel.config DEBUG util.py:461: kernel-x86_64-rt-debug-fedora.config DEBUG util.py:461: kernel-x86_64-rt-debug-rhel.config DEBUG util.py:461: kernel-x86_64-rt-fedora.config DEBUG util.py:461: kernel-x86_64-rt-rhel.config DEBUG util.py:461: kernel.changelog DEBUG util.py:461: kernel.spec DEBUG util.py:461: kvm_stat.logrotate DEBUG util.py:461: linux-6.15.5.tar.xz DEBUG util.py:461: linux-kernel-test.patch DEBUG util.py:461: merge.py DEBUG util.py:461: mod-denylist.sh DEBUG util.py:461: mod-sign.sh DEBUG util.py:461: nvidiagpuoot001.x509 DEBUG util.py:461: partial-clang-debug-snip.config DEBUG util.py:461: partial-clang-snip.config DEBUG util.py:461: partial-clang_lto-aarch64-debug-snip.config DEBUG util.py:461: partial-clang_lto-aarch64-snip.config DEBUG util.py:461: partial-clang_lto-x86_64-debug-snip.config DEBUG util.py:461: partial-clang_lto-x86_64-snip.config DEBUG util.py:461: partial-kgcov-debug-snip.config DEBUG util.py:461: partial-kgcov-snip.config DEBUG util.py:461: patch-6.15-redhat.patch DEBUG util.py:461: process_configs.sh DEBUG util.py:461: redhatsecureboot501.cer DEBUG util.py:461: redhatsecurebootca5.cer DEBUG util.py:461: rheldup3.x509 DEBUG util.py:461: rhelima.x509 DEBUG util.py:461: rhelima_centos.x509 DEBUG util.py:461: rhelimaca1.x509 DEBUG util.py:461: rhelkpatch1.x509 DEBUG util.py:461: rpminspect.yaml DEBUG util.py:461: uki_addons.json DEBUG util.py:461: uki_create_addons.py DEBUG util.py:461: x509.genkey.centos DEBUG util.py:461: x509.genkey.fedora DEBUG util.py:461: x509.genkey.rhel DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:551: Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.58jb9hvy:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11'] DEBUG util.py:556: Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', '71f12dbf819c44f8a3619eea72e2df86', '-D', '/var/lib/mock/f42-spacemit-83-30/root', '-a', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.58jb9hvy:/etc/resolv.conf', '--bind=/dev/btrfs-control', '--bind=/dev/mapper/control', '--bind=/dev/fuse', '--bind=/dev/loop-control', '--bind=/dev/loop0', '--bind=/dev/loop1', '--bind=/dev/loop2', '--bind=/dev/loop3', '--bind=/dev/loop4', '--bind=/dev/loop5', '--bind=/dev/loop6', '--bind=/dev/loop7', '--bind=/dev/loop8', '--bind=/dev/loop9', '--bind=/dev/loop10', '--bind=/dev/loop11', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/builddir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--resolv-conf=off', '/bin/sh', '-c', 'case $(rpmbuild --help) in *--noclean*) exit 0; esac; exit 1'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/proc DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'rprivate,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/proc DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/proc', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,nodev,noexec,nosuid,readonly,rprivate,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'rprivate,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/sys', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,nodev,noexec,nosuid,readonly,rprivate,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/shm DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30/root/dev/shm'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/dev/pts DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'devpts', '-o', 'gid=5,mode=0620,ptmxmode=0666,newinstance', 'devpts', '/var/lib/mock/f42-spacemit-83-30/root/dev/pts'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'bind', '/tmp/mock-selinux-plugin.9qc59_ln', '/var/lib/mock/f42-spacemit-83-30/root/proc/filesystems'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/sys/fs/selinux DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30/root/sys/fs/selinux'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-t', 'tmpfs', '-o', 'private,mode=0755', 'tmpfs', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'rbind', '/var/lib/mock/f42-spacemit-83-30/root', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/mount', '-n', '-o', 'remount,private,rbind', '--target', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG file_util.py:18: ensuring that dir exists: /var/lib/mock/f42-spacemit-83-30/root/installation-homedir DEBUG package_manager.py:295: ['/usr/bin/dnf5', 'builddep', '--installroot', '/var/lib/mock/f42-spacemit-83-30/root/', '/var/lib/mock/f42-spacemit-83-30/root//builddir/build/SRPMS/kernel-6.15.5-200.spacemit.fc42.src.rpm', '--setopt=deltarpm=False', '--setopt=allow_vendor_change=yes', '--allowerasing'] DEBUG util.py:634: child environment: None DEBUG util.py:551: Using nspawn with args ['--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.b75th254:/etc/resolv.conf'] DEBUG util.py:556: Executing command: ['/usr/bin/systemd-nspawn', '-q', '-M', 'e424241773a243e8b014ff7ece998424', '-D', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root', '-a', '--capability=cap_ipc_lock', '--bind=/tmp/mock-resolv.b75th254:/etc/resolv.conf', '--console=pipe', '--setenv=TERM=vt100', '--setenv=SHELL=/bin/bash', '--setenv=HOME=/var/lib/mock/f42-spacemit-83-30/root/installation-homedir', '--setenv=HOSTNAME=mock', '--setenv=PATH=/usr/bin:/bin:/usr/sbin:/sbin', '--setenv=PROMPT_COMMAND=printf "\\033]0;\\007"', '--setenv=PS1= \\s-\\v\\$ ', '--setenv=LANG=C.UTF-8', '--setenv=LC_MESSAGES=C.UTF-8', '--resolv-conf=off', '/usr/bin/dnf5', 'builddep', '--installroot', '/var/lib/mock/f42-spacemit-83-30/root/', '/var/lib/mock/f42-spacemit-83-30/root//builddir/build/SRPMS/kernel-6.15.5-200.spacemit.fc42.src.rpm', '--setopt=deltarpm=False', '--setopt=allow_vendor_change=yes', '--allowerasing', '--setopt=tsflags=nocontexts'] with env {'TERM': 'vt100', 'SHELL': '/bin/bash', 'HOME': '/var/lib/mock/f42-spacemit-83-30/root/installation-homedir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'PROMPT_COMMAND': 'printf "\\033]0;\\007"', 'PS1': ' \\s-\\v\\$ ', 'LANG': 'C.UTF-8', 'LC_MESSAGES': 'C.UTF-8', 'SYSTEMD_NSPAWN_TMPFS_TMP': '0', 'SYSTEMD_SECCOMP': '0'} and shell False DEBUG util.py:459: Updating and loading repositories: DEBUG util.py:459: build 100% | 26.1 KiB/s | 3.5 KiB | 00m00s DEBUG util.py:459: Repositories loaded. DEBUG util.py:459: Package "bash-5.2.37-1.fc42.riscv64" is already installed. DEBUG util.py:459: Package "binutils-2.44-3.fc42.riscv64" is already installed. DEBUG util.py:459: Package "bzip2-1.0.8-20.fc42.riscv64" is already installed. DEBUG util.py:459: Package "coreutils-9.6-4.fc42.riscv64" is already installed. DEBUG util.py:459: Package "diffutils-3.12-1.fc42.riscv64" is already installed. DEBUG util.py:459: Package "elfutils-0.193-2.fc42.riscv64" is already installed. DEBUG util.py:459: Package "findutils-1:4.10.0-5.fc42.riscv64" is already installed. DEBUG util.py:459: Package "gawk-5.3.1-1.fc42.riscv64" is already installed. DEBUG util.py:459: Package "redhat-rpm-config-342-4.fc42.noarch" is already installed. DEBUG util.py:459: Package "rpm-build-4.20.1-1.fc42.riscv64" is already installed. DEBUG util.py:459: Package "tar-2:1.35-5.fc42.riscv64" is already installed. DEBUG util.py:459: Package "which-2.23-2.fc42.riscv64" is already installed. DEBUG util.py:459: Package "xz-1:5.8.1-2.fc42.riscv64" is already installed. DEBUG util.py:459: Package "zstd-1.5.7-1.fc42.riscv64" is already installed. DEBUG util.py:461: Package Arch Version Repository Size DEBUG util.py:461: Installing: DEBUG util.py:461: asciidoc noarch 10.2.0-12.fc42 build 1.7 MiB DEBUG util.py:461: audit-libs-devel riscv64 4.0.3-2.fc42 build 97.2 KiB DEBUG util.py:461: bc riscv64 1.08.1-2.fc42 build 233.0 KiB DEBUG util.py:461: bindgen-cli riscv64 0.71.1-1.fc42 build 5.2 MiB DEBUG util.py:461: binutils-devel riscv64 2.44-3.fc42 build 99.9 MiB DEBUG util.py:461: bison riscv64 3.8.2-9.fc41 build 3.5 MiB DEBUG util.py:461: bpftool riscv64 7.5.0-3.fc42 build 720.8 KiB DEBUG util.py:461: clang riscv64 20.1.5-1.0.riscv64.fc42 build 338.7 KiB DEBUG util.py:461: clippy riscv64 1.87.0-2.fc42 build 12.6 MiB DEBUG util.py:461: dracut riscv64 105-3.fc42 build 1.9 MiB DEBUG util.py:461: dwarves riscv64 1.30-1.fc42 build 395.7 KiB DEBUG util.py:461: elfutils-devel riscv64 0.193-2.fc42 build 195.8 KiB DEBUG util.py:461: flex riscv64 2.6.4-19.fc42 build 925.8 KiB DEBUG util.py:461: fuse-devel riscv64 2.9.9-23.fc42 build 124.4 KiB DEBUG util.py:461: gcc riscv64 15.1.1-2.fc42 build 128.9 MiB DEBUG util.py:461: gcc-c++ riscv64 15.1.1-2.fc42 build 51.8 MiB DEBUG util.py:461: gettext riscv64 0.23.1-2.fc42 build 5.1 MiB DEBUG util.py:461: git-core riscv64 2.49.0-1.fc42 build 32.0 MiB DEBUG util.py:461: glibc-static riscv64 2.41-5.0.riscv64.fc42 build 30.2 MiB DEBUG util.py:461: hostname riscv64 3.25-2.fc42 build 41.1 KiB DEBUG util.py:461: java-21-openjdk-devel riscv64 1:21.0.6.0.7-7.1.riscv64.fc42 build 11.1 MiB DEBUG util.py:461: kernel-rpm-macros noarch 205-25.fc42 build 36.5 KiB DEBUG util.py:461: kmod riscv64 33-3.fc42 build 228.1 KiB DEBUG util.py:461: libbabeltrace-devel riscv64 1.5.11-10.fc42 build 99.9 KiB DEBUG util.py:461: libbpf-devel riscv64 2:1.5.0-2.fc42 build 395.0 KiB DEBUG util.py:461: libcap-devel riscv64 2.73-2.fc42 build 38.7 KiB DEBUG util.py:461: libcap-ng-devel riscv64 0.8.5-4.fc42 build 16.8 KiB DEBUG util.py:461: libkcapi-hmaccalc riscv64 1.5.0-5.fc42 build 175.0 B DEBUG util.py:461: libmnl-devel riscv64 1.0.5-7.fc42 build 200.2 KiB DEBUG util.py:461: libtraceevent-devel riscv64 1.8.4-3.fc42 build 29.1 KiB DEBUG util.py:461: libtracefs-devel riscv64 1.8.1-2.fc42 build 27.4 KiB DEBUG util.py:461: lld riscv64 20.1.5-1.0.riscv64.fc42 build 44.6 KiB DEBUG util.py:461: llvm-devel riscv64 20.1.5-1.0.riscv64.fc42 build 28.9 MiB DEBUG util.py:461: lvm2 riscv64 2.03.30-3.fc42 build 3.3 MiB DEBUG util.py:461: m4 riscv64 1.4.19-12.fc42 build 594.2 KiB DEBUG util.py:461: make riscv64 1:4.4.1-10.fc42 build 1.8 MiB DEBUG util.py:461: ncurses-devel riscv64 6.5-5.20250125.fc42 build 883.7 KiB DEBUG util.py:461: net-tools riscv64 2.0-0.73.20160912git.fc42 build 962.6 KiB DEBUG util.py:461: newt-devel riscv64 0.52.25-1.fc42 build 124.5 KiB DEBUG util.py:461: numactl-devel riscv64 2.0.19-2.fc42 build 26.7 KiB DEBUG util.py:461: openssl riscv64 1:3.2.4-3.fc42 build 1.7 MiB DEBUG util.py:461: openssl-devel riscv64 1:3.2.4-3.fc42 build 4.3 MiB DEBUG util.py:461: pciutils-devel riscv64 3.13.0-7.fc42 build 107.3 KiB DEBUG util.py:461: perl-Carp noarch 1.54-512.fc42 build 46.6 KiB DEBUG util.py:461: perl-ExtUtils-Embed noarch 1.35-517.fc42 build 15.5 KiB DEBUG util.py:461: perl-devel riscv64 4:5.40.2-517.fc42 build 8.0 MiB DEBUG util.py:461: perl-generators noarch 1.16-7.fc42 build 21.8 KiB DEBUG util.py:461: perl-interpreter riscv64 4:5.40.2-517.fc42 build 118.0 KiB DEBUG util.py:461: python3 riscv64 3.13.3-2.fc42 build 28.4 KiB DEBUG util.py:461: python3-devel riscv64 3.13.3-2.fc42 build 1.8 MiB DEBUG util.py:461: python3-docutils noarch 0.21.2-2.fc42 build 4.9 MiB DEBUG util.py:461: python3-jsonschema noarch 4.23.0-2.fc42 build 886.2 KiB DEBUG util.py:461: python3-pip noarch 24.3.1-2.fc42 build 11.3 MiB DEBUG util.py:461: python3-pyyaml riscv64 6.0.2-2.fc42 build 723.5 KiB DEBUG util.py:461: python3-setuptools noarch 74.1.3-5.fc42 build 8.4 MiB DEBUG util.py:461: rsync riscv64 3.4.1-3.fc42 build 786.6 KiB DEBUG util.py:461: rust riscv64 1.87.0-2.fc42 build 92.6 MiB DEBUG util.py:461: rust-src noarch 1.87.0-2.fc42 build 33.0 MiB DEBUG util.py:461: rustfmt riscv64 1.87.0-2.fc42 build 6.6 MiB DEBUG util.py:461: systemd-boot-unsigned riscv64 257.6-1.fc42 build 217.7 KiB DEBUG util.py:461: systemd-udev riscv64 257.6-1.fc42 build 11.8 MiB DEBUG util.py:461: systemd-ukify noarch 257.6-1.fc42 build 90.3 KiB DEBUG util.py:461: tpm2-tools riscv64 5.7-3.fc42 build 1.5 MiB DEBUG util.py:461: xmlto riscv64 0.0.29-2.fc42 build 116.1 KiB DEBUG util.py:461: xz-devel riscv64 1:5.8.1-2.fc42 build 258.8 KiB DEBUG util.py:461: zlib-ng-compat-devel riscv64 2.2.4-3.fc42 build 107.0 KiB DEBUG util.py:461: Installing dependencies: DEBUG util.py:461: abattis-cantarell-vf-fonts noarch 0.301-14.fc42 build 192.7 KiB DEBUG util.py:461: adobe-mappings-cmap noarch 20231115-2.fc42 build 15.2 MiB DEBUG util.py:461: adobe-mappings-cmap-deprecated noarch 20231115-2.fc42 build 582.1 KiB DEBUG util.py:461: adobe-mappings-pdf noarch 20190401-9.fc42 build 4.4 MiB DEBUG util.py:461: alsa-lib riscv64 1.2.14-2.fc42 build 1.4 MiB DEBUG util.py:461: annobin-docs noarch 12.94-1.fc42 build 98.9 KiB DEBUG util.py:461: annobin-plugin-gcc riscv64 12.94-1.fc42 build 993.2 KiB DEBUG util.py:461: authselect riscv64 1.5.1-1.fc42 build 149.6 KiB DEBUG util.py:461: authselect-libs riscv64 1.5.1-1.fc42 build 819.3 KiB DEBUG util.py:461: avahi-libs riscv64 0.9~rc2-2.fc42 build 157.4 KiB DEBUG util.py:461: boost-regex riscv64 1.83.0-12.fc42 build 259.9 KiB DEBUG util.py:461: cairo riscv64 1.18.2-3.fc42 build 1.7 MiB DEBUG util.py:461: cairo-gobject riscv64 1.18.2-3.fc42 build 38.8 KiB DEBUG util.py:461: cargo riscv64 1.87.0-2.fc42 build 20.4 MiB DEBUG util.py:461: clang-libs riscv64 20.1.5-1.0.riscv64.fc42 build 110.0 MiB DEBUG util.py:461: clang-resource-filesystem riscv64 20.1.5-1.0.riscv64.fc42 build 15.3 KiB DEBUG util.py:461: cmake-filesystem riscv64 3.31.6-2.1.riscv64.fc42 build 0.0 B DEBUG util.py:461: cpp riscv64 15.1.1-2.fc42 build 48.8 MiB DEBUG util.py:461: cracklib riscv64 2.9.11-7.fc42 build 233.2 KiB DEBUG util.py:461: cryptsetup-libs riscv64 2.7.5-2.fc42 build 2.3 MiB DEBUG util.py:461: ctags riscv64 6.1.0-2.fc42 build 3.7 MiB DEBUG util.py:461: cups-filesystem noarch 1:2.4.12-3.fc42 build 0.0 B DEBUG util.py:461: cups-libs riscv64 1:2.4.12-3.fc42 build 638.2 KiB DEBUG util.py:461: dbus riscv64 1:1.16.0-3.fc42 build 0.0 B DEBUG util.py:461: dbus-broker riscv64 36-5.fc42 build 380.7 KiB DEBUG util.py:461: dbus-common noarch 1:1.16.0-3.fc42 build 11.2 KiB DEBUG util.py:461: dbus-libs riscv64 1:1.16.0-3.fc42 build 339.9 KiB DEBUG util.py:461: default-fonts-core-sans noarch 4.2-4.fc42 build 11.9 KiB DEBUG util.py:461: device-mapper riscv64 1.02.204-3.fc42 build 340.2 KiB DEBUG util.py:461: device-mapper-event riscv64 1.02.204-3.fc42 build 46.4 KiB DEBUG util.py:461: device-mapper-event-libs riscv64 1.02.204-3.fc42 build 53.3 KiB DEBUG util.py:461: device-mapper-libs riscv64 1.02.204-3.fc42 build 390.0 KiB DEBUG util.py:461: device-mapper-persistent-data riscv64 1.1.0-3.fc42 build 2.8 MiB DEBUG util.py:461: docbook-dtds noarch 1.0-88.fc42 build 8.3 MiB DEBUG util.py:461: docbook-style-xsl noarch 1.79.2-24.fc42 build 15.6 MiB DEBUG util.py:461: elfutils-libelf-devel riscv64 0.193-2.fc42 build 50.0 KiB DEBUG util.py:461: expat riscv64 2.7.1-1.fc42 build 273.7 KiB DEBUG util.py:461: fontconfig riscv64 2.16.0-2.fc42 build 738.9 KiB DEBUG util.py:461: fonts-filesystem noarch 1:2.0.5-22.fc42 build 0.0 B DEBUG util.py:461: freetype riscv64 2.13.3-2.fc42 build 801.7 KiB DEBUG util.py:461: fribidi riscv64 1.0.16-2.fc42 build 193.8 KiB DEBUG util.py:461: fuse-libs riscv64 2.9.9-23.fc42 build 284.4 KiB DEBUG util.py:461: gcc-plugin-annobin riscv64 15.1.1-2.fc42 build 48.8 KiB DEBUG util.py:461: gd riscv64 2.3.3-18.fc42 build 407.5 KiB DEBUG util.py:461: gdbm riscv64 1:1.23-9.fc42 build 468.6 KiB DEBUG util.py:461: gdk-pixbuf2 riscv64 2.42.12-10.fc42 build 2.5 MiB DEBUG util.py:461: gettext-envsubst riscv64 0.23.1-2.fc42 build 79.3 KiB DEBUG util.py:461: gettext-libs riscv64 0.23.1-2.fc42 build 2.0 MiB DEBUG util.py:461: gettext-runtime riscv64 0.23.1-2.fc42 build 452.5 KiB DEBUG util.py:461: glib2 riscv64 2.84.2-1.fc42 build 14.8 MiB DEBUG util.py:461: glib2-devel riscv64 2.84.2-1.fc42 build 15.8 MiB DEBUG util.py:461: glibc-devel riscv64 2.41-5.0.riscv64.fc42 build 2.2 MiB DEBUG util.py:461: gnupg2 riscv64 2.4.7-2.fc42 build 11.2 MiB DEBUG util.py:461: gnutls riscv64 3.8.8-3.fc42 build 3.1 MiB DEBUG util.py:461: google-droid-sans-fonts noarch 20200215-22.fc42 build 6.3 MiB DEBUG util.py:461: google-noto-fonts-common noarch 20250301-1.fc42 build 17.7 KiB DEBUG util.py:461: google-noto-sans-vf-fonts noarch 20250301-1.fc42 build 1.4 MiB DEBUG util.py:461: gpgme riscv64 1.24.2-1.fc42 build 554.9 KiB DEBUG util.py:461: gpgmepp riscv64 1.24.2-1.fc42 build 440.2 KiB DEBUG util.py:461: graphite2 riscv64 1.3.14-18.fc42 build 193.4 KiB DEBUG util.py:461: graphviz riscv64 12.2.1-8.fc42 build 21.1 MiB DEBUG util.py:461: graphviz-libs riscv64 12.2.1-8.fc42 build 1.2 MiB DEBUG util.py:461: groff-base riscv64 1.23.0-8.fc42 build 4.4 MiB DEBUG util.py:461: gts riscv64 0.7.6-50.20121130.fc42 build 576.6 KiB DEBUG util.py:461: harfbuzz riscv64 10.4.0-1.fc42 build 3.0 MiB DEBUG util.py:461: hwdata noarch 0.396-1.fc42 build 9.5 MiB DEBUG util.py:461: java-21-openjdk riscv64 1:21.0.6.0.7-7.1.riscv64.fc42 build 1.0 MiB DEBUG util.py:461: java-21-openjdk-headless riscv64 1:21.0.6.0.7-7.1.riscv64.fc42 build 199.4 MiB DEBUG util.py:461: javapackages-filesystem noarch 6.4.0-5.fc42 build 2.0 KiB DEBUG util.py:461: jbig2dec-libs riscv64 0.20-6.fc42 build 152.6 KiB DEBUG util.py:461: jbigkit-libs riscv64 2.1-31.fc42 build 108.8 KiB DEBUG util.py:461: kbd riscv64 2.7.1-3.fc42 build 1.6 MiB DEBUG util.py:461: kbd-legacy noarch 2.7.1-3.fc42 build 573.6 KiB DEBUG util.py:461: kbd-misc noarch 2.7.1-3.fc42 build 2.5 MiB DEBUG util.py:461: kernel-headers riscv64 6.14.3-300.fc42 build 6.4 MiB DEBUG util.py:461: kmod-libs riscv64 33-3.fc42 build 135.4 KiB DEBUG util.py:461: lasi riscv64 1.1.3-16.fc42 build 117.8 KiB DEBUG util.py:461: lcms2 riscv64 2.16-5.fc42 build 408.4 KiB DEBUG util.py:461: less riscv64 679-1.fc42 build 435.6 KiB DEBUG util.py:461: libICE riscv64 1.1.2-2.fc42 build 186.0 KiB DEBUG util.py:461: libSM riscv64 1.2.5-2.fc42 build 96.7 KiB DEBUG util.py:461: libX11 riscv64 1.8.11-1.fc42 build 1.2 MiB DEBUG util.py:461: libX11-common noarch 1.8.11-1.fc42 build 1.2 MiB DEBUG util.py:461: libXau riscv64 1.0.12-2.fc42 build 68.6 KiB DEBUG util.py:461: libXcomposite riscv64 0.4.6-5.fc42 build 40.2 KiB DEBUG util.py:461: libXext riscv64 1.3.6-3.fc42 build 85.5 KiB DEBUG util.py:461: libXft riscv64 2.3.8-8.fc42 build 152.2 KiB DEBUG util.py:461: libXi riscv64 1.8.2-2.fc42 build 68.2 KiB DEBUG util.py:461: libXpm riscv64 3.5.17-5.fc42 build 136.4 KiB DEBUG util.py:461: libXrender riscv64 0.9.12-2.fc42 build 45.7 KiB DEBUG util.py:461: libXt riscv64 1.3.1-2.fc42 build 388.9 KiB DEBUG util.py:461: libXtst riscv64 1.2.5-2.fc42 build 33.2 KiB DEBUG util.py:461: libaio riscv64 0.3.111-21.fc42 build 48.0 KiB DEBUG util.py:461: libaom riscv64 3.12.0-1.fc42 build 2.7 MiB DEBUG util.py:461: libasan riscv64 15.1.1-2.fc42 build 1.5 MiB DEBUG util.py:461: libassuan riscv64 2.5.7-3.fc42 build 159.8 KiB DEBUG util.py:461: libatomic riscv64 15.1.1-2.fc42 build 24.2 KiB DEBUG util.py:461: libavif riscv64 1.1.1-1.fc42 build 198.8 KiB DEBUG util.py:461: libb2 riscv64 0.98.1-13.fc42 build 45.7 KiB DEBUG util.py:461: libbabeltrace riscv64 1.5.11-10.fc42 build 519.8 KiB DEBUG util.py:461: libblkid-devel riscv64 2.40.4-7.fc42 build 44.9 KiB DEBUG util.py:461: libbpf riscv64 2:1.5.0-2.fc42 build 382.2 KiB DEBUG util.py:461: libcbor riscv64 0.11.0-3.fc42 build 73.5 KiB DEBUG util.py:461: libdatrie riscv64 0.2.13-11.fc42 build 62.2 KiB DEBUG util.py:461: libdav1d riscv64 1.5.1-1.fc42 build 529.5 KiB DEBUG util.py:461: libdwarves1 riscv64 1.30-1.fc42 build 581.2 KiB DEBUG util.py:461: libedit riscv64 3.1-55.20250104cvs.fc42 build 228.2 KiB DEBUG util.py:461: libedit-devel riscv64 3.1-55.20250104cvs.fc42 build 59.4 KiB DEBUG util.py:461: libffi-devel riscv64 3.4.6-5.0.riscv64.fc42 build 29.5 KiB DEBUG util.py:461: libfido2 riscv64 1.15.0-3.fc42 build 226.8 KiB DEBUG util.py:461: libfontenc riscv64 1.1.8-3.fc42 build 66.4 KiB DEBUG util.py:461: libgcrypt riscv64 1.11.0-3.fc41 build 1.1 MiB DEBUG util.py:461: libgit2 riscv64 1.9.0-4.fc42 build 1.2 MiB DEBUG util.py:461: libgpg-error riscv64 1.51-2.fc42 build 878.2 KiB DEBUG util.py:461: libgs riscv64 10.05.1-1.fc42 build 23.6 MiB DEBUG util.py:461: libicu riscv64 76.1-4.fc42 build 36.1 MiB DEBUG util.py:461: libijs riscv64 0.35-24.fc42 build 61.3 KiB DEBUG util.py:461: libimagequant riscv64 4.0.3-7.fc42 build 637.4 KiB DEBUG util.py:461: libjpeg-turbo riscv64 3.1.0-2.fc42 build 620.9 KiB DEBUG util.py:461: libkcapi riscv64 1.5.0-5.fc42 build 90.6 KiB DEBUG util.py:461: libkcapi-hasher riscv64 1.5.0-5.fc42 build 37.3 KiB DEBUG util.py:461: libksba riscv64 1.6.7-3.fc42 build 395.0 KiB DEBUG util.py:461: liblerc riscv64 4.0.0-8.fc42 build 556.0 KiB DEBUG util.py:461: libmnl riscv64 1.0.5-7.fc42 build 50.8 KiB DEBUG util.py:461: libmount-devel riscv64 2.40.4-7.fc42 build 63.5 KiB DEBUG util.py:461: libmpc riscv64 1.3.1-7.fc42 build 144.3 KiB DEBUG util.py:461: libnsl2 riscv64 2.0.1-3.fc42 build 57.6 KiB DEBUG util.py:461: libpaper riscv64 1:2.1.1-8.fc42 build 48.5 KiB DEBUG util.py:461: libpng riscv64 2:1.6.44-2.fc42 build 209.9 KiB DEBUG util.py:461: libpwquality riscv64 1.4.5-12.fc42 build 404.1 KiB DEBUG util.py:461: librsvg2 riscv64 2.60.0-1.fc42 build 5.0 MiB DEBUG util.py:461: libseccomp riscv64 2.5.5-2.fc42 build 169.5 KiB DEBUG util.py:461: libselinux-devel riscv64 3.8-2.fc42 build 126.8 KiB DEBUG util.py:461: libsepol-devel riscv64 3.8-1.fc42 build 120.8 KiB DEBUG util.py:461: libssh2 riscv64 1.11.1-3.fc42 build 283.0 KiB DEBUG util.py:461: libstdc++-devel riscv64 15.1.1-2.fc42 build 32.7 MiB DEBUG util.py:461: libtextstyle riscv64 0.23.1-2.fc42 build 280.9 KiB DEBUG util.py:461: libthai riscv64 0.1.29-10.fc42 build 779.2 KiB DEBUG util.py:461: libtiff riscv64 4.7.0-3.fc42 build 557.4 KiB DEBUG util.py:461: libtirpc riscv64 1.3.6-1.rc3.fc42.2 build 194.5 KiB DEBUG util.py:461: libtraceevent riscv64 1.8.4-3.fc42 build 1.4 MiB DEBUG util.py:461: libtracefs riscv64 1.8.1-2.fc42 build 2.1 MiB DEBUG util.py:461: libubsan riscv64 15.1.1-2.fc42 build 383.2 KiB DEBUG util.py:461: libusb1 riscv64 1.0.28-2.fc42 build 162.4 KiB DEBUG util.py:461: libuuid-devel riscv64 2.40.4-7.fc42 build 40.9 KiB DEBUG util.py:461: libwebp riscv64 1.5.0-2.fc42 build 585.4 KiB DEBUG util.py:461: libxcb riscv64 1.17.0-5.fc42 build 1.1 MiB DEBUG util.py:461: libxcrypt-devel riscv64 4.4.38-7.fc42 build 30.8 KiB DEBUG util.py:461: libxcrypt-static riscv64 4.4.38-7.fc42 build 1.8 MiB DEBUG util.py:461: libxslt riscv64 1.1.43-1.fc42 build 415.3 KiB DEBUG util.py:461: libyaml riscv64 0.2.5-16.fc42 build 114.2 KiB DEBUG util.py:461: libyuv riscv64 0-0.56.20240704git96bbdb5.fc42 build 336.6 KiB DEBUG util.py:461: libzstd-devel riscv64 1.5.7-1.fc42 build 208.0 KiB DEBUG util.py:461: lksctp-tools riscv64 1.0.20-2.fc42 build 253.2 KiB DEBUG util.py:461: lld-libs riscv64 20.1.5-1.0.riscv64.fc42 build 5.6 MiB DEBUG util.py:461: llhttp riscv64 9.2.1-5.fc42 build 76.2 KiB DEBUG util.py:461: llvm riscv64 20.1.5-1.0.riscv64.fc42 build 79.4 MiB DEBUG util.py:461: llvm-filesystem riscv64 20.1.5-1.0.riscv64.fc42 build 0.0 B DEBUG util.py:461: llvm-googletest riscv64 20.1.5-1.0.riscv64.fc42 build 6.2 MiB DEBUG util.py:461: llvm-libs riscv64 20.1.5-1.0.riscv64.fc42 build 120.6 MiB DEBUG util.py:461: llvm-static riscv64 20.1.5-1.0.riscv64.fc42 build 1.0 GiB DEBUG util.py:461: llvm-test riscv64 20.1.5-1.0.riscv64.fc42 build 1.9 MiB DEBUG util.py:461: lvm2-libs riscv64 2.03.30-3.fc42 build 2.3 MiB DEBUG util.py:461: mkfontscale riscv64 1.2.3-2.fc42 build 49.0 KiB DEBUG util.py:461: mpdecimal riscv64 4.0.1-1.fc42 build 204.9 KiB DEBUG util.py:461: ncurses riscv64 6.5-5.20250125.fc42 build 606.6 KiB DEBUG util.py:461: ncurses-c++-libs riscv64 6.5-5.20250125.fc42 build 151.5 KiB DEBUG util.py:461: netpbm riscv64 11.10.00-1.fc42 build 573.2 KiB DEBUG util.py:461: nettle riscv64 3.10.1-1.fc42 build 744.2 KiB DEBUG util.py:461: newt riscv64 0.52.25-1.fc42 build 197.0 KiB DEBUG util.py:461: npth riscv64 1.8-2.fc42 build 49.2 KiB DEBUG util.py:461: nspr riscv64 4.36.0-8.fc42 build 306.7 KiB DEBUG util.py:461: nss riscv64 3.111.0-2.fc42 build 1.7 MiB DEBUG util.py:461: nss-softokn riscv64 3.111.0-2.fc42 build 1.8 MiB DEBUG util.py:461: nss-softokn-freebl riscv64 3.111.0-2.fc42 build 739.0 KiB DEBUG util.py:461: nss-sysinit riscv64 3.111.0-2.fc42 build 17.8 KiB DEBUG util.py:461: nss-util riscv64 3.111.0-2.fc42 build 220.5 KiB DEBUG util.py:461: numactl-libs riscv64 2.0.19-2.fc42 build 56.9 KiB DEBUG util.py:461: openjpeg riscv64 2.5.3-6.fc42 build 383.4 KiB DEBUG util.py:461: openssh riscv64 9.9p1-11.fc42 build 1.4 MiB DEBUG util.py:461: openssh-clients riscv64 9.9p1-11.fc42 build 3.4 MiB DEBUG util.py:461: pam riscv64 1.7.0-6.fc42 build 1.6 MiB DEBUG util.py:461: pango riscv64 1.56.3-1.fc42 build 966.7 KiB DEBUG util.py:461: pciutils riscv64 3.13.0-7.fc42 build 231.9 KiB DEBUG util.py:461: pciutils-libs riscv64 3.13.0-7.fc42 build 90.8 KiB DEBUG util.py:461: pcre2-devel riscv64 10.45-1.fc42 build 2.1 MiB DEBUG util.py:461: pcre2-utf16 riscv64 10.45-1.fc42 build 541.7 KiB DEBUG util.py:461: pcre2-utf32 riscv64 10.45-1.fc42 build 517.6 KiB DEBUG util.py:461: perl-AutoLoader noarch 5.74-517.fc42 build 20.5 KiB DEBUG util.py:461: perl-AutoSplit noarch 5.74-517.fc42 build 23.1 KiB DEBUG util.py:461: perl-B riscv64 1.89-517.fc42 build 505.6 KiB DEBUG util.py:461: perl-Benchmark noarch 1.25-517.fc42 build 36.3 KiB DEBUG util.py:461: perl-Class-Struct noarch 0.68-517.fc42 build 25.4 KiB DEBUG util.py:461: perl-Data-Dumper riscv64 2.189-513.fc42 build 103.3 KiB DEBUG util.py:461: perl-Devel-PPPort riscv64 3.72-513.fc42 build 875.4 KiB DEBUG util.py:461: perl-Digest noarch 1.20-512.fc42 build 35.3 KiB DEBUG util.py:461: perl-Digest-MD5 riscv64 2.59-6.fc42 build 59.4 KiB DEBUG util.py:461: perl-DynaLoader riscv64 1.56-517.fc42 build 32.1 KiB DEBUG util.py:461: perl-Encode riscv64 4:3.21-512.fc42 build 9.6 MiB DEBUG util.py:461: perl-Errno riscv64 1.38-517.fc42 build 8.3 KiB DEBUG util.py:461: perl-Exporter noarch 5.78-512.fc42 build 54.3 KiB DEBUG util.py:461: perl-ExtUtils-Command noarch 2:7.76-1.fc42 build 9.6 KiB DEBUG util.py:461: perl-ExtUtils-Constant noarch 0.25-517.fc42 build 85.8 KiB DEBUG util.py:461: perl-ExtUtils-Install noarch 2.22-512.fc42 build 85.5 KiB DEBUG util.py:461: perl-ExtUtils-MakeMaker noarch 2:7.76-1.fc42 build 739.6 KiB DEBUG util.py:461: perl-ExtUtils-Manifest noarch 1:1.75-512.fc42 build 84.8 KiB DEBUG util.py:461: perl-ExtUtils-ParseXS noarch 1:3.51-512.fc42 build 399.6 KiB DEBUG util.py:461: perl-Fcntl riscv64 1.18-517.fc42 build 48.6 KiB DEBUG util.py:461: perl-Fedora-VSP noarch 0.001-36.fc42 build 39.7 KiB DEBUG util.py:461: perl-File-Basename noarch 2.86-517.fc42 build 14.0 KiB DEBUG util.py:461: perl-File-Compare noarch 1.100.800-517.fc42 build 5.6 KiB DEBUG util.py:461: perl-File-Copy noarch 2.41-517.fc42 build 19.6 KiB DEBUG util.py:461: perl-File-Find noarch 1.44-517.fc42 build 41.9 KiB DEBUG util.py:461: perl-File-Path noarch 2.18-512.fc42 build 63.5 KiB DEBUG util.py:461: perl-File-Temp noarch 1:0.231.100-512.fc42 build 162.3 KiB DEBUG util.py:461: perl-File-stat noarch 1.14-517.fc42 build 12.5 KiB DEBUG util.py:461: perl-FileHandle noarch 2.05-517.fc42 build 9.3 KiB DEBUG util.py:461: perl-Getopt-Long noarch 1:2.58-3.fc42 build 144.5 KiB DEBUG util.py:461: perl-Getopt-Std noarch 1.14-517.fc42 build 11.2 KiB DEBUG util.py:461: perl-HTTP-Tiny noarch 0.090-2.fc42 build 154.4 KiB DEBUG util.py:461: perl-IO riscv64 1.55-517.fc42 build 142.7 KiB DEBUG util.py:461: perl-IO-Socket-IP noarch 0.43-2.fc42 build 100.3 KiB DEBUG util.py:461: perl-IO-Socket-SSL noarch 2.089-2.fc42 build 703.3 KiB DEBUG util.py:461: perl-IPC-Open3 noarch 1.22-517.fc42 build 22.5 KiB DEBUG util.py:461: perl-MIME-Base32 noarch 1.303-23.fc42 build 30.7 KiB DEBUG util.py:461: perl-MIME-Base64 riscv64 3.16-512.fc42 build 41.7 KiB DEBUG util.py:461: perl-Net-SSLeay riscv64 1.94-8.fc42 build 1.3 MiB DEBUG util.py:461: perl-POSIX riscv64 2.20-517.fc42 build 230.8 KiB DEBUG util.py:461: perl-PathTools riscv64 3.91-513.fc42 build 175.7 KiB DEBUG util.py:461: perl-Pod-Escapes noarch 1:1.07-512.fc42 build 24.9 KiB DEBUG util.py:461: perl-Pod-Perldoc noarch 3.28.01-513.fc42 build 163.7 KiB DEBUG util.py:461: perl-Pod-Simple noarch 1:3.45-512.fc42 build 560.8 KiB DEBUG util.py:461: perl-Pod-Usage noarch 4:2.05-1.fc42 build 86.3 KiB DEBUG util.py:461: perl-Scalar-List-Utils riscv64 5:1.69-1.fc42 build 136.5 KiB DEBUG util.py:461: perl-SelectSaver noarch 1.02-517.fc42 build 2.2 KiB DEBUG util.py:461: perl-Socket riscv64 4:2.038-512.fc42 build 123.7 KiB DEBUG util.py:461: perl-Storable riscv64 1:3.32-512.fc42 build 212.0 KiB DEBUG util.py:461: perl-Symbol noarch 1.09-517.fc42 build 6.8 KiB DEBUG util.py:461: perl-Term-ANSIColor noarch 5.01-513.fc42 build 97.5 KiB DEBUG util.py:461: perl-Term-Cap noarch 1.18-512.fc42 build 29.3 KiB DEBUG util.py:461: perl-Test-Harness noarch 1:3.50-2.fc42 build 559.6 KiB DEBUG util.py:461: perl-Text-ParseWords noarch 3.31-512.fc42 build 13.6 KiB DEBUG util.py:461: perl-Text-Tabs+Wrap noarch 2024.001-512.fc42 build 22.6 KiB DEBUG util.py:461: perl-Time-Local noarch 2:1.350-512.fc42 build 68.9 KiB DEBUG util.py:461: perl-URI noarch 5.31-2.fc42 build 257.0 KiB DEBUG util.py:461: perl-base noarch 2.27-517.fc42 build 12.5 KiB DEBUG util.py:461: perl-constant noarch 1.33-513.fc42 build 26.2 KiB DEBUG util.py:461: perl-if noarch 0.61.000-517.fc42 build 5.8 KiB DEBUG util.py:461: perl-lib riscv64 0.65-517.fc42 build 8.5 KiB DEBUG util.py:461: perl-libnet noarch 3.15-513.fc42 build 289.4 KiB DEBUG util.py:461: perl-libs riscv64 4:5.40.2-517.fc42 build 9.6 MiB DEBUG util.py:461: perl-locale noarch 1.12-517.fc42 build 6.5 KiB DEBUG util.py:461: perl-macros noarch 4:5.40.2-517.fc42 build 5.5 KiB DEBUG util.py:461: perl-mro riscv64 1.29-517.fc42 build 37.2 KiB DEBUG util.py:461: perl-overload noarch 1.37-517.fc42 build 71.5 KiB DEBUG util.py:461: perl-overloading noarch 0.02-517.fc42 build 4.8 KiB DEBUG util.py:461: perl-parent noarch 1:0.244-2.fc42 build 10.3 KiB DEBUG util.py:461: perl-podlators noarch 1:6.0.2-3.fc42 build 317.5 KiB DEBUG util.py:461: perl-vars noarch 1.05-517.fc42 build 3.9 KiB DEBUG util.py:461: perl-version riscv64 9:0.99.33-2.fc42 build 124.5 KiB DEBUG util.py:461: pixman riscv64 0.44.2-2.fc42 build 447.5 KiB DEBUG util.py:461: poppler riscv64 25.02.0-1.fc42 build 3.9 MiB DEBUG util.py:461: poppler-data noarch 0.4.11-9.fc42 build 12.3 MiB DEBUG util.py:461: poppler-glib riscv64 25.02.0-1.fc42 build 611.8 KiB DEBUG util.py:461: popt-devel riscv64 1.19-8.fc42 build 29.0 KiB DEBUG util.py:461: procps-ng riscv64 4.0.4-6.fc42 build 1.1 MiB DEBUG util.py:461: pyproject-rpm-macros noarch 1.18.1-1.fc42 build 114.5 KiB DEBUG util.py:461: python-pip-wheel noarch 24.3.1-2.fc42 build 1.2 MiB DEBUG util.py:461: python-rpm-macros noarch 3.13-4.fc42 build 22.1 KiB DEBUG util.py:461: python3-attrs noarch 25.1.0-1.fc42 build 396.3 KiB DEBUG util.py:461: python3-cffi riscv64 1.17.1-2.fc42 build 1.3 MiB DEBUG util.py:461: python3-cryptography riscv64 44.0.0-3.fc42 build 4.9 MiB DEBUG util.py:461: python3-jsonschema-specifications noarch 2024.10.1-2.fc42 build 46.2 KiB DEBUG util.py:461: python3-libs riscv64 3.13.3-2.fc42 build 39.7 MiB DEBUG util.py:461: python3-packaging noarch 24.2-3.fc42 build 555.7 KiB DEBUG util.py:461: python3-pefile noarch 2024.8.26-2.fc42 build 651.3 KiB DEBUG util.py:461: python3-ply noarch 3.11-26.fc42 build 565.1 KiB DEBUG util.py:461: python3-pycparser noarch 2.20-19.fc42 build 800.6 KiB DEBUG util.py:461: python3-pyparsing noarch 3.1.2-8.fc42 build 996.4 KiB DEBUG util.py:461: python3-referencing noarch 0.36.2-1.fc42 build 320.9 KiB DEBUG util.py:461: python3-rpds-py riscv64 0.25.0-1.fc42 build 743.9 KiB DEBUG util.py:461: python3-rpm-generators noarch 14-12.fc42 build 81.7 KiB DEBUG util.py:461: python3-rpm-macros noarch 3.13-4.fc42 build 6.4 KiB DEBUG util.py:461: python3-zstandard riscv64 0.23.0-2.fc42 build 2.2 MiB DEBUG util.py:461: rav1e-libs riscv64 0.7.1-5.fc42 build 1.7 MiB DEBUG util.py:461: rsvg-pixbuf-loader riscv64 2.60.0-1.fc42 build 305.7 KiB DEBUG util.py:461: rust-std-static riscv64 1.87.0-2.fc42 build 163.3 MiB DEBUG util.py:461: sgml-common noarch 0.6.3-66.fc42 build 168.1 KiB DEBUG util.py:461: shared-mime-info riscv64 2.3-7.fc42 build 5.2 MiB DEBUG util.py:461: slang riscv64 2.3.3-7.fc42 build 1.6 MiB DEBUG util.py:461: slang-devel riscv64 2.3.3-7.fc42 build 912.5 KiB DEBUG util.py:461: source-highlight riscv64 3.1.9-24.fc42 build 3.3 MiB DEBUG util.py:461: svt-av1-libs riscv64 2.3.0-1.fc42 build 2.3 MiB DEBUG util.py:461: sysprof-capture-devel riscv64 48.0-1.fc42 build 1.0 MiB DEBUG util.py:461: systemd riscv64 257.6-1.fc42 build 11.7 MiB DEBUG util.py:461: systemd-pam riscv64 257.6-1.fc42 build 1.3 MiB DEBUG util.py:461: systemd-rpm-macros noarch 257.6-1.fc42 build 10.7 KiB DEBUG util.py:461: systemd-shared riscv64 257.6-1.fc42 build 4.3 MiB DEBUG util.py:461: systemtap-sdt-devel riscv64 5.3-1.fc42 build 182.9 KiB DEBUG util.py:461: systemtap-sdt-dtrace riscv64 5.3-1.fc42 build 179.6 KiB DEBUG util.py:461: tpm2-tss riscv64 4.1.3-6.fc42 build 1.8 MiB DEBUG util.py:461: tpm2-tss-fapi riscv64 4.1.3-6.fc42 build 909.4 KiB DEBUG util.py:461: ttmkfdir riscv64 3.0.9-72.fc42 build 118.6 KiB DEBUG util.py:461: tzdata noarch 2025b-1.fc42 build 1.6 MiB DEBUG util.py:461: tzdata-java noarch 2025b-1.fc42 build 100.1 KiB DEBUG util.py:461: urw-base35-bookman-fonts noarch 20200910-24.fc42 build 1.4 MiB DEBUG util.py:461: urw-base35-c059-fonts noarch 20200910-24.fc42 build 1.4 MiB DEBUG util.py:461: urw-base35-d050000l-fonts noarch 20200910-24.fc42 build 84.3 KiB DEBUG util.py:461: urw-base35-fonts noarch 20200910-24.fc42 build 5.3 KiB DEBUG util.py:461: urw-base35-fonts-common noarch 20200910-24.fc42 build 37.4 KiB DEBUG util.py:461: urw-base35-gothic-fonts noarch 20200910-24.fc42 build 1.2 MiB DEBUG util.py:461: urw-base35-nimbus-mono-ps-fonts noarch 20200910-24.fc42 build 1.0 MiB DEBUG util.py:461: urw-base35-nimbus-roman-fonts noarch 20200910-24.fc42 build 1.4 MiB DEBUG util.py:461: urw-base35-nimbus-sans-fonts noarch 20200910-24.fc42 build 2.4 MiB DEBUG util.py:461: urw-base35-p052-fonts noarch 20200910-24.fc42 build 1.5 MiB DEBUG util.py:461: urw-base35-standard-symbols-ps-fonts noarch 20200910-24.fc42 build 64.9 KiB DEBUG util.py:461: urw-base35-z003-fonts noarch 20200910-24.fc42 build 390.8 KiB DEBUG util.py:461: xml-common noarch 0.6.3-66.fc42 build 78.4 KiB DEBUG util.py:461: xorg-x11-fonts-Type1 noarch 7.5-40.fc42 build 863.3 KiB DEBUG util.py:461: Transaction Summary: DEBUG util.py:461: Installing: 385 packages DEBUG util.py:459: Total size of inbound packages is 557 MiB. Need to download 557 MiB. DEBUG util.py:459: After this operation, 3 GiB extra will be used (install 3 GiB, remove 0 B). DEBUG util.py:459: [ 1/385] audit-libs-devel-0:4.0.3-2.fc 100% | 372.5 KiB/s | 90.1 KiB | 00m00s DEBUG util.py:459: [ 2/385] bc-0:1.08.1-2.fc42.riscv64 100% | 495.2 KiB/s | 127.3 KiB | 00m00s DEBUG util.py:459: [ 3/385] asciidoc-0:10.2.0-12.fc42.noa 100% | 1.3 MiB/s | 394.9 KiB | 00m00s DEBUG util.py:459: [ 4/385] bindgen-cli-0:0.71.1-1.fc42.r 100% | 9.0 MiB/s | 1.9 MiB | 00m00s DEBUG util.py:459: [ 5/385] bison-0:3.8.2-9.fc41.riscv64 100% | 3.0 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [ 6/385] binutils-devel-0:2.44-3.fc42. 100% | 12.9 MiB/s | 11.3 MiB | 00m01s DEBUG util.py:459: [ 7/385] bpftool-0:7.5.0-3.fc42.riscv6 100% | 496.4 KiB/s | 345.5 KiB | 00m01s DEBUG util.py:459: [ 8/385] clang-0:20.1.5-1.0.riscv64.fc 100% | 299.2 KiB/s | 157.7 KiB | 00m01s DEBUG util.py:459: [ 9/385] clippy-0:1.87.0-2.fc42.riscv6 100% | 13.4 MiB/s | 3.7 MiB | 00m00s DEBUG util.py:459: [ 10/385] dracut-0:105-3.fc42.riscv64 100% | 2.1 MiB/s | 639.9 KiB | 00m00s DEBUG util.py:459: [ 11/385] dwarves-0:1.30-1.fc42.riscv64 100% | 491.2 KiB/s | 146.4 KiB | 00m00s DEBUG util.py:459: [ 12/385] elfutils-devel-0:0.193-2.fc42 100% | 829.6 KiB/s | 53.1 KiB | 00m00s DEBUG util.py:459: [ 13/385] fuse-devel-0:2.9.9-23.fc42.ri 100% | 635.4 KiB/s | 33.7 KiB | 00m00s DEBUG util.py:459: [ 14/385] flex-0:2.6.4-19.fc42.riscv64 100% | 3.2 MiB/s | 307.4 KiB | 00m00s DEBUG util.py:459: [ 15/385] gettext-0:0.23.1-2.fc42.riscv 100% | 2.1 MiB/s | 1.1 MiB | 00m01s DEBUG util.py:459: [ 16/385] git-core-0:2.49.0-1.fc42.risc 100% | 5.2 MiB/s | 6.4 MiB | 00m01s DEBUG util.py:459: [ 17/385] gcc-c++-0:15.1.1-2.fc42.riscv 100% | 7.8 MiB/s | 17.2 MiB | 00m02s DEBUG util.py:459: [ 18/385] libkcapi-hmaccalc-0:1.5.0-5.f 100% | 30.2 KiB/s | 9.0 KiB | 00m00s DEBUG util.py:459: [ 19/385] glibc-static-0:2.41-5.0.riscv 100% | 3.7 MiB/s | 3.4 MiB | 00m01s DEBUG util.py:459: [ 20/385] hostname-0:3.25-2.fc42.riscv6 100% | 76.4 KiB/s | 27.8 KiB | 00m00s DEBUG util.py:459: [ 21/385] gcc-0:15.1.1-2.fc42.riscv64 100% | 10.9 MiB/s | 42.0 MiB | 00m04s DEBUG util.py:459: [ 22/385] kernel-rpm-macros-0:205-25.fc 100% | 24.3 KiB/s | 23.4 KiB | 00m01s DEBUG util.py:459: [ 23/385] java-21-openjdk-devel-1:21.0. 100% | 3.5 MiB/s | 5.0 MiB | 00m01s DEBUG util.py:459: [ 24/385] libbabeltrace-devel-0:1.5.11- 100% | 97.0 KiB/s | 27.9 KiB | 00m00s DEBUG util.py:459: [ 25/385] kmod-0:33-3.fc42.riscv64 100% | 407.0 KiB/s | 128.6 KiB | 00m00s DEBUG util.py:459: [ 26/385] libcap-devel-0:2.73-2.fc42.ri 100% | 1.0 MiB/s | 49.2 KiB | 00m00s DEBUG util.py:459: [ 27/385] libcap-ng-devel-0:0.8.5-4.fc4 100% | 587.5 KiB/s | 28.2 KiB | 00m00s DEBUG util.py:459: [ 28/385] libbpf-devel-2:1.5.0-2.fc42.r 100% | 917.4 KiB/s | 89.9 KiB | 00m00s DEBUG util.py:459: [ 29/385] libmnl-devel-0:1.0.5-7.fc42.r 100% | 491.5 KiB/s | 32.9 KiB | 00m00s DEBUG util.py:459: [ 30/385] libtraceevent-devel-0:1.8.4-3 100% | 250.1 KiB/s | 16.0 KiB | 00m00s DEBUG util.py:459: [ 31/385] libtracefs-devel-0:1.8.1-2.fc 100% | 303.4 KiB/s | 13.3 KiB | 00m00s DEBUG util.py:459: [ 32/385] lld-0:20.1.5-1.0.riscv64.fc42 100% | 740.0 KiB/s | 40.0 KiB | 00m00s DEBUG util.py:459: [ 33/385] lvm2-0:2.03.30-3.fc42.riscv64 100% | 6.4 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [ 34/385] m4-0:1.4.19-12.fc42.riscv64 100% | 1.1 MiB/s | 319.8 KiB | 00m00s DEBUG util.py:459: [ 35/385] llvm-devel-0:20.1.5-1.0.riscv 100% | 10.3 MiB/s | 4.5 MiB | 00m00s DEBUG util.py:459: [ 36/385] make-1:4.4.1-10.fc42.riscv64 100% | 2.4 MiB/s | 583.3 KiB | 00m00s DEBUG util.py:459: [ 37/385] ncurses-devel-0:6.5-5.2025012 100% | 3.1 MiB/s | 556.6 KiB | 00m00s DEBUG util.py:459: [ 38/385] newt-devel-0:0.52.25-1.fc42.r 100% | 686.9 KiB/s | 33.0 KiB | 00m00s DEBUG util.py:459: [ 39/385] net-tools-0:2.0-0.73.20160912 100% | 3.1 MiB/s | 314.8 KiB | 00m00s DEBUG util.py:459: [ 40/385] numactl-devel-0:2.0.19-2.fc42 100% | 538.8 KiB/s | 22.6 KiB | 00m00s DEBUG util.py:459: [ 41/385] pciutils-devel-0:3.13.0-7.fc4 100% | 891.7 KiB/s | 37.5 KiB | 00m00s DEBUG util.py:459: [ 42/385] openssl-1:3.2.4-3.fc42.riscv6 100% | 5.1 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [ 43/385] openssl-devel-1:3.2.4-3.fc42. 100% | 9.7 MiB/s | 2.7 MiB | 00m00s DEBUG util.py:459: [ 44/385] perl-ExtUtils-Embed-0:1.35-51 100% | 78.9 KiB/s | 17.8 KiB | 00m00s DEBUG util.py:459: [ 45/385] perl-Carp-0:1.54-512.fc42.noa 100% | 222.0 KiB/s | 28.9 KiB | 00m00s DEBUG util.py:459: [ 46/385] perl-generators-0:1.16-7.fc42 100% | 313.3 KiB/s | 16.3 KiB | 00m00s DEBUG util.py:459: [ 47/385] perl-devel-4:5.40.2-517.fc42. 100% | 6.1 MiB/s | 749.1 KiB | 00m00s DEBUG util.py:459: [ 48/385] python3-0:3.13.3-2.fc42.riscv 100% | 409.8 KiB/s | 29.5 KiB | 00m00s DEBUG util.py:459: [ 49/385] perl-interpreter-4:5.40.2-517 100% | 728.1 KiB/s | 72.1 KiB | 00m00s DEBUG util.py:459: [ 50/385] python3-devel-0:3.13.3-2.fc42 100% | 3.3 MiB/s | 359.3 KiB | 00m00s DEBUG util.py:459: [ 51/385] python3-docutils-0:0.21.2-2.f 100% | 6.9 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [ 52/385] python3-jsonschema-0:4.23.0-2 100% | 1.4 MiB/s | 198.3 KiB | 00m00s DEBUG util.py:459: [ 53/385] python3-pip-0:24.3.1-2.fc42.n 100% | 11.1 MiB/s | 2.5 MiB | 00m00s DEBUG util.py:459: [ 54/385] python3-setuptools-0:74.1.3-5 100% | 6.8 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [ 55/385] python3-pyyaml-0:6.0.2-2.fc42 100% | 750.8 KiB/s | 220.0 KiB | 00m00s DEBUG util.py:459: [ 56/385] rsync-0:3.4.1-3.fc42.riscv64 100% | 2.6 MiB/s | 437.8 KiB | 00m00s DEBUG util.py:459: [ 57/385] rust-src-0:1.87.0-2.fc42.noar 100% | 7.1 MiB/s | 3.2 MiB | 00m00s DEBUG util.py:459: [ 58/385] rustfmt-0:1.87.0-2.fc42.riscv 100% | 2.9 MiB/s | 2.2 MiB | 00m01s DEBUG util.py:459: [ 59/385] systemd-boot-unsigned-0:257.6 100% | 214.1 KiB/s | 117.1 KiB | 00m01s DEBUG util.py:459: [ 60/385] systemd-udev-0:257.6-1.fc42.r 100% | 4.0 MiB/s | 2.3 MiB | 00m01s DEBUG util.py:459: [ 61/385] systemd-ukify-0:257.6-1.fc42. 100% | 151.3 KiB/s | 61.3 KiB | 00m00s DEBUG util.py:459: [ 62/385] rust-0:1.87.0-2.fc42.riscv64 100% | 14.1 MiB/s | 29.0 MiB | 00m02s DEBUG util.py:459: [ 63/385] xmlto-0:0.0.29-2.fc42.riscv64 100% | 77.3 KiB/s | 50.2 KiB | 00m01s DEBUG util.py:459: [ 64/385] tpm2-tools-0:5.7-3.fc42.riscv 100% | 1.0 MiB/s | 798.3 KiB | 00m01s DEBUG util.py:459: [ 65/385] xz-devel-1:5.8.1-2.fc42.riscv 100% | 613.7 KiB/s | 62.6 KiB | 00m00s DEBUG util.py:459: [ 66/385] zlib-ng-compat-devel-0:2.2.4- 100% | 386.9 KiB/s | 38.3 KiB | 00m00s DEBUG util.py:459: [ 67/385] docbook-style-xsl-0:1.79.2-24 100% | 6.4 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [ 68/385] libxslt-0:1.1.43-1.fc42.riscv 100% | 740.7 KiB/s | 191.8 KiB | 00m00s DEBUG util.py:459: [ 69/385] graphviz-0:12.2.1-8.fc42.risc 100% | 11.0 MiB/s | 4.6 MiB | 00m00s DEBUG util.py:459: [ 70/385] source-highlight-0:3.1.9-24.f 100% | 2.8 MiB/s | 792.5 KiB | 00m00s DEBUG util.py:459: [ 71/385] kernel-headers-0:6.14.3-300.f 100% | 5.3 MiB/s | 1.5 MiB | 00m00s DEBUG util.py:459: [ 72/385] libstdc++-devel-0:15.1.1-2.fc 100% | 4.9 MiB/s | 4.0 MiB | 00m01s DEBUG util.py:459: [ 73/385] cargo-0:1.87.0-2.fc42.riscv64 100% | 5.5 MiB/s | 7.1 MiB | 00m01s DEBUG util.py:459: [ 74/385] clang-libs-0:20.1.5-1.0.riscv 100% | 9.6 MiB/s | 27.1 MiB | 00m03s DEBUG util.py:459: [ 75/385] llvm-libs-0:20.1.5-1.0.riscv6 100% | 8.4 MiB/s | 31.4 MiB | 00m04s DEBUG util.py:459: [ 76/385] kmod-libs-0:33-3.fc42.riscv64 100% | 46.3 KiB/s | 73.1 KiB | 00m02s DEBUG util.py:459: [ 77/385] procps-ng-0:4.0.4-6.fc42.risc 100% | 380.6 KiB/s | 377.6 KiB | 00m01s DEBUG util.py:459: [ 78/385] elfutils-libelf-devel-0:0.193 100% | 979.7 KiB/s | 41.1 KiB | 00m00s DEBUG util.py:459: [ 79/385] libdwarves1-0:1.30-1.fc42.ris 100% | 2.7 MiB/s | 281.4 KiB | 00m00s DEBUG util.py:459: [ 80/385] systemd-0:257.6-1.fc42.riscv6 100% | 12.2 MiB/s | 4.0 MiB | 00m00s DEBUG util.py:459: [ 81/385] libzstd-devel-0:1.5.7-1.fc42. 100% | 194.8 KiB/s | 53.0 KiB | 00m00s DEBUG util.py:459: [ 82/385] fuse-libs-0:2.9.9-23.fc42.ris 100% | 424.7 KiB/s | 101.5 KiB | 00m00s DEBUG util.py:459: [ 83/385] glibc-devel-0:2.41-5.0.riscv6 100% | 2.0 MiB/s | 445.8 KiB | 00m00s DEBUG util.py:459: [ 84/385] libasan-0:15.1.1-2.fc42.riscv 100% | 2.1 MiB/s | 529.5 KiB | 00m00s DEBUG util.py:459: [ 85/385] libatomic-0:15.1.1-2.fc42.ris 100% | 168.9 KiB/s | 37.2 KiB | 00m00s DEBUG util.py:459: [ 86/385] cpp-0:15.1.1-2.fc42.riscv64 100% | 15.9 MiB/s | 14.9 MiB | 00m01s DEBUG util.py:459: [ 87/385] libmpc-0:1.3.1-7.fc42.riscv64 100% | 113.4 KiB/s | 77.0 KiB | 00m01s DEBUG util.py:459: [ 88/385] libubsan-0:15.1.1-2.fc42.risc 100% | 450.2 KiB/s | 228.7 KiB | 00m01s DEBUG util.py:459: [ 89/385] gettext-libs-0:0.23.1-2.fc42. 100% | 6.3 MiB/s | 751.8 KiB | 00m00s DEBUG util.py:459: [ 90/385] gettext-runtime-0:0.23.1-2.fc 100% | 923.7 KiB/s | 111.8 KiB | 00m00s DEBUG util.py:459: [ 91/385] libtextstyle-0:0.23.1-2.fc42. 100% | 1.1 MiB/s | 133.8 KiB | 00m00s DEBUG util.py:459: [ 92/385] expat-0:2.7.1-1.fc42.riscv64 100% | 1.3 MiB/s | 118.6 KiB | 00m00s DEBUG util.py:459: [ 93/385] less-0:679-1.fc42.riscv64 100% | 1.9 MiB/s | 205.4 KiB | 00m00s DEBUG util.py:459: [ 94/385] openssh-clients-0:9.9p1-11.fc 100% | 6.0 MiB/s | 875.5 KiB | 00m00s DEBUG util.py:459: [ 95/385] libkcapi-hasher-0:1.5.0-5.fc4 100% | 441.0 KiB/s | 26.9 KiB | 00m00s DEBUG util.py:459: [ 96/385] libxcrypt-static-0:4.4.38-7.f 100% | 2.5 MiB/s | 274.5 KiB | 00m00s DEBUG util.py:459: [ 97/385] java-21-openjdk-1:21.0.6.0.7- 100% | 4.3 MiB/s | 432.5 KiB | 00m00s DEBUG util.py:459: [ 98/385] glib2-devel-0:2.84.2-1.fc42.r 100% | 8.8 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [ 99/385] libbabeltrace-0:1.5.11-10.fc4 100% | 1.5 MiB/s | 213.4 KiB | 00m00s DEBUG util.py:459: [100/385] libuuid-devel-0:2.40.4-7.fc42 100% | 319.1 KiB/s | 30.6 KiB | 00m00s DEBUG util.py:459: [101/385] popt-devel-0:1.19-8.fc42.risc 100% | 472.3 KiB/s | 25.0 KiB | 00m00s DEBUG util.py:459: [102/385] libmnl-0:1.0.5-7.fc42.riscv64 100% | 651.3 KiB/s | 28.0 KiB | 00m00s DEBUG util.py:459: [103/385] libbpf-2:1.5.0-2.fc42.riscv64 100% | 2.1 MiB/s | 194.7 KiB | 00m00s DEBUG util.py:459: [104/385] libtraceevent-0:1.8.4-3.fc42. 100% | 2.4 MiB/s | 252.7 KiB | 00m00s DEBUG util.py:459: [105/385] libtracefs-0:1.8.1-2.fc42.ris 100% | 2.7 MiB/s | 330.0 KiB | 00m00s DEBUG util.py:459: [106/385] lld-libs-0:20.1.5-1.0.riscv64 100% | 9.9 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [107/385] cmake-filesystem-0:3.31.6-2.1 100% | 132.0 KiB/s | 17.4 KiB | 00m00s DEBUG util.py:459: [108/385] libedit-devel-0:3.1-55.202501 100% | 240.7 KiB/s | 40.7 KiB | 00m00s DEBUG util.py:459: [109/385] llvm-googletest-0:20.1.5-1.0. 100% | 2.1 MiB/s | 666.7 KiB | 00m00s DEBUG util.py:459: [110/385] llvm-test-0:20.1.5-1.0.riscv6 100% | 984.3 KiB/s | 688.1 KiB | 00m01s DEBUG util.py:459: [111/385] device-mapper-event-libs-0:1. 100% | 81.0 KiB/s | 30.8 KiB | 00m00s DEBUG util.py:459: [112/385] llvm-0:20.1.5-1.0.riscv64.fc4 100% | 12.0 MiB/s | 22.5 MiB | 00m02s DEBUG util.py:459: [113/385] libaio-0:0.3.111-21.fc42.risc 100% | 79.5 KiB/s | 23.4 KiB | 00m00s DEBUG util.py:459: [114/385] device-mapper-persistent-data 100% | 1.1 MiB/s | 1.1 MiB | 00m01s DEBUG util.py:459: [115/385] libedit-0:3.1-55.20250104cvs. 100% | 193.5 KiB/s | 108.0 KiB | 00m01s DEBUG util.py:459: [116/385] lvm2-libs-0:2.03.30-3.fc42.ri 100% | 1.8 MiB/s | 1.0 MiB | 00m01s DEBUG util.py:459: [117/385] ncurses-c++-libs-0:6.5-5.2025 100% | 107.1 KiB/s | 38.1 KiB | 00m00s DEBUG util.py:459: [118/385] newt-0:0.52.25-1.fc42.riscv64 100% | 204.1 KiB/s | 101.4 KiB | 00m00s DEBUG util.py:459: [119/385] slang-devel-0:2.3.3-7.fc42.ri 100% | 531.9 KiB/s | 193.6 KiB | 00m00s DEBUG util.py:459: [120/385] numactl-libs-0:2.0.19-2.fc42. 100% | 142.6 KiB/s | 32.9 KiB | 00m00s DEBUG util.py:459: [121/385] pciutils-libs-0:3.13.0-7.fc42 100% | 192.2 KiB/s | 52.1 KiB | 00m00s DEBUG util.py:459: [122/385] pciutils-0:3.13.0-7.fc42.risc 100% | 203.6 KiB/s | 102.0 KiB | 00m01s DEBUG util.py:459: [123/385] perl-Exporter-0:5.78-512.fc42 100% | 136.5 KiB/s | 31.0 KiB | 00m00s DEBUG util.py:459: [124/385] llvm-static-0:20.1.5-1.0.risc 100% | 14.2 MiB/s | 88.9 MiB | 00m06s DEBUG util.py:459: [125/385] perl-PathTools-0:3.91-513.fc4 100% | 34.8 KiB/s | 82.9 KiB | 00m02s DEBUG util.py:459: [126/385] perl-libs-4:5.40.2-517.fc42.r 100% | 1.0 MiB/s | 2.3 MiB | 00m02s DEBUG util.py:459: [127/385] libxcrypt-devel-0:4.4.38-7.fc 100% | 219.8 KiB/s | 29.2 KiB | 00m00s DEBUG util.py:459: [128/385] perl-Devel-PPPort-0:3.72-513. 100% | 1.4 MiB/s | 221.7 KiB | 00m00s DEBUG util.py:459: [129/385] perl-ExtUtils-Constant-0:0.25 100% | 1.0 MiB/s | 43.9 KiB | 00m00s DEBUG util.py:459: [130/385] perl-ExtUtils-Install-0:2.22- 100% | 965.6 KiB/s | 43.5 KiB | 00m00s DEBUG util.py:459: [131/385] perl-File-Compare-0:1.100.800 100% | 297.8 KiB/s | 13.4 KiB | 00m00s DEBUG util.py:459: [132/385] perl-File-Path-0:2.18-512.fc4 100% | 732.8 KiB/s | 35.2 KiB | 00m00s DEBUG util.py:459: [133/385] perl-ExtUtils-ParseXS-1:3.51- 100% | 1.7 MiB/s | 182.0 KiB | 00m00s DEBUG util.py:459: [134/385] perl-Getopt-Long-1:2.58-3.fc4 100% | 1.1 MiB/s | 63.7 KiB | 00m00s DEBUG util.py:459: [135/385] perl-Text-Tabs+Wrap-0:2024.00 100% | 444.9 KiB/s | 21.8 KiB | 00m00s DEBUG util.py:459: [136/385] perl-vars-0:1.05-517.fc42.noa 100% | 346.3 KiB/s | 13.2 KiB | 00m00s DEBUG util.py:459: [137/385] perl-Fedora-VSP-0:0.001-36.fc 100% | 508.3 KiB/s | 22.9 KiB | 00m00s DEBUG util.py:459: [138/385] systemtap-sdt-devel-0:5.3-1.f 100% | 805.3 KiB/s | 68.4 KiB | 00m00s DEBUG util.py:459: [139/385] systemtap-sdt-dtrace-0:5.3-1. 100% | 804.8 KiB/s | 69.2 KiB | 00m00s DEBUG util.py:459: [140/385] perl-File-Basename-0:2.86-517 100% | 393.8 KiB/s | 17.3 KiB | 00m00s DEBUG util.py:459: [141/385] perl-macros-4:5.40.2-517.fc42 100% | 277.4 KiB/s | 12.5 KiB | 00m00s DEBUG util.py:459: [142/385] python3-jsonschema-specificat 100% | 115.2 KiB/s | 21.7 KiB | 00m00s DEBUG util.py:459: [143/385] python3-attrs-0:25.1.0-1.fc42 100% | 347.5 KiB/s | 118.5 KiB | 00m00s DEBUG util.py:459: [144/385] python3-libs-0:3.13.3-2.fc42. 100% | 15.2 MiB/s | 8.9 MiB | 00m01s DEBUG util.py:459: [145/385] python3-referencing-0:0.36.2- 100% | 217.7 KiB/s | 77.7 KiB | 00m00s DEBUG util.py:459: [146/385] python3-rpds-py-0:0.25.0-1.fc 100% | 1.2 MiB/s | 322.9 KiB | 00m00s DEBUG util.py:459: [147/385] libyaml-0:0.2.5-16.fc42.riscv 100% | 831.2 KiB/s | 64.8 KiB | 00m00s DEBUG util.py:459: [148/385] cryptsetup-libs-0:2.7.5-2.fc4 100% | 1.4 MiB/s | 541.1 KiB | 00m00s DEBUG util.py:459: [149/385] kbd-0:2.7.1-3.fc42.riscv64 100% | 739.9 KiB/s | 387.7 KiB | 00m01s DEBUG util.py:459: [150/385] systemd-shared-0:257.6-1.fc42 100% | 3.0 MiB/s | 1.8 MiB | 00m01s DEBUG util.py:459: [151/385] python3-cryptography-0:44.0.0 100% | 2.7 MiB/s | 1.4 MiB | 00m01s DEBUG util.py:459: [152/385] python3-pefile-0:2024.8.26-2. 100% | 418.5 KiB/s | 170.3 KiB | 00m00s DEBUG util.py:459: [153/385] rust-std-static-0:1.87.0-2.fc 100% | 15.8 MiB/s | 37.2 MiB | 00m02s DEBUG util.py:459: [154/385] python3-zstandard-0:0.23.0-2. 100% | 455.2 KiB/s | 573.1 KiB | 00m01s DEBUG util.py:459: [155/385] tpm2-tss-0:4.1.3-6.fc42.riscv 100% | 544.8 KiB/s | 546.9 KiB | 00m01s DEBUG util.py:459: [156/385] tpm2-tss-fapi-0:4.1.3-6.fc42. 100% | 2.8 MiB/s | 365.9 KiB | 00m00s DEBUG util.py:459: [157/385] xml-common-0:0.6.3-66.fc42.no 100% | 821.1 KiB/s | 31.2 KiB | 00m00s DEBUG util.py:459: [158/385] docbook-dtds-0:1.0-88.fc42.no 100% | 2.0 MiB/s | 282.8 KiB | 00m00s DEBUG util.py:459: [159/385] cairo-0:1.18.2-3.fc42.riscv64 100% | 6.6 MiB/s | 781.3 KiB | 00m00s DEBUG util.py:459: [160/385] fontconfig-0:2.16.0-2.fc42.ri 100% | 2.3 MiB/s | 267.3 KiB | 00m00s DEBUG util.py:459: [161/385] freetype-0:2.13.3-2.fc42.risc 100% | 3.7 MiB/s | 441.7 KiB | 00m00s DEBUG util.py:459: [162/385] gd-0:2.3.3-18.fc42.riscv64 100% | 1.6 MiB/s | 144.9 KiB | 00m00s DEBUG util.py:459: [163/385] gdk-pixbuf2-0:2.42.12-10.fc42 100% | 4.3 MiB/s | 472.7 KiB | 00m00s DEBUG util.py:459: [164/385] glib2-0:2.84.2-1.fc42.riscv64 100% | 12.3 MiB/s | 3.2 MiB | 00m00s DEBUG util.py:459: [165/385] graphviz-libs-0:12.2.1-8.fc42 100% | 1.9 MiB/s | 484.6 KiB | 00m00s DEBUG util.py:459: [166/385] gts-0:0.7.6-50.20121130.fc42. 100% | 1.1 MiB/s | 246.6 KiB | 00m00s DEBUG util.py:459: [167/385] lasi-0:1.1.3-16.fc42.riscv64 100% | 1.3 MiB/s | 54.4 KiB | 00m00s DEBUG util.py:459: [168/385] harfbuzz-0:10.4.0-1.fc42.risc 100% | 8.6 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [169/385] libXrender-0:0.9.12-2.fc42.ri 100% | 327.5 KiB/s | 27.8 KiB | 00m00s DEBUG util.py:459: [170/385] libX11-0:1.8.11-1.fc42.riscv6 100% | 4.4 MiB/s | 670.9 KiB | 00m00s DEBUG util.py:459: [171/385] libgs-0:10.05.1-1.fc42.riscv6 100% | 12.9 MiB/s | 3.6 MiB | 00m00s DEBUG util.py:459: [172/385] libwebp-0:1.5.0-2.fc42.riscv6 100% | 960.4 KiB/s | 262.2 KiB | 00m00s DEBUG util.py:459: [173/385] librsvg2-0:2.60.0-1.fc42.risc 100% | 4.7 MiB/s | 1.9 MiB | 00m00s DEBUG util.py:459: [174/385] pango-0:1.56.3-1.fc42.riscv64 100% | 2.6 MiB/s | 364.7 KiB | 00m00s DEBUG util.py:459: [175/385] poppler-glib-0:25.02.0-1.fc42 100% | 1.6 MiB/s | 212.7 KiB | 00m00s DEBUG util.py:459: [176/385] urw-base35-fonts-0:20200910-2 100% | 183.2 KiB/s | 10.1 KiB | 00m00s DEBUG util.py:459: [177/385] boost-regex-0:1.83.0-12.fc42. 100% | 1.6 MiB/s | 120.8 KiB | 00m00s DEBUG util.py:459: [178/385] clang-resource-filesystem-0:2 100% | 417.4 KiB/s | 20.0 KiB | 00m00s DEBUG util.py:459: [179/385] ctags-0:6.1.0-2.fc42.riscv64 100% | 7.3 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [180/385] llvm-filesystem-0:20.1.5-1.0. 100% | 143.3 KiB/s | 14.2 KiB | 00m00s DEBUG util.py:459: [181/385] libgit2-0:1.9.0-4.fc42.riscv6 100% | 4.5 MiB/s | 598.7 KiB | 00m00s DEBUG util.py:459: [182/385] dbus-1:1.16.0-3.fc42.riscv64 100% | 146.7 KiB/s | 7.6 KiB | 00m00s DEBUG util.py:459: [183/385] libssh2-0:1.11.1-3.fc42.riscv 100% | 1.3 MiB/s | 150.2 KiB | 00m00s DEBUG util.py:459: [184/385] libseccomp-0:2.5.5-2.fc42.ris 100% | 740.3 KiB/s | 73.3 KiB | 00m00s DEBUG util.py:459: [185/385] systemd-pam-0:257.6-1.fc42.ri 100% | 4.2 MiB/s | 488.7 KiB | 00m00s DEBUG util.py:459: [186/385] gettext-envsubst-0:0.23.1-2.f 100% | 693.4 KiB/s | 44.4 KiB | 00m00s DEBUG util.py:459: [187/385] libfido2-0:1.15.0-3.fc42.risc 100% | 1.2 MiB/s | 105.4 KiB | 00m00s DEBUG util.py:459: [188/385] libkcapi-0:1.5.0-5.fc42.riscv 100% | 956.5 KiB/s | 46.9 KiB | 00m00s DEBUG util.py:459: [189/385] openssh-0:9.9p1-11.fc42.riscv 100% | 4.9 MiB/s | 394.2 KiB | 00m00s DEBUG util.py:459: [190/385] libXcomposite-0:0.4.6-5.fc42. 100% | 486.2 KiB/s | 24.3 KiB | 00m00s DEBUG util.py:459: [191/385] libXext-0:1.3.6-3.fc42.riscv6 100% | 1.0 MiB/s | 40.7 KiB | 00m00s DEBUG util.py:459: [192/385] libXi-0:1.8.2-2.fc42.riscv64 100% | 193.2 KiB/s | 41.9 KiB | 00m00s DEBUG util.py:459: [193/385] libXtst-0:1.2.5-2.fc42.riscv6 100% | 103.4 KiB/s | 21.2 KiB | 00m00s DEBUG util.py:459: [194/385] libffi-devel-0:3.4.6-5.0.risc 100% | 96.7 KiB/s | 27.7 KiB | 00m00s DEBUG util.py:459: [195/385] xorg-x11-fonts-Type1-0:7.5-40 100% | 1.0 MiB/s | 501.8 KiB | 00m00s DEBUG util.py:459: [196/385] libmount-devel-0:2.40.4-7.fc4 100% | 124.0 KiB/s | 23.8 KiB | 00m00s DEBUG util.py:459: [197/385] pcre2-devel-0:10.45-1.fc42.ri 100% | 1.0 MiB/s | 510.6 KiB | 00m00s DEBUG util.py:459: [198/385] libselinux-devel-0:3.8-2.fc42 100% | 230.5 KiB/s | 115.9 KiB | 00m01s DEBUG util.py:459: [199/385] python3-packaging-0:24.2-3.fc 100% | 398.4 KiB/s | 143.8 KiB | 00m00s DEBUG util.py:459: [200/385] sysprof-capture-devel-0:48.0- 100% | 413.7 KiB/s | 149.3 KiB | 00m00s DEBUG util.py:459: [201/385] java-21-openjdk-headless-1:21 100% | 17.2 MiB/s | 47.4 MiB | 00m03s DEBUG util.py:459: [202/385] device-mapper-event-0:1.02.20 100% | 29.8 KiB/s | 33.5 KiB | 00m01s DEBUG util.py:459: [203/385] device-mapper-libs-0:1.02.204 100% | 159.8 KiB/s | 182.3 KiB | 00m01s DEBUG util.py:459: [204/385] perl-Errno-0:1.38-517.fc42.ri 100% | 406.6 KiB/s | 15.0 KiB | 00m00s DEBUG util.py:459: [205/385] slang-0:2.3.3-7.fc42.riscv64 100% | 2.8 MiB/s | 448.9 KiB | 00m00s DEBUG util.py:459: [206/385] hwdata-0:0.396-1.fc42.noarch 100% | 7.6 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [207/385] perl-Scalar-List-Utils-5:1.69 100% | 421.9 KiB/s | 75.9 KiB | 00m00s DEBUG util.py:459: [208/385] perl-constant-0:1.33-513.fc42 100% | 283.7 KiB/s | 23.0 KiB | 00m00s DEBUG util.py:459: [209/385] perl-DynaLoader-0:1.56-517.fc 100% | 544.8 KiB/s | 26.2 KiB | 00m00s DEBUG util.py:459: [210/385] perl-Data-Dumper-0:2.189-513. 100% | 1.1 MiB/s | 55.4 KiB | 00m00s DEBUG util.py:459: [211/385] perl-AutoSplit-0:5.74-517.fc4 100% | 518.5 KiB/s | 21.8 KiB | 00m00s DEBUG util.py:459: [212/385] perl-Encode-4:3.21-512.fc42.r 100% | 8.2 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [213/385] perl-File-Copy-0:2.41-517.fc4 100% | 250.2 KiB/s | 20.3 KiB | 00m00s DEBUG util.py:459: [214/385] perl-ExtUtils-MakeMaker-2:7.7 100% | 2.2 MiB/s | 284.2 KiB | 00m00s DEBUG util.py:459: [215/385] perl-Symbol-0:1.09-517.fc42.n 100% | 341.8 KiB/s | 14.4 KiB | 00m00s DEBUG util.py:459: [216/385] perl-File-Find-0:1.44-517.fc4 100% | 499.4 KiB/s | 25.5 KiB | 00m00s DEBUG util.py:459: [217/385] perl-Pod-Usage-4:2.05-1.fc42. 100% | 988.0 KiB/s | 40.5 KiB | 00m00s DEBUG util.py:459: [218/385] perl-Text-ParseWords-0:3.31-5 100% | 392.3 KiB/s | 16.5 KiB | 00m00s DEBUG util.py:459: [219/385] perl-base-0:2.27-517.fc42.noa 100% | 348.2 KiB/s | 16.4 KiB | 00m00s DEBUG util.py:459: [220/385] perl-overload-0:1.37-517.fc42 100% | 1.1 MiB/s | 45.7 KiB | 00m00s DEBUG util.py:459: [221/385] libb2-0:0.98.1-13.fc42.riscv6 100% | 610.9 KiB/s | 27.5 KiB | 00m00s DEBUG util.py:459: [222/385] python3-pyparsing-0:3.1.2-8.f 100% | 2.9 MiB/s | 271.0 KiB | 00m00s DEBUG util.py:459: [223/385] mpdecimal-0:4.0.1-1.fc42.risc 100% | 1.2 MiB/s | 105.0 KiB | 00m00s DEBUG util.py:459: [224/385] python-pip-wheel-0:24.3.1-2.f 100% | 7.9 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [225/385] tzdata-0:2025b-1.fc42.noarch 100% | 2.8 MiB/s | 429.3 KiB | 00m00s DEBUG util.py:459: [226/385] kbd-legacy-0:2.7.1-3.fc42.noa 100% | 3.3 MiB/s | 563.7 KiB | 00m00s DEBUG util.py:459: [227/385] kbd-misc-0:2.7.1-3.fc42.noarc 100% | 8.8 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [228/385] python3-cffi-0:1.17.1-2.fc42. 100% | 1.8 MiB/s | 308.2 KiB | 00m00s DEBUG util.py:459: [229/385] libusb1-0:1.0.28-2.fc42.riscv 100% | 557.9 KiB/s | 79.8 KiB | 00m00s DEBUG util.py:459: [230/385] sgml-common-0:0.6.3-66.fc42.n 100% | 1.2 MiB/s | 53.9 KiB | 00m00s DEBUG util.py:459: [231/385] libpng-2:1.6.44-2.fc42.riscv6 100% | 1.5 MiB/s | 123.6 KiB | 00m00s DEBUG util.py:459: [232/385] libxcb-0:1.17.0-5.fc42.riscv6 100% | 2.3 MiB/s | 246.8 KiB | 00m00s DEBUG util.py:459: [233/385] pixman-0:0.44.2-2.fc42.riscv6 100% | 2.1 MiB/s | 211.8 KiB | 00m00s DEBUG util.py:459: [234/385] default-fonts-core-sans-0:4.2 100% | 299.5 KiB/s | 25.2 KiB | 00m00s DEBUG util.py:459: [235/385] fonts-filesystem-1:2.0.5-22.f 100% | 147.9 KiB/s | 8.7 KiB | 00m00s DEBUG util.py:459: [236/385] libXpm-0:3.5.17-5.fc42.riscv6 100% | 835.3 KiB/s | 66.8 KiB | 00m00s DEBUG util.py:459: [237/385] libavif-0:1.1.1-1.fc42.riscv6 100% | 1.3 MiB/s | 107.6 KiB | 00m00s DEBUG util.py:459: [238/385] libimagequant-0:4.0.3-7.fc42. 100% | 3.1 MiB/s | 316.5 KiB | 00m00s DEBUG util.py:459: [239/385] libjpeg-turbo-0:3.1.0-2.fc42. 100% | 2.1 MiB/s | 222.7 KiB | 00m00s DEBUG util.py:459: [240/385] libtiff-0:4.7.0-3.fc42.riscv6 100% | 2.2 MiB/s | 222.0 KiB | 00m00s DEBUG util.py:459: [241/385] shared-mime-info-0:2.3-7.fc42 100% | 3.6 MiB/s | 392.0 KiB | 00m00s DEBUG util.py:459: [242/385] gnutls-0:3.8.8-3.fc42.riscv64 100% | 7.5 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [243/385] netpbm-0:11.10.00-1.fc42.risc 100% | 1.5 MiB/s | 191.9 KiB | 00m00s DEBUG util.py:459: [244/385] graphite2-0:1.3.14-18.fc42.ri 100% | 976.4 KiB/s | 107.4 KiB | 00m00s DEBUG util.py:459: [245/385] libX11-common-0:1.8.11-1.fc42 100% | 1.4 MiB/s | 145.0 KiB | 00m00s DEBUG util.py:459: [246/385] adobe-mappings-cmap-deprecate 100% | 1.1 MiB/s | 110.5 KiB | 00m00s DEBUG util.py:459: [247/385] adobe-mappings-cmap-0:2023111 100% | 10.5 MiB/s | 2.2 MiB | 00m00s DEBUG util.py:459: [248/385] adobe-mappings-pdf-0:20190401 100% | 3.5 MiB/s | 616.8 KiB | 00m00s DEBUG util.py:459: [249/385] cups-libs-1:2.4.12-3.fc42.ris 100% | 1.6 MiB/s | 279.8 KiB | 00m00s DEBUG util.py:459: [250/385] google-droid-sans-fonts-0:202 100% | 12.1 MiB/s | 2.7 MiB | 00m00s DEBUG util.py:459: [251/385] jbig2dec-libs-0:0.20-6.fc42.r 100% | 386.2 KiB/s | 74.9 KiB | 00m00s DEBUG util.py:459: [252/385] lcms2-0:2.16-5.fc42.riscv64 100% | 1.0 MiB/s | 196.1 KiB | 00m00s DEBUG util.py:459: [253/385] libijs-0:0.35-24.fc42.riscv64 100% | 720.3 KiB/s | 29.5 KiB | 00m00s DEBUG util.py:459: [254/385] libpaper-1:2.1.1-8.fc42.riscv 100% | 637.1 KiB/s | 26.8 KiB | 00m00s DEBUG util.py:459: [255/385] libXt-0:1.3.1-2.fc42.riscv64 100% | 2.2 MiB/s | 185.6 KiB | 00m00s DEBUG util.py:459: [256/385] cairo-gobject-0:1.18.2-3.fc42 100% | 462.4 KiB/s | 17.6 KiB | 00m00s DEBUG util.py:459: [257/385] openjpeg-0:2.5.3-6.fc42.riscv 100% | 2.1 MiB/s | 203.3 KiB | 00m00s DEBUG util.py:459: [258/385] libdav1d-0:1.5.1-1.fc42.riscv 100% | 3.6 MiB/s | 299.3 KiB | 00m00s DEBUG util.py:459: [259/385] rsvg-pixbuf-loader-0:2.60.0-1 100% | 1.9 MiB/s | 166.9 KiB | 00m00s DEBUG util.py:459: [260/385] fribidi-0:1.0.16-2.fc42.riscv 100% | 1.1 MiB/s | 54.6 KiB | 00m00s DEBUG util.py:459: [261/385] libXft-0:2.3.8-8.fc42.riscv64 100% | 956.2 KiB/s | 74.6 KiB | 00m00s DEBUG util.py:459: [262/385] libthai-0:0.1.29-10.fc42.risc 100% | 2.7 MiB/s | 211.7 KiB | 00m00s DEBUG util.py:459: [263/385] poppler-0:25.02.0-1.fc42.risc 100% | 8.3 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [264/385] urw-base35-bookman-fonts-0:20 100% | 5.1 MiB/s | 846.9 KiB | 00m00s DEBUG util.py:459: [265/385] urw-base35-c059-fonts-0:20200 100% | 4.5 MiB/s | 874.0 KiB | 00m00s DEBUG util.py:459: [266/385] urw-base35-fonts-common-0:202 100% | 385.8 KiB/s | 20.8 KiB | 00m00s DEBUG util.py:459: [267/385] urw-base35-d050000l-fonts-0:2 100% | 695.6 KiB/s | 75.8 KiB | 00m00s DEBUG util.py:459: [268/385] urw-base35-gothic-fonts-0:202 100% | 5.7 MiB/s | 642.5 KiB | 00m00s DEBUG util.py:459: [269/385] urw-base35-nimbus-mono-ps-fon 100% | 5.3 MiB/s | 794.7 KiB | 00m00s DEBUG util.py:459: [270/385] urw-base35-nimbus-roman-fonts 100% | 4.5 MiB/s | 856.1 KiB | 00m00s DEBUG util.py:459: [271/385] urw-base35-nimbus-sans-fonts- 100% | 7.5 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [272/385] urw-base35-standard-symbols-p 100% | 613.7 KiB/s | 58.3 KiB | 00m00s DEBUG util.py:459: [273/385] urw-base35-p052-fonts-0:20200 100% | 5.0 MiB/s | 973.2 KiB | 00m00s DEBUG util.py:459: [274/385] urw-base35-z003-fonts-0:20200 100% | 3.2 MiB/s | 275.5 KiB | 00m00s DEBUG util.py:459: [275/385] llhttp-0:9.2.1-5.fc42.riscv64 100% | 238.7 KiB/s | 32.9 KiB | 00m00s DEBUG util.py:459: [276/385] libcbor-0:0.11.0-3.fc42.riscv 100% | 144.2 KiB/s | 32.7 KiB | 00m00s DEBUG util.py:459: [277/385] dbus-broker-0:36-5.fc42.riscv 100% | 522.7 KiB/s | 184.5 KiB | 00m00s DEBUG util.py:459: [278/385] libicu-0:76.1-4.fc42.riscv64 100% | 15.4 MiB/s | 10.7 MiB | 00m01s DEBUG util.py:459: [279/385] javapackages-filesystem-0:6.4 100% | 51.8 KiB/s | 14.1 KiB | 00m00s DEBUG util.py:459: [280/385] alsa-lib-0:1.2.14-2.fc42.risc 100% | 1.5 MiB/s | 546.6 KiB | 00m00s DEBUG util.py:459: [281/385] nss-0:3.111.0-2.fc42.riscv64 100% | 6.0 MiB/s | 768.7 KiB | 00m00s DEBUG util.py:459: [282/385] lksctp-tools-0:1.0.20-2.fc42. 100% | 738.9 KiB/s | 102.7 KiB | 00m00s DEBUG util.py:459: [283/385] tzdata-java-0:2025b-1.fc42.no 100% | 703.5 KiB/s | 46.4 KiB | 00m00s DEBUG util.py:459: [284/385] mkfontscale-0:1.2.3-2.fc42.ri 100% | 645.0 KiB/s | 32.9 KiB | 00m00s DEBUG util.py:459: [285/385] libblkid-devel-0:2.40.4-7.fc4 100% | 520.1 KiB/s | 22.9 KiB | 00m00s DEBUG util.py:459: [286/385] ttmkfdir-0:3.0.9-72.fc42.risc 100% | 1.0 MiB/s | 57.0 KiB | 00m00s DEBUG util.py:459: [287/385] libsepol-devel-0:3.8-1.fc42.r 100% | 936.9 KiB/s | 40.3 KiB | 00m00s DEBUG util.py:459: [288/385] pcre2-utf16-0:10.45-1.fc42.ri 100% | 2.4 MiB/s | 245.5 KiB | 00m00s DEBUG util.py:459: [289/385] pcre2-utf32-0:10.45-1.fc42.ri 100% | 2.1 MiB/s | 232.5 KiB | 00m00s DEBUG util.py:459: [290/385] device-mapper-0:1.02.204-3.fc 100% | 1.5 MiB/s | 138.6 KiB | 00m00s DEBUG util.py:459: [291/385] perl-Getopt-Std-0:1.14-517.fc 100% | 406.1 KiB/s | 15.8 KiB | 00m00s DEBUG util.py:459: [292/385] perl-MIME-Base64-0:3.16-512.f 100% | 593.9 KiB/s | 29.7 KiB | 00m00s DEBUG util.py:459: [293/385] perl-parent-1:0.244-2.fc42.no 100% | 380.6 KiB/s | 15.2 KiB | 00m00s DEBUG util.py:459: [294/385] perl-Storable-1:3.32-512.fc42 100% | 1.2 MiB/s | 103.1 KiB | 00m00s DEBUG util.py:459: [295/385] perl-ExtUtils-Command-2:7.76- 100% | 377.6 KiB/s | 14.0 KiB | 00m00s DEBUG util.py:459: [296/385] perl-B-0:1.89-517.fc42.riscv6 100% | 1.8 MiB/s | 179.4 KiB | 00m00s DEBUG util.py:459: [297/385] perl-ExtUtils-Manifest-1:1.75 100% | 669.3 KiB/s | 34.1 KiB | 00m00s DEBUG util.py:459: [298/385] perl-IO-0:1.55-517.fc42.riscv 100% | 901.7 KiB/s | 77.5 KiB | 00m00s DEBUG util.py:459: [299/385] perl-POSIX-0:2.20-517.fc42.ri 100% | 1.1 MiB/s | 99.2 KiB | 00m00s DEBUG util.py:459: [300/385] perl-Test-Harness-1:3.50-2.fc 100% | 2.5 MiB/s | 258.1 KiB | 00m00s DEBUG util.py:459: [301/385] perl-lib-0:0.65-517.fc42.risc 100% | 238.9 KiB/s | 15.0 KiB | 00m00s DEBUG util.py:459: [302/385] perl-version-9:0.99.33-2.fc42 100% | 1.5 MiB/s | 62.7 KiB | 00m00s DEBUG util.py:459: [303/385] perl-podlators-1:6.0.2-3.fc42 100% | 1.4 MiB/s | 124.6 KiB | 00m00s DEBUG util.py:459: [304/385] perl-Pod-Perldoc-0:3.28.01-51 100% | 911.0 KiB/s | 80.2 KiB | 00m00s DEBUG util.py:459: [305/385] perl-mro-0:1.29-517.fc42.risc 100% | 392.9 KiB/s | 29.5 KiB | 00m00s DEBUG util.py:459: [306/385] perl-overloading-0:0.02-517.f 100% | 266.4 KiB/s | 13.1 KiB | 00m00s DEBUG util.py:459: [307/385] libXau-0:1.0.12-2.fc42.riscv6 100% | 836.4 KiB/s | 33.5 KiB | 00m00s DEBUG util.py:459: [308/385] python3-pycparser-0:2.20-19.f 100% | 1.7 MiB/s | 150.2 KiB | 00m00s DEBUG util.py:459: [309/385] abattis-cantarell-vf-fonts-0: 100% | 1.2 MiB/s | 120.3 KiB | 00m00s DEBUG util.py:459: [310/385] google-noto-sans-vf-fonts-0:2 100% | 5.1 MiB/s | 614.5 KiB | 00m00s DEBUG util.py:459: [311/385] libaom-0:3.12.0-1.fc42.riscv6 100% | 7.1 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [312/385] libyuv-0:0-0.56.20240704git96 100% | 862.8 KiB/s | 136.3 KiB | 00m00s DEBUG util.py:459: [313/385] rav1e-libs-0:0.7.1-5.fc42.ris 100% | 4.2 MiB/s | 716.1 KiB | 00m00s DEBUG util.py:459: [314/385] jbigkit-libs-0:2.1-31.fc42.ri 100% | 689.0 KiB/s | 54.4 KiB | 00m00s DEBUG util.py:459: [315/385] svt-av1-libs-0:2.3.0-1.fc42.r 100% | 6.3 MiB/s | 996.5 KiB | 00m00s DEBUG util.py:459: [316/385] liblerc-0:4.0.0-8.fc42.riscv6 100% | 1.8 MiB/s | 213.9 KiB | 00m00s DEBUG util.py:459: [317/385] nettle-0:3.10.1-1.fc42.riscv6 100% | 3.2 MiB/s | 447.5 KiB | 00m00s DEBUG util.py:459: [318/385] cups-filesystem-1:2.4.12-3.fc 100% | 287.6 KiB/s | 13.5 KiB | 00m00s DEBUG util.py:459: [319/385] avahi-libs-0:0.9~rc2-2.fc42.r 100% | 622.7 KiB/s | 69.7 KiB | 00m00s DEBUG util.py:459: [320/385] libSM-0:1.2.5-2.fc42.riscv64 100% | 1.0 MiB/s | 45.4 KiB | 00m00s DEBUG util.py:459: [321/385] libdatrie-0:0.2.13-11.fc42.ri 100% | 773.1 KiB/s | 34.0 KiB | 00m00s DEBUG util.py:459: [322/385] libICE-0:1.1.2-2.fc42.riscv64 100% | 948.6 KiB/s | 78.7 KiB | 00m00s DEBUG util.py:459: [323/385] gpgmepp-0:1.24.2-1.fc42.riscv 100% | 1.5 MiB/s | 151.6 KiB | 00m00s DEBUG util.py:459: [324/385] nspr-0:4.36.0-8.fc42.riscv64 100% | 1.4 MiB/s | 143.5 KiB | 00m00s DEBUG util.py:459: [325/385] poppler-data-0:0.4.11-9.fc42. 100% | 9.3 MiB/s | 1.9 MiB | 00m00s DEBUG util.py:459: [326/385] dbus-common-1:1.16.0-3.fc42.n 100% | 115.0 KiB/s | 14.4 KiB | 00m00s DEBUG util.py:459: [327/385] nss-softokn-0:3.111.0-2.fc42. 100% | 3.1 MiB/s | 454.7 KiB | 00m00s DEBUG util.py:459: [328/385] nss-sysinit-0:3.111.0-2.fc42. 100% | 386.8 KiB/s | 19.0 KiB | 00m00s DEBUG util.py:459: [329/385] libfontenc-0:1.1.8-3.fc42.ris 100% | 818.1 KiB/s | 32.7 KiB | 00m00s DEBUG util.py:459: [330/385] nss-util-0:3.111.0-2.fc42.ris 100% | 1.1 MiB/s | 89.8 KiB | 00m00s DEBUG util.py:459: [331/385] perl-Fcntl-0:1.18-517.fc42.ri 100% | 715.2 KiB/s | 30.0 KiB | 00m00s DEBUG util.py:459: [332/385] perl-if-0:0.61.000-517.fc42.n 100% | 321.6 KiB/s | 14.2 KiB | 00m00s DEBUG util.py:459: [333/385] perl-File-stat-0:1.14-517.fc4 100% | 419.8 KiB/s | 17.2 KiB | 00m00s DEBUG util.py:459: [334/385] perl-SelectSaver-0:1.02-517.f 100% | 304.6 KiB/s | 11.9 KiB | 00m00s DEBUG util.py:459: [335/385] perl-locale-0:1.12-517.fc42.n 100% | 372.2 KiB/s | 13.8 KiB | 00m00s DEBUG util.py:459: [336/385] perl-Socket-4:2.038-512.fc42. 100% | 1.0 MiB/s | 55.9 KiB | 00m00s DEBUG util.py:459: [337/385] perl-Benchmark-0:1.25-517.fc4 100% | 673.8 KiB/s | 27.0 KiB | 00m00s DEBUG util.py:459: [338/385] perl-Term-ANSIColor-0:5.01-51 100% | 1.1 MiB/s | 47.7 KiB | 00m00s DEBUG util.py:459: [339/385] perl-Term-Cap-0:1.18-512.fc42 100% | 481.6 KiB/s | 22.2 KiB | 00m00s DEBUG util.py:459: [340/385] perl-Pod-Simple-1:3.45-512.fc 100% | 2.1 MiB/s | 209.6 KiB | 00m00s DEBUG util.py:459: [341/385] perl-File-Temp-1:0.231.100-51 100% | 1.2 MiB/s | 59.2 KiB | 00m00s DEBUG util.py:459: [342/385] groff-base-0:1.23.0-8.fc42.ri 100% | 7.9 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [343/385] perl-HTTP-Tiny-0:0.090-2.fc42 100% | 548.8 KiB/s | 56.5 KiB | 00m00s DEBUG util.py:459: [344/385] perl-IPC-Open3-0:1.22-517.fc4 100% | 217.9 KiB/s | 22.0 KiB | 00m00s DEBUG util.py:459: [345/385] google-noto-fonts-common-0:20 100% | 426.8 KiB/s | 17.1 KiB | 00m00s DEBUG util.py:459: [346/385] python3-ply-0:3.11-26.fc42.no 100% | 1.5 MiB/s | 131.7 KiB | 00m00s DEBUG util.py:459: [347/385] dbus-libs-1:1.16.0-3.fc42.ris 100% | 1.8 MiB/s | 161.7 KiB | 00m00s DEBUG util.py:459: [348/385] gpgme-0:1.24.2-1.fc42.riscv64 100% | 2.4 MiB/s | 225.4 KiB | 00m00s DEBUG util.py:459: [349/385] libassuan-0:2.5.7-3.fc42.risc 100% | 833.4 KiB/s | 69.2 KiB | 00m00s DEBUG util.py:459: [350/385] nss-softokn-freebl-0:3.111.0- 100% | 3.4 MiB/s | 373.6 KiB | 00m00s DEBUG util.py:459: [351/385] perl-Class-Struct-0:0.68-517. 100% | 331.7 KiB/s | 22.2 KiB | 00m00s DEBUG util.py:459: [352/385] perl-Pod-Escapes-1:1.07-512.f 100% | 235.9 KiB/s | 19.8 KiB | 00m00s DEBUG util.py:459: [353/385] ncurses-0:6.5-5.20250125.fc42 100% | 4.7 MiB/s | 420.0 KiB | 00m00s DEBUG util.py:459: [354/385] perl-IO-Socket-SSL-0:2.089-2. 100% | 2.2 MiB/s | 230.2 KiB | 00m00s DEBUG util.py:459: [355/385] perl-Net-SSLeay-0:1.94-8.fc42 100% | 3.4 MiB/s | 366.1 KiB | 00m00s DEBUG util.py:459: [356/385] perl-Time-Local-2:1.350-512.f 100% | 564.9 KiB/s | 34.5 KiB | 00m00s DEBUG util.py:459: [357/385] perl-IO-Socket-IP-0:0.43-2.fc 100% | 338.9 KiB/s | 42.4 KiB | 00m00s DEBUG util.py:459: [358/385] gnupg2-0:2.4.7-2.fc42.riscv64 100% | 11.8 MiB/s | 3.0 MiB | 00m00s DEBUG util.py:459: [359/385] libgpg-error-0:1.51-2.fc42.ri 100% | 1.0 MiB/s | 234.1 KiB | 00m00s DEBUG util.py:459: [360/385] perl-AutoLoader-0:5.74-517.fc 100% | 562.9 KiB/s | 21.4 KiB | 00m00s DEBUG util.py:459: [361/385] perl-URI-0:5.31-2.fc42.noarch 100% | 977.5 KiB/s | 127.1 KiB | 00m00s DEBUG util.py:459: [362/385] npth-0:1.8-2.fc42.riscv64 100% | 624.9 KiB/s | 25.0 KiB | 00m00s DEBUG util.py:459: [363/385] libgcrypt-0:1.11.0-3.fc41.ris 100% | 4.7 MiB/s | 573.6 KiB | 00m00s DEBUG util.py:459: [364/385] libksba-0:1.6.7-3.fc42.riscv6 100% | 1.6 MiB/s | 167.6 KiB | 00m00s DEBUG util.py:459: [365/385] perl-MIME-Base32-0:1.303-23.f 100% | 366.3 KiB/s | 20.5 KiB | 00m00s DEBUG util.py:459: [366/385] perl-FileHandle-0:2.05-517.fc 100% | 340.2 KiB/s | 15.6 KiB | 00m00s DEBUG util.py:459: [367/385] perl-Digest-MD5-0:2.59-6.fc42 100% | 707.0 KiB/s | 36.8 KiB | 00m00s DEBUG util.py:459: [368/385] perl-libnet-0:3.15-513.fc42.n 100% | 1.6 MiB/s | 122.9 KiB | 00m00s DEBUG util.py:459: [369/385] perl-Digest-0:1.20-512.fc42.n 100% | 554.1 KiB/s | 24.9 KiB | 00m00s DEBUG util.py:459: [370/385] gcc-plugin-annobin-0:15.1.1-2 100% | 1.2 MiB/s | 50.7 KiB | 00m00s DEBUG util.py:459: [371/385] systemd-rpm-macros-0:257.6-1. 100% | 510.9 KiB/s | 36.3 KiB | 00m00s DEBUG util.py:459: [372/385] annobin-plugin-gcc-0:12.94-1. 100% | 6.3 MiB/s | 980.7 KiB | 00m00s DEBUG util.py:459: [373/385] annobin-docs-0:12.94-1.fc42.n 100% | 659.4 KiB/s | 90.3 KiB | 00m00s DEBUG util.py:459: [374/385] pyproject-rpm-macros-0:1.18.1 100% | 772.7 KiB/s | 44.8 KiB | 00m00s DEBUG util.py:459: [375/385] python-rpm-macros-0:3.13-4.fc 100% | 434.1 KiB/s | 16.9 KiB | 00m00s DEBUG util.py:459: [376/385] python3-rpm-macros-0:3.13-4.f 100% | 292.6 KiB/s | 11.7 KiB | 00m00s DEBUG util.py:459: [377/385] python3-rpm-generators-0:14-1 100% | 521.1 KiB/s | 29.2 KiB | 00m00s DEBUG util.py:459: [378/385] authselect-libs-0:1.5.1-1.fc4 100% | 2.0 MiB/s | 205.9 KiB | 00m00s DEBUG util.py:459: [379/385] pam-0:1.7.0-6.fc42.riscv64 100% | 4.6 MiB/s | 528.4 KiB | 00m00s DEBUG util.py:459: [380/385] authselect-0:1.5.1-1.fc42.ris 100% | 1.3 MiB/s | 142.2 KiB | 00m00s DEBUG util.py:459: [381/385] gdbm-1:1.23-9.fc42.riscv64 100% | 1.5 MiB/s | 151.8 KiB | 00m00s DEBUG util.py:459: [382/385] libnsl2-0:2.0.1-3.fc42.riscv6 100% | 532.5 KiB/s | 29.8 KiB | 00m00s DEBUG util.py:459: [383/385] libpwquality-0:1.4.5-12.fc42. 100% | 1.3 MiB/s | 107.3 KiB | 00m00s DEBUG util.py:459: [384/385] libtirpc-0:1.3.6-1.rc3.fc42.2 100% | 1.1 MiB/s | 103.9 KiB | 00m00s DEBUG util.py:459: [385/385] cracklib-0:2.9.11-7.fc42.risc 100% | 874.7 KiB/s | 81.3 KiB | 00m00s DEBUG util.py:459: -------------------------------------------------------------------------------- DEBUG util.py:459: [385/385] Total 100% | 15.5 MiB/s | 556.9 MiB | 00m36s DEBUG util.py:459: Running transaction DEBUG util.py:459: [ 1/387] Verify package files 100% | 21.0 B/s | 385.0 B | 00m18s DEBUG util.py:459: [ 2/387] Prepare transaction 100% | 341.0 B/s | 385.0 B | 00m01s DEBUG util.py:459: [ 3/387] Installing nspr-0:4.36.0-8.fc 100% | 12.0 MiB/s | 308.4 KiB | 00m00s DEBUG util.py:459: [ 4/387] Installing libjpeg-turbo-0:3. 100% | 21.0 MiB/s | 622.6 KiB | 00m00s DEBUG util.py:459: [ 5/387] Installing libpng-2:1.6.44-2. 100% | 12.9 MiB/s | 211.2 KiB | 00m00s DEBUG util.py:459: [ 6/387] Installing libgpg-error-0:1.5 100% | 8.1 MiB/s | 884.1 KiB | 00m00s DEBUG util.py:459: [ 7/387] Installing fonts-filesystem-1 100% | 128.3 KiB/s | 788.0 B | 00m00s DEBUG util.py:459: [ 8/387] Installing urw-base35-fonts-c 100% | 4.7 MiB/s | 38.4 KiB | 00m00s DEBUG util.py:459: [ 9/387] Installing expat-0:2.7.1-1.fc 100% | 3.5 MiB/s | 275.7 KiB | 00m00s DEBUG util.py:459: [ 10/387] Installing nss-util-0:3.111.0 100% | 14.4 MiB/s | 221.5 KiB | 00m00s DEBUG util.py:459: [ 11/387] Installing libedit-0:3.1-55.2 100% | 9.4 MiB/s | 229.9 KiB | 00m00s DEBUG util.py:459: [ 12/387] Installing kernel-headers-0:6 100% | 14.5 MiB/s | 6.6 MiB | 00m00s DEBUG util.py:459: [ 13/387] Installing libxcrypt-devel-0: 100% | 2.2 MiB/s | 33.1 KiB | 00m00s DEBUG util.py:459: [ 14/387] Installing glibc-devel-0:2.41 100% | 11.8 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [ 15/387] Installing kmod-0:33-3.fc42.r 100% | 2.8 MiB/s | 232.6 KiB | 00m00s DEBUG util.py:459: [ 16/387] Installing libassuan-0:2.5.7- 100% | 10.5 MiB/s | 161.6 KiB | 00m00s DEBUG util.py:459: [ 17/387] Installing python-rpm-macros- 100% | 2.8 MiB/s | 22.8 KiB | 00m00s DEBUG util.py:459: [ 18/387] Installing libseccomp-0:2.5.5 100% | 11.2 MiB/s | 171.4 KiB | 00m00s DEBUG util.py:459: [ 19/387] Installing llvm-filesystem-0: 100% | 176.4 KiB/s | 1.1 KiB | 00m00s DEBUG util.py:459: [ 20/387] Installing llvm-libs-0:20.1.5 100% | 30.8 MiB/s | 120.6 MiB | 00m04s DEBUG util.py:459: [ 21/387] Installing libwebp-0:1.5.0-2. 100% | 10.7 MiB/s | 589.5 KiB | 00m00s DEBUG util.py:459: [ 22/387] Installing xml-common-0:0.6.3 100% | 6.1 MiB/s | 81.1 KiB | 00m00s DEBUG util.py:459: [ 23/387] Installing libmpc-0:1.3.1-7.f 100% | 8.9 MiB/s | 145.8 KiB | 00m00s DEBUG util.py:459: [ 24/387] Installing libzstd-devel-0:1. 100% | 15.7 MiB/s | 208.8 KiB | 00m00s DEBUG util.py:459: [ 25/387] Installing kmod-libs-0:33-3.f 100% | 9.5 MiB/s | 136.5 KiB | 00m00s DEBUG util.py:459: [ 26/387] Installing systemd-shared-0:2 100% | 24.9 MiB/s | 4.3 MiB | 00m00s DEBUG util.py:459: [ 27/387] Installing python3-rpm-macros 100% | 1.1 MiB/s | 6.7 KiB | 00m00s DEBUG util.py:459: [ 28/387] Installing libtirpc-0:1.3.6-1 100% | 11.3 MiB/s | 196.3 KiB | 00m00s DEBUG util.py:459: [ 29/387] Installing libICE-0:1.1.2-2.f 100% | 12.2 MiB/s | 187.4 KiB | 00m00s DEBUG util.py:459: [ 30/387] Installing libdav1d-0:1.5.1-1 100% | 18.5 MiB/s | 530.8 KiB | 00m00s DEBUG util.py:459: [ 31/387] Installing openjpeg-0:2.5.3-6 100% | 15.7 MiB/s | 385.3 KiB | 00m00s DEBUG util.py:459: [ 32/387] Installing lcms2-0:2.16-5.fc4 100% | 15.4 MiB/s | 410.0 KiB | 00m00s DEBUG util.py:459: [ 33/387] Installing adobe-mappings-cma 100% | 26.6 MiB/s | 15.2 MiB | 00m01s DEBUG util.py:459: [ 34/387] Installing slang-0:2.3.3-7.fc 100% | 25.5 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [ 35/387] Installing libssh2-0:1.11.1-3 100% | 13.2 MiB/s | 284.7 KiB | 00m00s DEBUG util.py:459: [ 36/387] Installing libyaml-0:0.2.5-16 100% | 8.1 MiB/s | 115.5 KiB | 00m00s DEBUG util.py:459: [ 37/387] Installing pciutils-libs-0:3. 100% | 6.9 MiB/s | 91.8 KiB | 00m00s DEBUG util.py:459: [ 38/387] Installing libaio-0:0.3.111-2 100% | 4.8 MiB/s | 49.5 KiB | 00m00s DEBUG util.py:459: [ 39/387] Installing cmake-filesystem-0 100% | 506.0 KiB/s | 7.6 KiB | 00m00s DEBUG util.py:459: [ 40/387] Installing zlib-ng-compat-dev 100% | 8.8 MiB/s | 108.5 KiB | 00m00s DEBUG util.py:459: [ 41/387] Installing elfutils-libelf-de 100% | 3.2 MiB/s | 55.5 KiB | 00m00s DEBUG util.py:459: [ 42/387] Installing libtraceevent-0:1. 100% | 16.0 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [ 43/387] Installing libbpf-2:1.5.0-2.f 100% | 17.0 MiB/s | 383.0 KiB | 00m00s DEBUG util.py:459: [ 44/387] Installing libtextstyle-0:0.2 100% | 15.3 MiB/s | 281.7 KiB | 00m00s DEBUG util.py:459: [ 45/387] Installing gettext-libs-0:0.2 100% | 24.7 MiB/s | 2.0 MiB | 00m00s DEBUG util.py:459: [ 46/387] Installing libatomic-0:15.1.1 100% | 1.9 MiB/s | 25.0 KiB | 00m00s DEBUG util.py:459: [ 47/387] Installing libstdc++-devel-0: 100% | 31.0 MiB/s | 32.8 MiB | 00m01s DEBUG util.py:459: [ 48/387] Installing libxslt-0:1.1.43-1 100% | 4.8 MiB/s | 418.4 KiB | 00m00s DEBUG util.py:459: [ 49/387] Installing m4-0:1.4.19-12.fc4 100% | 5.9 MiB/s | 600.5 KiB | 00m00s DEBUG util.py:459: [ 50/387] Installing flex-0:2.6.4-19.fc 100% | 8.3 MiB/s | 931.8 KiB | 00m00s DEBUG util.py:459: [ 51/387] Installing numactl-libs-0:2.0 100% | 5.6 MiB/s | 57.7 KiB | 00m00s DEBUG util.py:459: [ 52/387] Installing libtraceevent-deve 100% | 3.0 MiB/s | 30.2 KiB | 00m00s DEBUG util.py:459: [ 53/387] Installing libtracefs-0:1.8.1 100% | 17.8 MiB/s | 2.1 MiB | 00m00s DEBUG util.py:459: [ 54/387] Installing ctags-0:6.1.0-2.fc 100% | 19.4 MiB/s | 3.7 MiB | 00m00s DEBUG util.py:459: [ 55/387] Installing newt-0:0.52.25-1.f 100% | 2.0 MiB/s | 210.3 KiB | 00m00s DEBUG util.py:459: [ 56/387] Installing slang-devel-0:2.3. 100% | 24.1 MiB/s | 914.6 KiB | 00m00s DEBUG util.py:459: [ 57/387] Installing adobe-mappings-cma 100% | 17.3 MiB/s | 585.2 KiB | 00m00s DEBUG util.py:459: [ 58/387] Installing libSM-0:1.2.5-2.fc 100% | 8.0 MiB/s | 98.1 KiB | 00m00s DEBUG util.py:459: [ 59/387] Installing libnsl2-0:2.0.1-3. 100% | 5.7 MiB/s | 58.7 KiB | 00m00s DEBUG util.py:459: [ 60/387] Installing pyproject-rpm-macr 100% | 8.1 MiB/s | 116.4 KiB | 00m00s DEBUG util.py:459: [ 61/387] Installing cpp-0:15.1.1-2.fc4 100% | 28.2 MiB/s | 48.8 MiB | 00m02s DEBUG util.py:459: [ 62/387] Installing lld-libs-0:20.1.5- 100% | 27.3 MiB/s | 5.6 MiB | 00m00s DEBUG util.py:459: [ 63/387] Installing llvm-googletest-0: 100% | 31.2 MiB/s | 6.2 MiB | 00m00s DEBUG util.py:459: [ 64/387] Installing llvm-static-0:20.1 100% | 36.8 MiB/s | 1.0 GiB | 00m28s DEBUG util.py:459: [ 65/387] Installing libxcrypt-static-0 100% | 29.8 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [ 66/387] Installing glibc-static-0:2.4 100% | 36.5 MiB/s | 30.2 MiB | 00m01s DEBUG util.py:459: [ 67/387] Installing libcap-ng-devel-0: 100% | 1.6 MiB/s | 20.8 KiB | 00m00s DEBUG util.py:459: [ 68/387] Installing nss-softokn-freebl 100% | 18.6 MiB/s | 741.2 KiB | 00m00s DEBUG util.py:459: [ 69/387] Installing nss-softokn-0:3.11 100% | 25.7 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [ 70/387] Installing nss-sysinit-0:3.11 100% | 286.6 KiB/s | 18.9 KiB | 00m00s DEBUG util.py:459: [ 71/387] Installing nss-0:3.111.0-2.fc 100% | 17.1 MiB/s | 1.7 MiB | 00m00s DEBUG util.py:459: [ 72/387] Installing graphviz-libs-0:12 100% | 20.3 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [ 73/387] Installing urw-base35-bookman 100% | 17.5 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [ 74/387] Installing urw-base35-c059-fo 100% | 19.9 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [ 75/387] Installing urw-base35-d050000 100% | 2.9 MiB/s | 85.4 KiB | 00m00s DEBUG util.py:459: [ 76/387] Installing urw-base35-gothic- 100% | 18.2 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [ 77/387] Installing urw-base35-nimbus- 100% | 18.1 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [ 78/387] Installing urw-base35-nimbus- 100% | 19.0 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [ 79/387] Installing urw-base35-nimbus- 100% | 23.0 MiB/s | 2.4 MiB | 00m00s DEBUG util.py:459: [ 80/387] Installing urw-base35-p052-fo 100% | 20.4 MiB/s | 1.5 MiB | 00m00s DEBUG util.py:459: [ 81/387] Installing urw-base35-standar 100% | 2.2 MiB/s | 66.0 KiB | 00m00s DEBUG util.py:459: [ 82/387] Installing urw-base35-z003-fo 100% | 9.8 MiB/s | 391.8 KiB | 00m00s DEBUG util.py:459: [ 83/387] Installing urw-base35-fonts-0 100% | 806.4 KiB/s | 5.6 KiB | 00m00s DEBUG util.py:459: [ 84/387] Installing google-droid-sans- 100% | 26.3 MiB/s | 6.3 MiB | 00m00s DEBUG util.py:459: [ 85/387] Installing abattis-cantarell- 100% | 11.2 MiB/s | 194.4 KiB | 00m00s DEBUG util.py:459: [ 86/387] Installing libgcrypt-0:1.11.0 100% | 21.5 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [ 87/387] Installing libksba-0:1.6.7-3. 100% | 14.9 MiB/s | 397.5 KiB | 00m00s DEBUG util.py:459: [ 88/387] Installing libyuv-0:0-0.56.20 100% | 15.0 MiB/s | 338.3 KiB | 00m00s DEBUG util.py:459: [ 89/387] Installing cracklib-0:2.9.11- 100% | 2.3 MiB/s | 244.5 KiB | 00m00s DEBUG util.py:459: [ 90/387] Installing libpwquality-0:1.4 100% | 3.8 MiB/s | 416.4 KiB | 00m00s DEBUG util.py:459: [ 91/387] Installing gdbm-1:1.23-9.fc42 100% | 5.1 MiB/s | 473.5 KiB | 00m00s DEBUG util.py:459: [ 92/387] Installing authselect-libs-0: 100% | 12.7 MiB/s | 834.3 KiB | 00m00s DEBUG util.py:459: [ 93/387] Installing annobin-docs-0:12. 100% | 9.8 MiB/s | 100.0 KiB | 00m00s DEBUG util.py:459: [ 94/387] Installing npth-0:1.8-2.fc42. 100% | 4.9 MiB/s | 50.3 KiB | 00m00s DEBUG util.py:459: [ 95/387] Installing ncurses-0:6.5-5.20 100% | 5.6 MiB/s | 613.2 KiB | 00m00s DEBUG util.py:459: [ 96/387] Installing dbus-libs-1:1.16.0 100% | 15.1 MiB/s | 341.0 KiB | 00m00s DEBUG util.py:459: [ 97/387] Installing avahi-libs-0:0.9~r 100% | 8.2 MiB/s | 160.0 KiB | 00m00s DEBUG util.py:459: [ 98/387] Installing google-noto-fonts- 100% | 2.6 MiB/s | 18.5 KiB | 00m00s DEBUG util.py:459: [ 99/387] Installing google-noto-sans-v 100% | 23.2 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [100/387] Installing default-fonts-core 100% | 443.7 KiB/s | 18.2 KiB | 00m00s DEBUG util.py:459: [101/387] Installing groff-base-0:1.23. 100% | 15.1 MiB/s | 4.4 MiB | 00m00s DEBUG util.py:459: [102/387] Installing perl-Digest-0:1.20 100% | 3.3 MiB/s | 37.1 KiB | 00m00s DEBUG util.py:459: [103/387] Installing perl-B-0:1.89-517. 100% | 17.1 MiB/s | 509.0 KiB | 00m00s DEBUG util.py:459: [104/387] Installing perl-FileHandle-0: 100% | 1.2 MiB/s | 9.8 KiB | 00m00s DEBUG util.py:459: [105/387] Installing perl-Digest-MD5-0: 100% | 5.0 MiB/s | 61.3 KiB | 00m00s DEBUG util.py:459: [106/387] Installing perl-Data-Dumper-0 100% | 7.3 MiB/s | 105.2 KiB | 00m00s DEBUG util.py:459: [107/387] Installing perl-MIME-Base32-0 100% | 3.1 MiB/s | 32.2 KiB | 00m00s DEBUG util.py:459: [108/387] Installing perl-libnet-0:3.15 100% | 10.7 MiB/s | 294.7 KiB | 00m00s DEBUG util.py:459: [109/387] Installing perl-IO-Socket-IP- 100% | 7.7 MiB/s | 102.2 KiB | 00m00s DEBUG util.py:459: [110/387] Installing perl-AutoLoader-0: 100% | 2.6 MiB/s | 20.9 KiB | 00m00s DEBUG util.py:459: [111/387] Installing perl-URI-0:5.31-2. 100% | 6.8 MiB/s | 269.6 KiB | 00m00s DEBUG util.py:459: [112/387] Installing perl-Text-Tabs+Wra 100% | 2.6 MiB/s | 23.9 KiB | 00m00s DEBUG util.py:459: [113/387] Installing perl-File-Path-0:2 100% | 7.0 MiB/s | 64.5 KiB | 00m00s DEBUG util.py:459: [114/387] Installing perl-if-0:0.61.000 100% | 886.2 KiB/s | 6.2 KiB | 00m00s DEBUG util.py:459: [115/387] Installing perl-locale-0:1.12 100% | 986.0 KiB/s | 6.9 KiB | 00m00s DEBUG util.py:459: [116/387] Installing perl-Pod-Escapes-1 100% | 3.2 MiB/s | 25.9 KiB | 00m00s DEBUG util.py:459: [117/387] Installing perl-Time-Local-2: 100% | 5.7 MiB/s | 70.6 KiB | 00m00s DEBUG util.py:459: [118/387] Installing perl-Net-SSLeay-0: 100% | 16.3 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [119/387] Installing perl-IO-Socket-SSL 100% | 17.7 MiB/s | 707.4 KiB | 00m00s DEBUG util.py:459: [120/387] Installing perl-POSIX-0:2.20- 100% | 13.3 MiB/s | 232.0 KiB | 00m00s DEBUG util.py:459: [121/387] Installing perl-Term-ANSIColo 100% | 6.9 MiB/s | 99.2 KiB | 00m00s DEBUG util.py:459: [122/387] Installing perl-Term-Cap-0:1. 100% | 3.0 MiB/s | 30.6 KiB | 00m00s DEBUG util.py:459: [123/387] Installing perl-File-Temp-1:0 100% | 10.7 MiB/s | 164.1 KiB | 00m00s DEBUG util.py:459: [124/387] Installing perl-IPC-Open3-0:1 100% | 2.8 MiB/s | 23.3 KiB | 00m00s DEBUG util.py:459: [125/387] Installing perl-Class-Struct- 100% | 3.2 MiB/s | 25.9 KiB | 00m00s DEBUG util.py:459: [126/387] Installing perl-Pod-Simple-1: 100% | 13.9 MiB/s | 570.4 KiB | 00m00s DEBUG util.py:459: [127/387] Installing perl-HTTP-Tiny-0:0 100% | 9.5 MiB/s | 156.4 KiB | 00m00s DEBUG util.py:459: [128/387] Installing perl-Symbol-0:1.09 100% | 1.0 MiB/s | 7.2 KiB | 00m00s DEBUG util.py:459: [129/387] Installing perl-SelectSaver-0 100% | 368.3 KiB/s | 2.6 KiB | 00m00s DEBUG util.py:459: [130/387] Installing perl-Socket-4:2.03 100% | 7.7 MiB/s | 125.7 KiB | 00m00s DEBUG util.py:459: [131/387] Installing perl-File-stat-0:1 100% | 1.6 MiB/s | 13.1 KiB | 00m00s DEBUG util.py:459: [132/387] Installing perl-podlators-1:6 100% | 3.8 MiB/s | 321.4 KiB | 00m00s DEBUG util.py:459: [133/387] Installing perl-Pod-Perldoc-0 100% | 1.8 MiB/s | 169.2 KiB | 00m00s DEBUG util.py:459: [134/387] Installing perl-Text-ParseWor 100% | 162.0 KiB/s | 14.6 KiB | 00m00s DEBUG util.py:459: [135/387] Installing perl-base-0:2.27-5 100% | 995.5 KiB/s | 12.9 KiB | 00m00s DEBUG util.py:459: [136/387] Installing perl-mro-0:1.29-51 100% | 2.3 MiB/s | 38.3 KiB | 00m00s DEBUG util.py:459: [137/387] Installing perl-overloading-0 100% | 395.6 KiB/s | 5.5 KiB | 00m00s DEBUG util.py:459: [138/387] Installing perl-Fcntl-0:1.18- 100% | 3.0 MiB/s | 49.7 KiB | 00m00s DEBUG util.py:459: [139/387] Installing perl-IO-0:1.55-517 100% | 4.9 MiB/s | 147.0 KiB | 00m00s DEBUG util.py:459: [140/387] Installing perl-Pod-Usage-4:2 100% | 1.1 MiB/s | 87.9 KiB | 00m00s DEBUG util.py:459: [141/387] Installing perl-vars-0:1.05-5 100% | 304.7 KiB/s | 4.3 KiB | 00m00s DEBUG util.py:459: [142/387] Installing perl-File-Basename 100% | 808.8 KiB/s | 14.6 KiB | 00m00s DEBUG util.py:459: [143/387] Installing perl-Errno-0:1.38- 100% | 485.2 KiB/s | 8.7 KiB | 00m00s DEBUG util.py:459: [144/387] Installing perl-Scalar-List-U 100% | 4.9 MiB/s | 140.2 KiB | 00m00s DEBUG util.py:459: [145/387] Installing perl-constant-0:1. 100% | 1.3 MiB/s | 27.4 KiB | 00m00s DEBUG util.py:459: [146/387] Installing perl-Getopt-Std-0: 100% | 651.5 KiB/s | 11.7 KiB | 00m00s DEBUG util.py:459: [147/387] Installing perl-MIME-Base64-0 100% | 1.7 MiB/s | 44.0 KiB | 00m00s DEBUG util.py:459: [148/387] Installing perl-parent-1:0.24 100% | 783.5 KiB/s | 11.0 KiB | 00m00s DEBUG util.py:459: [149/387] Installing perl-overload-0:1. 100% | 4.4 MiB/s | 71.9 KiB | 00m00s DEBUG util.py:459: [150/387] Installing perl-Storable-1:3. 100% | 8.3 MiB/s | 213.6 KiB | 00m00s DEBUG util.py:459: [151/387] Installing perl-Getopt-Long-1 100% | 6.5 MiB/s | 147.2 KiB | 00m00s DEBUG util.py:459: [152/387] Installing perl-Exporter-0:5. 100% | 2.5 MiB/s | 55.6 KiB | 00m00s DEBUG util.py:459: [153/387] Installing perl-PathTools-0:3 100% | 5.2 MiB/s | 180.3 KiB | 00m00s DEBUG util.py:459: [154/387] Installing perl-DynaLoader-0: 100% | 1.5 MiB/s | 32.5 KiB | 00m00s DEBUG util.py:459: [155/387] Installing perl-Encode-4:3.21 100% | 26.5 MiB/s | 9.6 MiB | 00m00s DEBUG util.py:459: [156/387] Installing perl-Carp-0:1.54-5 100% | 2.2 MiB/s | 47.7 KiB | 00m00s DEBUG util.py:459: [157/387] Installing perl-libs-4:5.40.2 100% | 19.3 MiB/s | 9.7 MiB | 00m01s DEBUG util.py:459: [158/387] Installing perl-interpreter-4 100% | 1.4 MiB/s | 119.7 KiB | 00m00s DEBUG util.py:459: [159/387] Installing perl-File-Find-0:1 100% | 376.0 KiB/s | 42.5 KiB | 00m00s DEBUG util.py:459: [160/387] Installing perl-File-Copy-0:2 100% | 1.3 MiB/s | 20.2 KiB | 00m00s DEBUG util.py:459: [161/387] Installing perl-ExtUtils-Pars 100% | 4.0 MiB/s | 405.1 KiB | 00m00s DEBUG util.py:459: [162/387] Installing perl-File-Compare- 100% | 322.6 KiB/s | 6.1 KiB | 00m00s DEBUG util.py:459: [163/387] Installing perl-ExtUtils-Comm 100% | 726.8 KiB/s | 10.2 KiB | 00m00s DEBUG util.py:459: [164/387] Installing perl-ExtUtils-Mani 100% | 3.7 MiB/s | 86.3 KiB | 00m00s DEBUG util.py:459: [165/387] Installing perl-macros-4:5.40 100% | 321.0 KiB/s | 5.8 KiB | 00m00s DEBUG util.py:459: [166/387] Installing perl-Devel-PPPort- 100% | 18.2 MiB/s | 877.8 KiB | 00m00s DEBUG util.py:459: [167/387] Installing perl-ExtUtils-Cons 100% | 3.6 MiB/s | 87.6 KiB | 00m00s DEBUG util.py:459: [168/387] Installing perl-Fedora-VSP-0: 100% | 2.0 MiB/s | 40.6 KiB | 00m00s DEBUG util.py:459: [169/387] Installing perl-AutoSplit-0:5 100% | 1.6 MiB/s | 23.5 KiB | 00m00s DEBUG util.py:459: [170/387] Installing perl-lib-0:0.65-51 100% | 635.9 KiB/s | 8.9 KiB | 00m00s DEBUG util.py:459: [171/387] Installing perl-version-9:0.9 100% | 5.2 MiB/s | 127.3 KiB | 00m00s DEBUG util.py:459: [172/387] Installing perl-Benchmark-0:1 100% | 1.8 MiB/s | 36.7 KiB | 00m00s DEBUG util.py:459: [173/387] Installing perl-Test-Harness- 100% | 4.2 MiB/s | 582.4 KiB | 00m00s DEBUG util.py:459: [174/387] Installing perl-ExtUtils-Inst 100% | 4.3 MiB/s | 87.2 KiB | 00m00s DEBUG util.py:459: [175/387] Installing perl-ExtUtils-Make 100% | 6.3 MiB/s | 750.3 KiB | 00m00s DEBUG util.py:459: [176/387] Installing libfontenc-0:1.1.8 100% | 347.6 KiB/s | 67.8 KiB | 00m00s DEBUG util.py:459: >>> Running sysusers scriptlet: dbus-common-1:1.16.0-3.fc42.noarch DEBUG util.py:459: >>> Finished sysusers scriptlet: dbus-common-1:1.16.0-3.fc42.noarch DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating group 'dbus' with GID 81. DEBUG util.py:459: >>> Creating user 'dbus' (System Message Bus) with UID 81 and GID 81. DEBUG util.py:459: >>> DEBUG util.py:459: [177/387] Installing dbus-common-1:1.16 100% | 215.1 KiB/s | 13.6 KiB | 00m00s DEBUG util.py:459: [178/387] Installing dbus-broker-0:36-5 100% | 3.1 MiB/s | 383.2 KiB | 00m00s DEBUG util.py:459: [179/387] Installing dbus-1:1.16.0-3.fc 100% | 10.1 KiB/s | 124.0 B | 00m00s DEBUG util.py:459: [180/387] Installing systemd-pam-0:257. 100% | 4.0 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: >>> Running sysusers scriptlet: systemd-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Finished sysusers scriptlet: systemd-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating group 'systemd-journal' with GID 190. DEBUG util.py:459: >>> DEBUG util.py:459: >>> Running sysusers scriptlet: systemd-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Finished sysusers scriptlet: systemd-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating group 'systemd-oom' with GID 999. DEBUG util.py:459: >>> Creating user 'systemd-oom' (systemd Userspace OOM Killer) with UID 999 and DEBUG util.py:459: >>> DEBUG util.py:459: [181/387] Installing systemd-0:257.6-1. 100% | 10.8 MiB/s | 11.8 MiB | 00m01s DEBUG util.py:459: [182/387] Installing device-mapper-libs 100% | 11.9 MiB/s | 391.2 KiB | 00m00s DEBUG util.py:459: [183/387] Installing device-mapper-0:1. 100% | 3.6 MiB/s | 343.7 KiB | 00m00s DEBUG util.py:459: [184/387] Installing device-mapper-even 100% | 2.9 MiB/s | 54.3 KiB | 00m00s DEBUG util.py:459: [185/387] Installing device-mapper-even 100% | 325.4 KiB/s | 47.5 KiB | 00m00s DEBUG util.py:459: >>> Running post-install scriptlet: device-mapper-event-0:1.02.204-3.fc42.riscv6 DEBUG util.py:459: >>> Finished post-install scriptlet: device-mapper-event-0:1.02.204-3.fc42.riscv DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Created symlink '/etc/systemd/system/sockets.target.wants/dm-event.socket' → DEBUG util.py:459: >>> DEBUG util.py:459: [186/387] Installing lvm2-libs-0:2.03.3 100% | 14.3 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [187/387] Installing cryptsetup-libs-0: 100% | 21.5 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [188/387] Installing libkcapi-0:1.5.0-5 100% | 4.1 MiB/s | 92.9 KiB | 00m00s DEBUG util.py:459: [189/387] Installing libkcapi-hasher-0: 100% | 540.9 KiB/s | 40.6 KiB | 00m00s DEBUG util.py:459: [190/387] Installing libkcapi-hmaccalc- 100% | 15.1 KiB/s | 1.1 KiB | 00m00s DEBUG util.py:459: [191/387] Installing poppler-data-0:0.4 100% | 25.1 MiB/s | 12.4 MiB | 00m00s DEBUG util.py:459: [192/387] Installing libdatrie-0:0.2.13 100% | 3.9 MiB/s | 63.3 KiB | 00m00s DEBUG util.py:459: [193/387] Installing libthai-0:0.1.29-1 100% | 16.9 MiB/s | 781.0 KiB | 00m00s DEBUG util.py:459: [194/387] Installing cups-filesystem-1: 100% | 127.2 KiB/s | 1.8 KiB | 00m00s DEBUG util.py:459: [195/387] Installing nettle-0:3.10.1-1. 100% | 16.6 MiB/s | 747.3 KiB | 00m00s DEBUG util.py:459: [196/387] Installing gnutls-0:3.8.8-3.f 100% | 23.2 MiB/s | 3.1 MiB | 00m00s DEBUG util.py:459: [197/387] Installing glib2-0:2.84.2-1.f 100% | 24.9 MiB/s | 14.8 MiB | 00m01s DEBUG util.py:459: [198/387] Installing cups-libs-1:2.4.12 100% | 15.6 MiB/s | 639.8 KiB | 00m00s DEBUG util.py:459: [199/387] Installing libbabeltrace-0:1. 100% | 11.9 MiB/s | 524.8 KiB | 00m00s DEBUG util.py:459: [200/387] Installing shared-mime-info-0 100% | 13.9 MiB/s | 2.6 MiB | 00m00s DEBUG util.py:459: [201/387] Installing gdk-pixbuf2-0:2.42 100% | 12.7 MiB/s | 2.5 MiB | 00m00s DEBUG util.py:459: [202/387] Installing liblerc-0:4.0.0-8. 100% | 15.6 MiB/s | 557.5 KiB | 00m00s DEBUG util.py:459: [203/387] Installing jbigkit-libs-0:2.1 100% | 5.4 MiB/s | 110.8 KiB | 00m00s DEBUG util.py:459: [204/387] Installing libtiff-0:4.7.0-3. 100% | 15.2 MiB/s | 559.6 KiB | 00m00s DEBUG util.py:459: [205/387] Installing svt-av1-libs-0:2.3 100% | 22.6 MiB/s | 2.3 MiB | 00m00s DEBUG util.py:459: [206/387] Installing rav1e-libs-0:0.7.1 100% | 22.6 MiB/s | 1.7 MiB | 00m00s DEBUG util.py:459: [207/387] Installing libaom-0:3.12.0-1. 100% | 23.7 MiB/s | 2.7 MiB | 00m00s DEBUG util.py:459: [208/387] Installing libavif-0:1.1.1-1. 100% | 8.5 MiB/s | 200.1 KiB | 00m00s DEBUG util.py:459: [209/387] Installing libXau-0:1.0.12-2. 100% | 3.8 MiB/s | 70.1 KiB | 00m00s DEBUG util.py:459: [210/387] Installing libxcb-0:1.17.0-5. 100% | 15.6 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [211/387] Installing pcre2-utf32-0:10.4 100% | 16.3 MiB/s | 518.4 KiB | 00m00s DEBUG util.py:459: [212/387] Installing pcre2-utf16-0:10.4 100% | 16.1 MiB/s | 542.5 KiB | 00m00s DEBUG util.py:459: [213/387] Installing pcre2-devel-0:10.4 100% | 11.6 MiB/s | 2.1 MiB | 00m00s DEBUG util.py:459: [214/387] Installing libsepol-devel-0:3 100% | 4.0 MiB/s | 128.3 KiB | 00m00s DEBUG util.py:459: [215/387] Installing libselinux-devel-0 100% | 2.3 MiB/s | 161.6 KiB | 00m00s DEBUG util.py:459: [216/387] Installing libblkid-devel-0:2 100% | 3.0 MiB/s | 46.0 KiB | 00m00s DEBUG util.py:459: [217/387] Installing libmount-devel-0:2 100% | 4.2 MiB/s | 64.5 KiB | 00m00s DEBUG util.py:459: [218/387] Installing tzdata-java-0:2025 100% | 6.5 MiB/s | 100.5 KiB | 00m00s DEBUG util.py:459: [219/387] Installing lksctp-tools-0:1.0 100% | 2.9 MiB/s | 257.6 KiB | 00m00s DEBUG util.py:459: [220/387] Installing javapackages-files 100% | 325.8 KiB/s | 5.5 KiB | 00m00s DEBUG util.py:459: [221/387] Installing alsa-lib-0:1.2.14- 100% | 9.4 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [222/387] Installing java-21-openjdk-he 100% | 30.6 MiB/s | 199.4 MiB | 00m07s DEBUG util.py:459: [223/387] Installing libcbor-0:0.11.0-3 100% | 4.3 MiB/s | 74.9 KiB | 00m00s DEBUG util.py:459: [224/387] Installing libfido2-0:1.15.0- 100% | 7.7 MiB/s | 228.4 KiB | 00m00s DEBUG util.py:459: [225/387] Installing llhttp-0:9.2.1-5.f 100% | 2.4 MiB/s | 77.3 KiB | 00m00s DEBUG util.py:459: [226/387] Installing libgit2-0:1.9.0-4. 100% | 9.8 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [227/387] Installing libicu-0:76.1-4.fc 100% | 27.2 MiB/s | 36.1 MiB | 00m01s DEBUG util.py:459: [228/387] Installing boost-regex-0:1.83 100% | 9.8 MiB/s | 260.9 KiB | 00m00s DEBUG util.py:459: [229/387] Installing source-highlight-0 100% | 13.5 MiB/s | 3.4 MiB | 00m00s DEBUG util.py:459: [230/387] Installing fribidi-0:1.0.16-2 100% | 2.4 MiB/s | 196.3 KiB | 00m00s DEBUG util.py:459: [231/387] Installing libpaper-1:2.1.1-8 100% | 3.1 MiB/s | 50.2 KiB | 00m00s DEBUG util.py:459: [232/387] Installing libijs-0:0.35-24.f 100% | 4.1 MiB/s | 62.2 KiB | 00m00s DEBUG util.py:459: [233/387] Installing jbig2dec-libs-0:0. 100% | 7.2 MiB/s | 154.2 KiB | 00m00s DEBUG util.py:459: [234/387] Installing adobe-mappings-pdf 100% | 25.0 MiB/s | 4.4 MiB | 00m00s DEBUG util.py:459: [235/387] Installing libX11-common-0:1. 100% | 11.0 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [236/387] Installing libX11-0:1.8.11-1. 100% | 21.7 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [237/387] Installing libXrender-0:0.9.1 100% | 3.1 MiB/s | 47.0 KiB | 00m00s DEBUG util.py:459: [238/387] Installing libXext-0:1.3.6-3. 100% | 5.3 MiB/s | 86.7 KiB | 00m00s DEBUG util.py:459: [239/387] Installing libXi-0:1.8.2-2.fc 100% | 4.5 MiB/s | 69.3 KiB | 00m00s DEBUG util.py:459: [240/387] Installing libXtst-0:1.2.5-2. 100% | 2.4 MiB/s | 34.3 KiB | 00m00s DEBUG util.py:459: [241/387] Installing libXcomposite-0:0. 100% | 2.5 MiB/s | 41.7 KiB | 00m00s DEBUG util.py:459: [242/387] Installing libXpm-0:3.5.17-5. 100% | 7.1 MiB/s | 137.8 KiB | 00m00s DEBUG util.py:459: [243/387] Installing libXt-0:1.3.1-2.fc 100% | 13.1 MiB/s | 390.2 KiB | 00m00s DEBUG util.py:459: [244/387] Installing graphite2-0:1.3.14 100% | 2.4 MiB/s | 195.5 KiB | 00m00s DEBUG util.py:459: [245/387] Installing harfbuzz-0:10.4.0- 100% | 23.4 MiB/s | 3.0 MiB | 00m00s DEBUG util.py:459: [246/387] Installing freetype-0:2.13.3- 100% | 16.0 MiB/s | 803.4 KiB | 00m00s DEBUG util.py:459: [247/387] Installing fontconfig-0:2.16. 100% | 476.1 KiB/s | 758.0 KiB | 00m02s DEBUG util.py:459: [248/387] Installing libgs-0:10.05.1-1. 100% | 34.0 MiB/s | 23.7 MiB | 00m01s DEBUG util.py:459: [249/387] Installing libXft-0:2.3.8-8.f 100% | 7.5 MiB/s | 153.7 KiB | 00m00s DEBUG util.py:459: [250/387] Installing mkfontscale-0:1.2. 100% | 680.7 KiB/s | 50.4 KiB | 00m00s DEBUG util.py:459: [251/387] Installing ttmkfdir-0:3.0.9-7 100% | 1.5 MiB/s | 119.7 KiB | 00m00s DEBUG util.py:459: [252/387] Installing xorg-x11-fonts-Typ 100% | 708.4 KiB/s | 865.6 KiB | 00m01s DEBUG util.py:459: [253/387] Installing java-21-openjdk-1: 100% | 6.7 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [254/387] Installing netpbm-0:11.10.00- 100% | 6.8 MiB/s | 575.0 KiB | 00m00s DEBUG util.py:459: [255/387] Installing gts-0:0.7.6-50.201 100% | 2.8 MiB/s | 583.7 KiB | 00m00s DEBUG util.py:459: [256/387] Installing libimagequant-0:4. 100% | 10.2 MiB/s | 639.0 KiB | 00m00s DEBUG util.py:459: [257/387] Installing gd-0:2.3.3-18.fc42 100% | 8.1 MiB/s | 408.6 KiB | 00m00s DEBUG util.py:459: [258/387] Installing pixman-0:0.44.2-2. 100% | 5.0 MiB/s | 448.6 KiB | 00m00s DEBUG util.py:459: [259/387] Installing cairo-0:1.18.2-3.f 100% | 15.7 MiB/s | 1.7 MiB | 00m00s DEBUG util.py:459: [260/387] Installing pango-0:1.56.3-1.f 100% | 4.7 MiB/s | 972.2 KiB | 00m00s DEBUG util.py:459: [261/387] Installing lasi-0:1.1.3-16.fc 100% | 2.4 MiB/s | 119.4 KiB | 00m00s DEBUG util.py:459: [262/387] Installing cairo-gobject-0:1. 100% | 991.8 KiB/s | 39.7 KiB | 00m00s DEBUG util.py:459: [263/387] Installing rsvg-pixbuf-loader 100% | 5.5 MiB/s | 306.7 KiB | 00m00s DEBUG util.py:459: [264/387] Installing librsvg2-0:2.60.0- 100% | 24.0 MiB/s | 5.0 MiB | 00m00s DEBUG util.py:459: [265/387] Installing sgml-common-0:0.6. 100% | 1.5 MiB/s | 174.9 KiB | 00m00s DEBUG util.py:459: [266/387] Installing docbook-dtds-0:1.0 100% | 6.4 MiB/s | 8.3 MiB | 00m01s DEBUG util.py:459: [267/387] Installing docbook-style-xsl- 100% | 9.6 MiB/s | 15.9 MiB | 00m02s DEBUG util.py:459: [268/387] Installing libusb1-0:1.0.28-2 100% | 756.2 KiB/s | 164.1 KiB | 00m00s DEBUG util.py:459: >>> Running sysusers scriptlet: tpm2-tss-0:4.1.3-6.fc42.riscv64 DEBUG util.py:459: >>> Finished sysusers scriptlet: tpm2-tss-0:4.1.3-6.fc42.riscv64 DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating group 'tss' with GID 59. DEBUG util.py:459: >>> Creating user 'tss' (Account used for TPM access) with UID 59 and GID 59. DEBUG util.py:459: >>> DEBUG util.py:459: [269/387] Installing tpm2-tss-0:4.1.3-6 100% | 19.5 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [270/387] Installing tpm2-tss-fapi-0:4. 100% | 20.2 MiB/s | 910.4 KiB | 00m00s DEBUG util.py:459: [271/387] Installing gnupg2-0:2.4.7-2.f 100% | 23.2 MiB/s | 11.2 MiB | 00m00s DEBUG util.py:459: [272/387] Installing gpgme-0:1.24.2-1.f 100% | 6.0 MiB/s | 557.4 KiB | 00m00s DEBUG util.py:459: [273/387] Installing gpgmepp-0:1.24.2-1 100% | 17.2 MiB/s | 441.3 KiB | 00m00s DEBUG util.py:459: [274/387] Installing poppler-0:25.02.0- 100% | 27.0 MiB/s | 3.9 MiB | 00m00s DEBUG util.py:459: [275/387] Installing poppler-glib-0:25. 100% | 15.7 MiB/s | 612.8 KiB | 00m00s DEBUG util.py:459: [276/387] Installing kbd-misc-0:2.7.1-3 100% | 10.4 MiB/s | 2.6 MiB | 00m00s DEBUG util.py:459: [277/387] Installing kbd-legacy-0:2.7.1 100% | 6.3 MiB/s | 623.5 KiB | 00m00s DEBUG util.py:459: [278/387] Installing kbd-0:2.7.1-3.fc42 100% | 4.1 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: >>> Running sysusers scriptlet: systemd-udev-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Finished sysusers scriptlet: systemd-udev-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating group 'systemd-coredump' with GID 998. DEBUG util.py:459: >>> Creating user 'systemd-coredump' (systemd Core Dumper) with UID 998 and GID DEBUG util.py:459: >>> DEBUG util.py:459: >>> Running sysusers scriptlet: systemd-udev-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Finished sysusers scriptlet: systemd-udev-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Creating group 'systemd-timesync' with GID 997. DEBUG util.py:459: >>> Creating user 'systemd-timesync' (systemd Time Synchronization) with UID 997 DEBUG util.py:459: >>> DEBUG util.py:459: [279/387] Installing systemd-udev-0:257 100% | 4.4 MiB/s | 11.9 MiB | 00m03s DEBUG util.py:459: >>> Running post-install scriptlet: systemd-udev-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Finished post-install scriptlet: systemd-udev-0:257.6-1.fc42.riscv64 DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Failed to preset unit: Unit system-systemdx2dcryptsetup.slice does not exist DEBUG util.py:459: >>> DEBUG util.py:459: [280/387] Installing tzdata-0:2025b-1.f 100% | 4.4 MiB/s | 1.9 MiB | 00m00s DEBUG util.py:459: [281/387] Installing python-pip-wheel-0 100% | 30.3 MiB/s | 1.2 MiB | 00m00s DEBUG util.py:459: [282/387] Installing mpdecimal-0:4.0.1- 100% | 9.2 MiB/s | 206.5 KiB | 00m00s DEBUG util.py:459: [283/387] Installing libb2-0:0.98.1-13. 100% | 1.6 MiB/s | 46.8 KiB | 00m00s DEBUG util.py:459: [284/387] Installing python3-libs-0:3.1 100% | 23.5 MiB/s | 40.1 MiB | 00m02s DEBUG util.py:459: [285/387] Installing python3-0:3.13.3-2 100% | 386.6 KiB/s | 30.2 KiB | 00m00s DEBUG util.py:459: [286/387] Installing llvm-0:20.1.5-1.0. 100% | 28.6 MiB/s | 79.5 MiB | 00m03s DEBUG util.py:459: [287/387] Installing python3-attrs-0:25 100% | 9.1 MiB/s | 410.6 KiB | 00m00s DEBUG util.py:459: [288/387] Installing python3-rpds-py-0: 100% | 16.2 MiB/s | 747.3 KiB | 00m00s DEBUG util.py:459: [289/387] Installing python3-referencin 100% | 9.5 MiB/s | 330.6 KiB | 00m00s DEBUG util.py:459: [290/387] Installing python3-packaging- 100% | 12.1 MiB/s | 568.0 KiB | 00m00s DEBUG util.py:459: [291/387] Installing python3-rpm-genera 100% | 5.1 MiB/s | 82.9 KiB | 00m00s DEBUG util.py:459: [292/387] Installing python3-jsonschema 100% | 2.0 MiB/s | 55.5 KiB | 00m00s DEBUG util.py:459: [293/387] Installing llvm-test-0:20.1.5 100% | 13.2 MiB/s | 1.9 MiB | 00m00s DEBUG util.py:459: [294/387] Installing graphviz-0:12.2.1- 100% | 26.3 MiB/s | 21.2 MiB | 00m01s DEBUG util.py:459: [295/387] Installing python3-pefile-0:2 100% | 15.6 MiB/s | 656.4 KiB | 00m00s DEBUG util.py:459: [296/387] Installing python3-zstandard- 100% | 25.5 MiB/s | 2.2 MiB | 00m00s DEBUG util.py:459: [297/387] Installing python3-pyparsing- 100% | 17.8 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [298/387] Installing systemtap-sdt-dtra 100% | 2.2 MiB/s | 180.9 KiB | 00m00s DEBUG util.py:459: [299/387] Installing python3-ply-0:3.11 100% | 15.1 MiB/s | 570.3 KiB | 00m00s DEBUG util.py:459: [300/387] Installing python3-pycparser- 100% | 14.7 MiB/s | 812.0 KiB | 00m00s DEBUG util.py:459: [301/387] Installing python3-cffi-0:1.1 100% | 18.1 MiB/s | 1.3 MiB | 00m00s DEBUG util.py:459: [302/387] Installing python3-cryptograp 100% | 17.9 MiB/s | 5.0 MiB | 00m00s DEBUG util.py:459: [303/387] Installing hwdata-0:0.396-1.f 100% | 32.9 MiB/s | 9.5 MiB | 00m00s DEBUG util.py:459: [304/387] Installing pciutils-0:3.13.0- 100% | 2.8 MiB/s | 234.1 KiB | 00m00s DEBUG util.py:459: [305/387] Installing sysprof-capture-de 100% | 21.6 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [306/387] Installing libffi-devel-0:3.4 100% | 1.6 MiB/s | 30.9 KiB | 00m00s DEBUG util.py:459: [307/387] Installing glib2-devel-0:2.84 100% | 28.2 MiB/s | 15.9 MiB | 00m01s DEBUG util.py:459: [308/387] Installing openssh-0:9.9p1-11 100% | 11.5 MiB/s | 1.4 MiB | 00m00s DEBUG util.py:459: [309/387] Installing openssh-clients-0: 100% | 13.9 MiB/s | 3.4 MiB | 00m00s DEBUG util.py:459: [310/387] Installing gettext-envsubst-0 100% | 1.0 MiB/s | 80.8 KiB | 00m00s DEBUG util.py:459: [311/387] Installing gettext-runtime-0: 100% | 4.2 MiB/s | 461.9 KiB | 00m00s DEBUG util.py:459: [312/387] Installing clang-resource-fil 100% | 926.4 KiB/s | 16.7 KiB | 00m00s DEBUG util.py:459: [313/387] Installing clang-libs-0:20.1. 100% | 31.1 MiB/s | 110.0 MiB | 00m04s DEBUG util.py:459: [314/387] Installing systemtap-sdt-deve 100% | 8.2 MiB/s | 184.3 KiB | 00m00s DEBUG util.py:459: [315/387] Installing perl-devel-4:5.40. 100% | 21.4 MiB/s | 8.1 MiB | 00m00s DEBUG util.py:459: [316/387] Installing ncurses-c++-libs-0 100% | 4.5 MiB/s | 152.7 KiB | 00m00s DEBUG util.py:459: [317/387] Installing ncurses-devel-0:6. 100% | 3.5 MiB/s | 1.0 MiB | 00m00s DEBUG util.py:459: [318/387] Installing libedit-devel-0:3. 100% | 2.4 MiB/s | 67.0 KiB | 00m00s DEBUG util.py:459: [319/387] Installing device-mapper-pers 100% | 15.1 MiB/s | 2.8 MiB | 00m00s DEBUG util.py:459: [320/387] Installing libmnl-0:1.0.5-7.f 100% | 3.0 MiB/s | 52.2 KiB | 00m00s DEBUG util.py:459: [321/387] Installing popt-devel-0:1.19- 100% | 2.0 MiB/s | 30.0 KiB | 00m00s DEBUG util.py:459: [322/387] Installing libuuid-devel-0:2. 100% | 2.4 MiB/s | 43.8 KiB | 00m00s DEBUG util.py:459: [323/387] Installing less-0:679-1.fc42. 100% | 4.7 MiB/s | 439.0 KiB | 00m00s DEBUG util.py:459: [324/387] Installing libubsan-0:15.1.1- 100% | 12.9 MiB/s | 384.1 KiB | 00m00s DEBUG util.py:459: [325/387] Installing libasan-0:15.1.1-2 100% | 23.3 MiB/s | 1.5 MiB | 00m00s DEBUG util.py:459: [326/387] Installing fuse-libs-0:2.9.9- 100% | 10.3 MiB/s | 286.1 KiB | 00m00s DEBUG util.py:459: [327/387] Installing libdwarves1-0:1.30 100% | 14.6 MiB/s | 583.2 KiB | 00m00s DEBUG util.py:459: [328/387] Installing procps-ng-0:4.0.4- 100% | 8.4 MiB/s | 1.1 MiB | 00m00s DEBUG util.py:459: [329/387] Installing xz-devel-1:5.8.1-2 100% | 8.8 MiB/s | 262.6 KiB | 00m00s DEBUG util.py:459: [330/387] Installing systemd-boot-unsig 100% | 10.2 MiB/s | 218.9 KiB | 00m00s DEBUG util.py:459: [331/387] Installing make-1:4.4.1-10.fc 100% | 12.1 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [332/387] Installing gcc-0:15.1.1-2.fc4 100% | 29.1 MiB/s | 129.0 MiB | 00m04s DEBUG util.py:459: [333/387] Installing rust-std-static-0: 100% | 32.6 MiB/s | 163.3 MiB | 00m05s DEBUG util.py:459: [334/387] Installing rust-0:1.87.0-2.fc 100% | 30.0 MiB/s | 92.6 MiB | 00m03s DEBUG util.py:459: [335/387] Installing cargo-0:1.87.0-2.f 100% | 26.2 MiB/s | 20.4 MiB | 00m01s DEBUG util.py:459: [336/387] Installing gcc-c++-0:15.1.1-2 100% | 28.4 MiB/s | 51.8 MiB | 00m02s DEBUG util.py:459: [337/387] Installing clang-0:20.1.5-1.0 100% | 3.3 MiB/s | 342.8 KiB | 00m00s DEBUG util.py:459: [338/387] Installing clippy-0:1.87.0-2. 100% | 25.4 MiB/s | 12.6 MiB | 00m00s DEBUG util.py:459: [339/387] Installing rustfmt-0:1.87.0-2 100% | 21.6 MiB/s | 6.6 MiB | 00m00s DEBUG util.py:459: [340/387] Installing annobin-plugin-gcc 100% | 12.5 MiB/s | 994.8 KiB | 00m00s DEBUG util.py:459: [341/387] Installing gcc-plugin-annobin 100% | 788.3 KiB/s | 50.5 KiB | 00m00s DEBUG util.py:459: [342/387] Installing systemd-ukify-0:25 100% | 1.2 MiB/s | 91.0 KiB | 00m00s DEBUG util.py:459: [343/387] Installing elfutils-devel-0:0 100% | 7.7 MiB/s | 197.8 KiB | 00m00s DEBUG util.py:459: [344/387] Installing dracut-0:105-3.fc4 100% | 7.7 MiB/s | 1.9 MiB | 00m00s DEBUG util.py:459: [345/387] Installing dwarves-0:1.30-1.f 100% | 4.1 MiB/s | 402.7 KiB | 00m00s DEBUG util.py:459: [346/387] Installing fuse-devel-0:2.9.9 100% | 5.9 MiB/s | 126.4 KiB | 00m00s DEBUG util.py:459: [347/387] Installing git-core-0:2.49.0- 100% | 30.9 MiB/s | 32.1 MiB | 00m01s DEBUG util.py:459: [348/387] Installing libbabeltrace-deve 100% | 4.1 MiB/s | 105.5 KiB | 00m00s DEBUG util.py:459: [349/387] Installing libmnl-devel-0:1.0 100% | 7.5 MiB/s | 206.2 KiB | 00m00s DEBUG util.py:459: [350/387] Installing lvm2-0:2.03.30-3.f 100% | 9.0 MiB/s | 3.3 MiB | 00m00s DEBUG util.py:459: >>> Running post-install scriptlet: lvm2-0:2.03.30-3.fc42.riscv64 DEBUG util.py:459: >>> Finished post-install scriptlet: lvm2-0:2.03.30-3.fc42.riscv64 DEBUG util.py:459: >>> Scriptlet output: DEBUG util.py:459: >>> Created symlink '/etc/systemd/system/sysinit.target.wants/lvm2-monitor.servi DEBUG util.py:459: >>> Created symlink '/etc/systemd/system/sysinit.target.wants/lvm2-lvmpolld.sock DEBUG util.py:459: >>> DEBUG util.py:459: [351/387] Installing llvm-devel-0:20.1. 100% | 16.2 MiB/s | 29.6 MiB | 00m02s DEBUG util.py:459: [352/387] Installing perl-ExtUtils-Embe 100% | 1.2 MiB/s | 16.1 KiB | 00m00s DEBUG util.py:459: [353/387] Installing bindgen-cli-0:0.71 100% | 20.0 MiB/s | 5.2 MiB | 00m00s DEBUG util.py:459: [354/387] Installing gettext-0:0.23.1-2 100% | 19.0 MiB/s | 5.1 MiB | 00m00s DEBUG util.py:459: [355/387] Installing pciutils-devel-0:3 100% | 5.6 MiB/s | 108.7 KiB | 00m00s DEBUG util.py:459: [356/387] Installing asciidoc-0:10.2.0- 100% | 10.1 MiB/s | 1.7 MiB | 00m00s DEBUG util.py:459: [357/387] Installing python3-jsonschema 100% | 7.0 MiB/s | 908.9 KiB | 00m00s DEBUG util.py:459: [358/387] Installing python3-devel-0:3. 100% | 9.2 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [359/387] Installing python3-docutils-0 100% | 12.4 MiB/s | 5.0 MiB | 00m00s DEBUG util.py:459: [360/387] Installing python3-pip-0:24.3 100% | 14.8 MiB/s | 11.6 MiB | 00m01s DEBUG util.py:459: [361/387] Installing python3-pyyaml-0:6 100% | 9.9 MiB/s | 737.3 KiB | 00m00s DEBUG util.py:459: [362/387] Installing python3-setuptools 100% | 8.4 MiB/s | 8.6 MiB | 00m01s DEBUG util.py:459: [363/387] Installing tpm2-tools-0:5.7-3 100% | 8.5 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [364/387] Installing xmlto-0:0.0.29-2.f 100% | 1.4 MiB/s | 122.1 KiB | 00m00s DEBUG util.py:459: [365/387] Installing java-21-openjdk-de 100% | 28.2 MiB/s | 11.1 MiB | 00m00s DEBUG util.py:459: [366/387] Installing net-tools-0:2.0-0. 100% | 5.7 MiB/s | 973.7 KiB | 00m00s DEBUG util.py:459: [367/387] Installing perl-generators-0: 100% | 1.3 MiB/s | 23.2 KiB | 00m00s DEBUG util.py:459: [368/387] Installing kernel-rpm-macros- 100% | 2.0 MiB/s | 39.0 KiB | 00m00s DEBUG util.py:459: [369/387] Installing authselect-0:1.5.1 100% | 1.7 MiB/s | 154.0 KiB | 00m00s DEBUG util.py:459: [370/387] Installing pam-0:1.7.0-6.fc42 100% | 7.5 MiB/s | 1.6 MiB | 00m00s DEBUG util.py:459: [371/387] Installing audit-libs-devel-0 100% | 2.7 MiB/s | 114.4 KiB | 00m00s DEBUG util.py:459: [372/387] Installing lld-0:20.1.5-1.0.r 100% | 465.9 KiB/s | 47.5 KiB | 00m00s DEBUG util.py:459: [373/387] Installing newt-devel-0:0.52. 100% | 6.4 MiB/s | 125.5 KiB | 00m00s DEBUG util.py:459: [374/387] Installing libtracefs-devel-0 100% | 2.0 MiB/s | 28.0 KiB | 00m00s DEBUG util.py:459: [375/387] Installing numactl-devel-0:2. 100% | 1.8 MiB/s | 27.7 KiB | 00m00s DEBUG util.py:459: [376/387] Installing bison-0:3.8.2-9.fc 100% | 16.2 MiB/s | 3.5 MiB | 00m00s DEBUG util.py:459: [377/387] Installing libbpf-devel-2:1.5 100% | 13.4 MiB/s | 397.4 KiB | 00m00s DEBUG util.py:459: [378/387] Installing binutils-devel-0:2 100% | 35.4 MiB/s | 99.9 MiB | 00m03s DEBUG util.py:459: [379/387] Installing bpftool-0:7.5.0-3. 100% | 6.8 MiB/s | 723.4 KiB | 00m00s DEBUG util.py:459: [380/387] Installing systemd-rpm-macros 100% | 432.8 KiB/s | 11.3 KiB | 00m00s DEBUG util.py:459: [381/387] Installing rust-src-0:1.87.0- 100% | 19.5 MiB/s | 33.3 MiB | 00m02s DEBUG util.py:459: [382/387] Installing rsync-0:3.4.1-3.fc 100% | 5.8 MiB/s | 792.1 KiB | 00m00s DEBUG util.py:459: [383/387] Installing openssl-devel-1:3. 100% | 4.3 MiB/s | 5.2 MiB | 00m01s DEBUG util.py:459: [384/387] Installing openssl-1:3.2.4-3. 100% | 9.2 MiB/s | 1.8 MiB | 00m00s DEBUG util.py:459: [385/387] Installing libcap-devel-0:2.7 100% | 1.8 MiB/s | 51.0 KiB | 00m00s DEBUG util.py:459: [386/387] Installing hostname-0:3.25-2. 100% | 393.6 KiB/s | 44.1 KiB | 00m00s DEBUG util.py:459: [387/387] Installing bc-0:1.08.1-2.fc42 100% | 15.0 KiB/s | 236.4 KiB | 00m16s DEBUG util.py:459: Warning: skipped OpenPGP checks for 385 packages from repository: build DEBUG util.py:459: Complete! DEBUG util.py:608: Child return code was: 0 DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30-bootstrap/root/var/lib/mock/f42-spacemit-83-30/root'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/sys/fs/selinux'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '/var/lib/mock/f42-spacemit-83-30/root/proc/filesystems'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/dev/pts'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/dev/shm'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/sys'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG util.py:556: Executing command: ['/bin/umount', '-n', '-l', '/var/lib/mock/f42-spacemit-83-30/root/proc'] with env {'TERM': 'vt100', 'SHELL': '/bin/sh', 'HOME': '/builddir', 'HOSTNAME': 'mock', 'PATH': '/usr/bin:/bin:/usr/sbin:/sbin', 'LANG': 'C.UTF-8'} and shell False DEBUG util.py:608: Child return code was: 0 DEBUG util.py:634: child environment: None DEBUG backend.py:816: Copying packages to result dir DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30/root DEBUG util.py:183: kill orphans in chroot /var/lib/mock/f42-spacemit-83-30-bootstrap/root